| Model | Nominal Size | Max Pressure | Max Flow (L/min) | Functions |
|---|---|---|---|---|
| ZDC10 | DN10 | 35 MPa | 85 | P or PT |
| ZDC16 | DN16 | 35 MPa | 150 | P or PT |
| ZDC25 | DN25 | 35 MPa | 325 | P or PT |
Data source: Technical data table.
Mounting parameters for the ZDC series:
| Parameter | Specification |
|---|---|
| Mounting Interface | ISO 4401-05 / 07 / 08 |
| Port Connections | A, B, P, T, X, Y (O-ring sizes vary) |
| Height | Approx. 50 mm to 83 mm |
The ZDC pressure compensator uses a load-sensing principle. It senses the pressure at port P1 (downstream of the proportional valve) and compares it with the pressure at port P (upstream). The compensator adjusts its opening to maintain a constant pressure drop (e.g., 1 MPa) across the proportional valve. This ensures that the flow rate is proportional to the valve opening, regardless of load changes.
`ZDC` + `Size (10/16/25)` + `Function (P/PT)` + `20` + `Pilot Oil (Internal/External)`.
Example: `ZDC10P-20/X` = DN10, 2-way function, external pilot oil.
Replacing an old compensator? Check:
Used in combination with proportional directional valves (4WRA, 4WRE, 4WRZ) to achieve precise, load-independent speed control.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing between P and PT functions? Contact our engineers with your system schematic.
Q: What is the function of a pressure compensator?
A: It maintains a constant pressure drop across the proportional valve, ensuring the flow rate remains stable even if the load pressure changes.
Q: What is the difference between P and PT functions?
A: P (2-way) reduces the flow going to the valve. PT (3-way) bypasses excess flow to the tank, which is useful for fixed-displacement pumps.
Q: Does it require an external pilot line?
A: It depends on the version. The standard version uses internal pilot oil, while the /X version requires an external pilot line.
For ZDC pressure compensator selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.