A8 Stripper Reflux Pumps – API 610 BB, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 A8 stripper reflux pumps are available in BB, OH, and VS designs, specifically engineered for returning benzene/toluene reflux – a benzene‑rich stream (approximately 44% benzene, 54% toluene) – to the top of A8 stripper columns in aromatics complexes. BB pumps provide superior rotor stability for high‑flow, high‑head main reflux duties. OH pumps offer compact solutions for smaller reflux or booster services, while VS pumps handle low‑NPSH suction from reflux accumulators. Built with stainless steel and alloy materials to resist aromatic corrosion. Fully API 610/ISO 13709 and NACE compliant for safe, reliable reflux service.

Conatct For Details
DetailReview(0)Additional

Our API 610 A8 stripper reflux pumps are heavy‑duty centrifugal pumps engineered specifically for returning benzene/toluene reflux to the top of A8 stripper columns in aromatics complexes and petrochemical plants. The A8 stripper is a key unit in aromatics production following the adsorption separation or isomerization section, where light aromatic components (benzene, toluene) are separated from heavier C8 aromatics. The overhead reflux stream consists of a benzene/toluene mixture with a typical composition of approximately 44% benzene and 54% toluene, with minor amounts of xylenes and ethylbenzene. This reflux stream is returned to the top tray of the column to control temperature profiles, maintain separation efficiency, and ensure product quality.

The reflux stream is characterized by high volatility, low viscosity, moderate vapour pressure, low NPSH availability, and contains toxic, flammable aromatic hydrocarbons that demand absolute leak‑tight sealing and fugitive emission control. Pumps for this service demand excellent low Net Positive Suction Head (NPSH) performance, absolute vapour‑tight sealing to prevent fugitive emissions, and materials resistant to aromatic corrosion. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for continuous, reliable, and safe operation. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – with the BB type often preferred for main reflux duties requiring high head and stable flow.

API 610 Classifications for A8 Stripper Reflux Duties

  • BB – Between Bearings Pumps
    For main high‑capacity benzene/toluene reflux return to A8 stripper columns, BB pumps provide superior rotor rigidity and smooth, stable flow. BB2 (radially split, single‑stage or two‑stage) and BB3 (axially split, multistage) configurations are commonly specified for flows from 20 to 2,000 m³/h and heads up to 400 metres. The between‑bearings arrangement minimises shaft deflection and vibration – critical for handling volatile, low‑viscosity aromatic streams. Axially split BB3 casings allow easy internal inspection without disturbing piping, while radially split BB2 casings offer superior pressure containment.

  • OH – Overhung Pumps
    In A8 stripper reflux systems, OH pumps are typically employed for smaller reflux duties, booster services, or startup circulation where pressures are lower. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes provide compact, cost‑effective solutions for auxiliary services. Centreline mounting accommodates thermal expansion.

  • VS – Vertically Suspended Pumps
    In applications where the reflux accumulator is at grade level with limited NPSH, VS pumps provide excellent suction performance. VS1 (vertical turbine) and VS6 (vertical can/barrel) types submerge the impeller below the liquid level, eliminating cavitation and priming problems. Their vertical footprint saves valuable plot space.

Key Performance & Design Features

  • Pressure Capability – Designed for discharge pressures from 5 barg up to 40 barg, matching A8 stripper column operating conditions.

  • Flow & Head – Capacities from 10 m³/h to 2,500 m³/h; heads typically from 50 to 400 metres, with multistage configurations for higher heads.

  • Temperature Range – Engineered for benzene/toluene mixtures from ambient to 110°C (230°F), with appropriate material selection.

  • NPSH Performance – VS and specially designed BB/OH pumps with inducers achieve very low NPSH requirements (often <1.5 metres), critical for volatile aromatic streams.

  • Materials – Wetted parts in stainless steels (304, 316L, duplex), and corrosion‑resistant alloys to withstand aromatic corrosion and maintain product purity. Full NACE MR0175/ISO 15156 compliance available for sour service.

  • Sealing – API 682 mechanical seals – dual (tandem or pressurised) seals are mandatory for aromatic service to prevent fugitive emissions and product loss. Suitable flush plans (Plan 11, 13, 32, 53A/B, 62) with cooling and quench to maintain seal integrity. Dry gas seals are also available for zero‑emission compliance.

  • Casing Design – Radially or axially split casings with heavy‑wall construction for pressure integrity; vapour‑tight connections and API 614 sealing systems to prevent leakage.

  • Bearing & Lubrication – Heavy‑duty rolling element or sleeve bearings with oil mist, forced oil, or grease; vibration and temperature monitoring for predictive maintenance.

  • Impeller Options – Closed impellers for efficient handling; special hydraulics with low‑NPSH first stages to optimise suction performance.

Typical Applications

  • Benzene/toluene reflux return to A8 stripper columns in aromatics complexes

  • Reflux pumping in aromatics fractionation and purification trains

  • Benzene/toluene reflux in petrochemical separation units

  • Reflux circulation in aromatics stripping and distillation systems

Industries Served

  • Petrochemicals (aromatics production, benzene/toluene separation)

  • Oil refineries (catalytic reforming, aromatics complexes)

  • Chemical processing (aromatic purification)

Why Choose Our A8 Stripper Reflux Pumps?

With extensive experience in volatile aromatic hydrocarbon handling and full API 610 compliance, we design and manufacture A8 stripper reflux pumps that deliver exceptional safety, reliability, and efficiency. Every pump undergoes rigorous performance testing, hydrostatic tests, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet the most stringent international specifications. We offer customised hydraulic designs, material selections, and seal systems to match your specific benzene/toluene reflux composition, operating pressure, and temperature. Our engineering support includes NPSH analysis, API 684 rotor dynamics, vapour pressure evaluation, and emissions control advisory to ensure long‑term, trouble‑free operation.

Contact Us

For technical datasheets, application engineering advice, or a project‑specific quotation, please contact us at:

info@hyrig.com

Rely on our API 610 A8 stripper reflux pumps to deliver reliable, safe benzene/toluene reflux for your critical aromatics fractionation processes.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit