| Model | Nominal Size | Max Pressure | Max Flow (L/min) | Feedback Type |
|---|---|---|---|---|
| 2FRE6 | DN6 | 21 MPa | 25 | Inductive Sensor |
| 2FRE10/16 Valve | DN10/16 | 21 MPa | 160 | Inductive Sensor |
| PQ10 Valve | DN10 | 14 MPa | 125 | Pressure & Flow |
Data source: Technical data table.
Mounting parameters for the 2FRE6 valve:
| Parameter | Specification |
|---|---|
| Mounting Interface | ISO 4401-03 (CETOP 3) |
| Bolt Pattern | 4 x M5 threaded holes (40.5 x 40.5 mm) |
| Port Connections | A, B, P, T (Requires O-ring 9.25 x 1.78 mm) |
| Weight | Approx. 4.0 kg |
The 2FRE6 uses a proportional solenoid to adjust the opening of a control throttle. A pressure compensator is connected upstream to maintain a constant pressure drop across the throttle, ensuring the flow rate remains constant regardless of load pressure. The inductive position sensor provides closed-loop feedback to the amplifier, ensuring the throttle opening precisely matches the command signal.
`2FRE6` + `Control Type (A/B)` + `20` + `Flow Range` + `Options`.
Example: `2FRE6B-20/16Q` = Internal control, 16 L/min flow range.
Replacing an old valve? Check:
Used in injection molding machines, machine tools, and testing equipment for precise and stable speed control.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing the correct flow range or control type? Contact our engineers with your system specifications.
Q: What is the maximum flow rate for the 2FRE6?
A: The 2FRE6 supports a maximum flow rate of 25 L/min.
Q: What is the difference between A and B control types?
A: A type uses external control pressure (port P), while B type uses internal control pressure to keep the pressure compensator closed until the valve is energized, preventing startup jump.
Q: Which amplifier is required for the 2FRE6?
A: The VT-5010 series amplifier is designed specifically for the 2FRE6.
For 2FRE6 proportional flow control valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.