| Size | Displacement (cc/rev) | Nominal Pressure (bar) | Max Flow (L/min) | Max Speed (rpm) | Weight (kg) | Flange | Ports |
|---|---|---|---|---|---|---|---|
| 5 | 4.93 | 315 | 49 | 10,000 | 2.5 | ISO 3019-2 | DIN 3852 / SAE |
| 10 | 10.3 | 400 | 82 | 8,000 | 5.4 | ISO 3019-2 | DIN 3852 / SAE |
| 12 | 12 | 400 | 96 | 8,000 | 5.4 | ISO 3019-2 | DIN 3852 / SAE |
| 16 | 16 | 400 | 128 | 8,000 | 9.5 | ISO 3019-2 | DIN 3852 / SAE |
| 23 | 22.9 | 400 | 144 | 6,300 | 9.5 | ISO 3019-2 | DIN 3852 / SAE |
| 28 | 28.1 | 400 | 177 | 6,300 | 10.5 | ISO 3019-2 | DIN 3852 / SAE |
| 32 | 32 | 400 | 202 | 6,300 | 10.5 | ISO 3019-2 | DIN 3852 / SAE |
| 45 | 45.6 | 400 | 255 | 6,300 | 15.0 | ISO 3019-2 | DIN 3852 / SAE |
| 56 | 56.1 | 400 | 281 | 5,600 | 18.0 | ISO 3019-2 | DIN 3852 / SAE |
| 63 | 63 | 400 | 315 | 5,000 | 18.0 | ISO 3019-2 | DIN 3852 / SAE |
| 80 | 80.4 | 400 | 362 | 5,000 | 23.0 | ISO 3019-2 | DIN 3852 / SAE |
| 90 | 90 | 400 | 405 | 4,500 | 23.0 | ISO 3019-2 | DIN 3852 / SAE |
| 107 | 106.7 | 400 | 427 | 4,500 | 32.0 | ISO 3019-2 | DIN 3852 / SAE |
| 125 | 125 | 400 | 500 | 4,000 | 34.0 | ISO 3019-2 | DIN 3852 / SAE |
| 160 | 160.4 | 400 | 577 | 3,600 | 47.0 | ISO 3019-2 | SAE Flange |
| 180 | 180 | 400 | 648 | 3,600 | 47.0 | ISO 3019-2 | SAE Flange |
| 200 | 200 | 400 | 550 | 2,750 | 82.0 | ISO 3019-2 | SAE Flange |
| 250 | 250 | 350 | 675 | 2,700 | 110.0 | ISO 3019-2 | SAE Flange |
| 355 | 355 | 350 | 795 | 2,240 | 155.0 | ISO 3019-2 | SAE Flange |
| 500 | 500 | 350 | 1000 | 2,000 | 200.0 | ISO 3019-2 | SAE Flange |
Data source: Technical data table.
The A2FM motor uses hydraulic pressure to push pistons that are angled relative to the drive shaft. This creates torque that rotates the shaft. The output speed is proportional to the input flow and inversely proportional to the motor's displacement.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help selecting the correct displacement or shaft type? Explore specific models: A2FM32 Motor or contact our engineers with your system specifications.
Q: What is the difference between A2FO and A2FM?
A: A2FO is a pump (converts mechanical energy to hydraulic energy). A2FM is a motor (converts hydraulic energy to mechanical energy).
Q: Can the A2FM be used in a closed circuit?
A: Yes, the A2FM series is suitable for both open and closed circuits.
Q: What is the minimum speed for smooth operation?
A: The minimum speed is typically around 50 rpm to ensure smooth operation.
For A2FM series motor selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.