Proportional Valve Amplifiers | VT-2000, VT-3000 & VT-5000

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the proportional valve amplifier range and their spare parts. These electronic modules convert command signals into the correct current to control proportional solenoids. Choose from the VT-2000 series (simple pressure/flow control), VT-3000 series (directional valve control), or VT-5000 series (closed-loop control with feedback).
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Series: VT-2000, VT-3000, VT-5000.
  • Control Types: Open-loop (without feedback) and Closed-loop (with feedback).
  • Input Signal: 0-10V or 4-20mA (differs by model).
  • Power Supply: 24V DC (or AC via rectifier).
  • Mounting: EURO card rack (VT-3002, VT-1516, VT-1700).

Amplifier Series Comparison

SeriesApplicationFeedbackTypical Models
VT-2000Pressure & Flow ValvesNoVT-2000, VT-2010
VT-3000Proportional Directional ValvesNoVT-3000, VT-3006, VT-3013
VT-5000Closed-loop valves & Flow valvesYesVT-5001, VT-5005, VT-5010

Data source: Technical data table.

Amplifier Selection Guide

Valve SeriesRecommended Amplifier
4WRA6 / 4WRA10VT-3013 / VT-3014 (or VT-3017 / VT-3018)
4WRE6 / 4WRE10VT-5005 / VT-5006 (or VT-5024 / VT-5025)
4WRZ10-32VT-3000 / VT-3006
DBET / DBETEVT-2000 / VT-2010
DBETRVT-5003
2FRE6 / 2FRE10/16VT-5010 / VT-5004

Rack Systems

  • VT-3002: For single EURO card (basic rack).
  • VT-1516: For single EURO card with power supply (110V/220V to 24V).
  • VT-1700: For dual EURO cards with power supply.

Cross-Reference & Replacement

Replacing an old amplifier? Check:

  1. Valve Type: Ensure the amplifier matches the valve's sensor type (if applicable).
  2. Input Signal: Check if your system uses 0-10V or 4-20mA.
  3. Rack: Ensure the rack has the correct slot count and power supply.

Applications

Used in all types of hydraulic systems requiring proportional control, from simple pressure regulation to complex closed-loop position and speed control.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Need help matching your valve with the correct amplifier or rack system? Contact our engineers with your valve model and system requirements.

Frequently Asked Questions

Q: What is the difference between open-loop and closed-loop amplifiers?
A: Open-loop amplifiers (VT-3000) just send current to the solenoid. Closed-loop amplifiers (VT-5000) also read the position sensor feedback to precisely control the valve spool.

Q: Can I use a VT-3000 with a 4WRE6 valve?
A: No, the 4WRE6 requires a closed-loop amplifier like the VT-5005, because it has a position sensor that needs to be read.

Q: What is the function of the VT-1516 rack?
A: The VT-1516 is a rack system that includes a built-in power supply, converting 110V or 220V AC to the 24V DC required by the amplifier cards.

Contact

For proportional valve amplifier selection and spare parts, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit