Key Facts
- Product Range: A2FO Fixed Pumps, A2FM Fixed Motors, A2FE Plug-in Motors.
- Max Working Pressure: Up to 400 bar nominal (450 bar peak).
- Displacement Range: 5 to 500 cc/rev.
- Design: Bent-axis axial piston design.
- Applications: Mobile machinery, industrial equipment, winches, and wheel drives.
Explore Our Axial Piston Series
Select the right series for your application:
- A2FO Fixed Pumps: Designed for open circuits. Provides hydraulic fluid to actuators.
- A2FM Fixed Motors: Designed for open and closed circuits. Converts hydraulic energy into rotary mechanical energy.
- A2FE Plug-in Motors: Designed for direct integration into mechanical gearboxes (e.g., wheel drives) without a separate housing.
- BVD/BVE Counterbalance Valves: For safe load holding on winches and travel drives.
Selection Support
Not sure which pump or motor displacement fits your system? Tell us your required torque, speed, and pressure, and our engineers will provide the correct model code.
Frequently Asked Questions
Q: What does "bent-axis design" mean?
A: In a bent-axis pump/motor, the cylinder block is positioned at an angle to the drive shaft. This design allows for high pressure capability, high speeds, and high overall efficiency.
Q: Can these components be used in both open and closed circuits?
A: The A2FO pumps are for open circuits. The A2FM and A2FE motors can be used in both open and closed circuits.
Contact
For axial piston pump and motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.