Key Facts
- Storage Environment: Dry, dust-free, and free of corrosive gases.
- Temperature: Ideal between +5°C and +20°C.
- Preservation: Standard protection lasts 12 months; long-term protection lasts 24 months.
- Maintenance: Check oil cleanliness and inspect for leaks regularly.
1. Storage Conditions
- Store in a dry, enclosed room with an average temperature between +5°C and +20°C.
- Avoid direct sunlight, UV radiation, and ozone-generating equipment.
- Do not stack the pumps/motors.
- Keep the original anti-corrosion packaging intact. If the packaging is damaged, the warranty may be void.
2. Long-Term Storage (Over 12 Months)
If storing for more than 12 months:
- Inspect the pump/motor for corrosion and damage.
- Perform a test run to check functions and leaks.
- Replace the shaft seal if the storage period exceeds 24 months.
3. Unpacked Storage
If the pump/motor has been unpacked and needs to be stored:
- Clean the unit and drain all oil.
- Fill with mineral oil (for up to 12 months) or inject 20 ml of anti-corrosion agent (for up to 24 months).
- Seal all ports and apply a preservative agent to unpainted surfaces.
- Wrap the unit in anti-corrosion film with a desiccant.
4. Routine Maintenance
- Check Oil Level: Check the hydraulic tank level daily.
- Oil Temperature: Check the working temperature weekly.
- Oil Analysis: Perform oil analysis (viscosity, aging, particle contamination) annually or every 2000 operating hours.
- Leak Inspection: Check for external leaks daily.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Selection Support
Need spare parts for your A2F pump or motor? Explore our A2FM Fixed Motors or contact our engineers for maintenance support.
Frequently Asked Questions
Q: What is the maximum storage time for an A2F pump with standard protection?
A: The standard anti-corrosion protection is valid for up to 12 months in a suitable enclosed environment.
Q: How often should I change the hydraulic oil?
A: It is recommended to change the oil annually or every 2000 operating hours, whichever comes first, unless oil analysis confirms it is still within specifications.
Q: What should I do if the pump was stored for 3 years?
A: The shaft seal should be replaced, and the pump should be inspected by a qualified technician before being put into operation.
Contact
For storage and maintenance support, contact HYRIG: info@hyrig.com
Related Pages