PQ10 Proportional Pressure & Flow Composite Valve

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the PQ10 proportional pressure and flow composite valve range and their spare parts. The PQ10 combines a proportional flow control valve and a proportional pressure relief valve in one unit. It matches the pump pressure to the load pressure, providing significant energy savings.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Valve Type: Proportional Pressure and Flow Composite Valve
  • Nominal Size: DN10
  • Max Working Pressure: 14 MPa
  • Max Flow Rate: 125 L/min
  • Functions: Flow control (1-125 L/min) and Pressure control (0.8-14 MPa)
  • Energy Saving: Maintains a pressure difference of 0.6-0.9 MPa above the load.

PQ10 Specifications & Model Comparison

ModelNominal SizeMax PressureMax Flow (L/min)Control Type
PQ10DN1014 MPa125Pressure & Flow
2FRE6 ValveDN621 MPa25Flow only
ZDC ValveDN10-2535 MPa325Pressure Compensator

Data source: Technical data table.

Dimensions

Mounting parameters for the PQ10 valve:

ParameterSpecification
Mounting InterfaceCustom manifold interface
WeightApprox. 16.0 kg
Control PortsP, A, T, Y, X (Remote control)

Structure / Working Principle

The PQ10 consists of a main valve, a proportional relief valve, a safety valve, and a proportional throttle valve. The proportional throttle adjusts the flow to the actuator, while the pressure compensator adjusts the pump pressure to maintain a constant pressure difference (0.6-0.9 MPa) across the throttle. This allows the pump to supply only the pressure required by the load, saving energy. The proportional relief valve sets the maximum system pressure.

How to Order (Model Code)

`PQ` + `10` + `20` + `140` + `125` + `Options`.

  • 140: 14 MPa pressure range.
  • 125: 125 L/min maximum flow.

Example: `PQ10-20/140-125/M` = DN10, 14 MPa, 125 L/min, mineral oil.

Cross-Reference & Replacement

Replacing an old valve? Check:

  1. Control Wiring: This valve requires two separate amplifier channels: one for the pressure control (e.g., VT-5003) and one for the flow control (e.g., VT-5010).
  2. Flow Requirement: Ensure 125 L/min is sufficient for your system.

Applications

Used in injection molding machines and hydraulic presses where energy efficiency and precise control of pressure and speed are critical.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Need help configuring the dual amplifiers for the PQ10? Contact our engineers with your system specifications.

Frequently Asked Questions

Q: What is the maximum working pressure for the PQ10?
A: The PQ10 is rated for a maximum working pressure of 14 MPa.

Q: How does the PQ10 save energy?
A: It maintains the pump pressure only 0.6-0.9 MPa above the load pressure, reducing throttling losses compared to fixed-displacement systems.

Q: Can the pressure and flow be controlled independently?
A: Yes, the pressure and flow are controlled by separate proportional solenoids and can be adjusted independently.

Contact

For PQ10 composite valve selection and spare parts, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit