A2F Flushing and Boost Valves | Motor Cooling & Lubrication

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the flushing and boost valve range for A2F series motors. These valves are designed to direct low-pressure oil from the motor's low-pressure side into the motor housing. This ensures continuous cooling and lubrication, especially important in closed circuits where heat can build up.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Valve Type: Flushing and Boost Valve
  • Setting Pressure: 16 bar (Relief valve)
  • Switching Pressure: 8 ± 1 bar
  • Mounting: Directly on the motor (Port plate 027, 017, or 029)
  • Function: Cools the motor and prevents overheating

Specifications & Model Comparison

FeatureSpecification
Relief Valve Setting16 bar
Switching Pressure (Δp)8 ± 1 bar
Standard Flushing Flow3.5 to 16 L/min (depends on orifice size)

Data source: Technical data table.

Structure / Working Principle

The valve extracts hot oil from the low-pressure side of the closed loop and directs it through the motor case. A relief valve maintains a minimum boost pressure (16 bar) in the motor case, ensuring the case is always full of oil for lubrication. The flushing flow is determined by a built-in orifice.

How to Order

Specify the motor model and the port plate number (e.g., 027, 017) to ensure the flushing valve is integrated correctly.

Applications

  • Closed-loop hydrostatic drives
  • Continuous operation under high load
  • Winch and travel drives

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Need help choosing the correct flushing valve for your A2FM motor? Contact our engineers with your motor model.

Frequently Asked Questions

Q: Why is a flushing valve needed?
A: In closed circuits, the oil does not return to the tank frequently. A flushing valve ensures a continuous flow of cool oil through the motor case, preventing overheating and extending motor life.

Q: What is the standard flushing flow rate?
A: The flow rate depends on the orifice installed, typically ranging from 3.5 to 16 L/min.

Q: Can the flushing valve be installed on an existing motor?
A: It is usually ordered as part of the motor (integrated valve plate). Retrofitting requires a compatible valve plate.

Contact

For flushing and boost valve selection for A2F motors, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit