Reformate Splitter Bottom Pumps – API 610 BB2, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 reformate splitter bottom pumps are available in BB2, OH, and VS designs, specifically engineered for transferring C8+ aromatic bottoms – approximately 41% xylenes, 9% ethylbenzene, and trace toluene – from reformate splitter columns to storage or downstream processing in aromatics complexes. BB2 pumps with radially split between‑bearings construction are the preferred choice for reliable high‑temperature bottom duty, delivering stable flow with excellent rotor rigidity and thermal expansion management. OH pumps serve smaller applications, while VS pumps handle low‑NPSH suction. Built with carbon steel, stainless, and corrosion‑resistant alloys. Fully API 610/ISO 13709 compliant for long‑life, reliable service.

Conatct For Details
DetailReview(0)Additional

Our API 610 reformate splitter bottom pumps are heavy‑duty centrifugal pumps engineered specifically for transferring C8+ aromatic bottoms from reformate splitter columns to storage or downstream processing in aromatics complexes, petrochemical plants, and catalytic reforming units. The reformate splitter (also called a reformate fractionator) is a critical unit in aromatics production that separates reformate – the product of catalytic reforming – into light and heavy aromatic fractions. The bottom product is a C8+ aromatic stream with a typical composition of approximately 41% xylenes (including para‑xylene, ortho‑xylene, meta‑xylene), 8.6% ethylbenzene, 0.08% toluene, and negligible benzene. This C8+ aromatic bottoms stream is a valuable feedstock for para‑xylene (PX) extraction units, ethylbenzene recovery, and xylenes production.

The bottom stream is characterized by elevated temperatures (typically 170‑220°C), moderate volatility, low viscosity, and often contains trace sulfur compounds. Pumps for this service demand robust construction, reliable sealing, and stable flow control to maintain column stability and product quality. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for continuous, reliable, and safe operation. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – with the BB2 type (radially split, single‑stage or two‑stage) being the preferred choice for main bottom product transfer duties due to its superior rotor stability and thermal expansion management.

API 610 Classifications for Reformate Splitter Bottom Duties

  • BB2 – Between Bearings Pumps (Preferred for Main Bottom Product Transfer)
    For the main C8+ aromatic bottoms transfer from the reformate splitter column, the BB2 subtype (radially split, single‑stage or two‑stage, between‑bearings) is the preferred configuration. The radially split casing allows the pump to expand evenly with temperature without distorting internal clearances – critical when handling streams with significant temperature differentials. The between‑bearings arrangement provides exceptional rotor rigidity, minimising shaft deflection and vibration. Single‑stage BB2 pumps handle moderate to high flows (50‑1,500 m³/h) at heads up to 200 metres, while two‑stage variants cover higher head requirements. Centreline support accommodates thermal expansion.

  • OH – Overhung Pumps
    In reformate splitter systems, OH pumps are typically employed for smaller transfer duties, booster services, or auxiliary applications where flows are lower. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes provide compact, cost‑effective solutions for auxiliary roles. Centreline mounting ensures thermal expansion does not misalign the pump and driver.

  • VS – Vertically Suspended Pumps
    VS pumps are used where the column bottom has very low NPSH or where floor space is limited. VS1 (vertical turbine) and VS6 (vertical can/barrel) types submerge the first‑stage impeller below the liquid level, providing excellent NPSH performance. They are also used in closed‑loop systems where floor space is limited.

Key Performance & Design Features (BB2 Focus)

  • Temperature Capability – Engineered for C8+ aromatic temperatures up to 220°C (428°F), with appropriate material selection and thermal expansion allowances.

  • Flow & Head – Capacities from 20 m³/h to over 1,500 m³/h; heads typically from 50 to 200 metres.

  • Casing Design – Radially split casing with centreline support to accommodate thermal expansion without distortion. Heavy‑wall construction for pressure integrity at elevated temperatures.

  • Materials – Wetted parts in carbon steel (ASTM A216 WCB), chrome‑moly steels, or stainless steels (304, 316L) depending on service conditions. Full NACE MR0175/ISO 15156 compliance available for sour service.

  • Sealing – API 682 mechanical seals (single, dual, or tandem) with appropriate flush plans – typically Plan 11 (internal recirculation), Plan 32 (clean injected flush), or Plan 53 (pressurised dual seal) – to ensure seal integrity and prevent product leakage.

  • Bearing & Lubrication – Heavy‑duty sleeve or rolling element bearings with forced oil or oil mist lubrication; bearing temperature and vibration monitoring for predictive maintenance.

  • Impeller Options – Closed impellers for efficient handling; all dynamically balanced per API 610.

  • Thermal Expansion – Adequate internal clearances, expansion joints, and flexible coupling designs to accommodate temperature gradients.

Typical Applications

  • C8+ aromatic bottoms transfer from reformate splitter columns

  • Xylene/ethylbenzene rich product transfer to para‑xylene (PX) extraction units

  • Reformate splitter bottom pumping in aromatics complexes

  • C8+ aromatic supply to storage or downstream isomerization units

  • Any aromatics fractionator handling C8+ aromatic bottom streams

Industries Served

  • Petrochemicals (aromatics production, para‑xylene units)

  • Oil refineries (catalytic reforming, aromatics complexes)

  • Chemical processing (C8 aromatic separation and purification)

Why Choose Our Reformate Splitter Bottom Pumps?

With deep expertise in aromatics handling and full API 610 compliance, we design and manufacture reformate splitter bottom pumps that deliver unmatched reliability, safety, and efficiency. Every pump undergoes rigorous hydrostatic testing, performance curve verification, mechanical running tests, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet the most stringent owner‑operator specifications. We offer customised hydraulic designs, material upgrades, and sealing arrangements tailored to your specific C8+ aromatic composition, temperature, and flow requirements. Our engineering support includes API 684 rotor dynamics, thermal expansion analysis, and NPSH margin studies to ensure seamless, long‑term operation in the most demanding aromatics fractionation services.

Contact Us

For technical datasheets, application engineering advice, or a project‑specific quotation, please contact us at:

info@hyrig.com

Trust our API 610 reformate splitter bottom pumps to deliver reliable C8+ aromatic product transfer for your aromatics production processes.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit