BVD/BVE Counterbalance Valves | Safe Load Holding for Motors

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the BVD and BVE counterbalance valve range and their spare parts. These valves are designed for direct mounting onto A2FM and A2FE motors to prevent overspeeding and cavitation during braking, lowering loads, or downhill travel in open circuits.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Valve Type: Counterbalance / Brake Valve
  • Series: BVD (Double-acting) / BVE (Single-acting)
  • Nominal Size: 20, 25
  • Max Working Pressure: 420 bar (Peak)
  • Max Flow Rate: Up to 320 L/min
  • Mounting: Direct SAE flange mounting to hydraulic motors

BVD/BVE Specifications & Model Comparison

ModelTypeSizeMax Flow (L/min)Max PressureApplication
BVD20Double-acting20220420 barTravel drives
BVD25Double-acting25320420 barTravel / Winch
BVE25Single-acting25320420 barWinch drives

Data source: Technical data table.

Dimensions

Mounting parameters for the BVD/BVE valves:

ParameterSpecification
Mounting InterfaceSAE J518 (Direct motor mounting)
Port ConnectionsA, B, S (Flange ports)
WeightApprox. 9 kg to 15 kg

Structure / Working Principle

The counterbalance valve maintains a back pressure on the return line to prevent the motor from running ahead of the pump flow. When inlet pressure drops, the valve throttles the return flow to brake the motor until the inlet pressure recovers (typically to around 20 bar). The BVE is single-acting and used specifically for winch drives, while the BVD is double-acting for travel drives.

How to Order (Model Code)

The BVD/BVE model code includes the size, control range, release option, and damping.

  • Control Range: `F` (7-30 bar for travel), `W` (20-40 bar for winch).
  • Release Option: `S` (High pressure), `L` (Reduced pressure for brake release).

Example: `BVD20F27S/41B-V03K16D0400S12` = BVD20, travel drive control, size 27 ports, S release, damping D0400.

Applications

  • Winch drives (Cranes, marine winches) - Usually BVE.
  • Travel drives (Excavators, wheel loaders) - Usually BVD.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Need help matching a counterbalance valve to your A2FM motor? Contact our engineers with your motor model and application details.

Frequently Asked Questions

Q: What is the difference between BVD and BVE?
A: BVD is a double-acting valve used for travel drives (forward/reverse). BVE is a single-acting valve used for winch drives (lifting/lowering).

Q: Can the counterbalance valve replace a mechanical parking brake?
A: No, the counterbalance valve cannot replace the mechanical parking brake. A proper mechanical brake system must be provided.

Q: What is the maximum working pressure of the BVD/BVE series?
A: The nominal pressure is 350 bar with a peak pressure of 420 bar.

Contact

For BVD/BVE counterbalance valve selection and spare parts, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit