| Attribute | Value |
|---|---|
| Product Type | Air-actuated, severe heavy-duty (SHD) clutch |
| Compatible Series | EATON AIRFLEX SHD configurations |
| Plate Configuration | 3 plates |
| SHD Designation | Severe Heavy Duty; reinforced for extreme loads |
| Typical Host | Extreme duty drawworks, workover rigs |
| Replacement Compatibility | Form-fit-function replacement; verify shaft bore and adapter bolt pattern |
> Data source: Technical data table.
| Parameter | Value |
|---|---|
| Size / Diameter | 24 in |
| Plate Count | 3 |
| Static Torque | Confirm exact configuration with HYRIG |
| Maximum Speed | Confirm exact configuration with HYRIG |
| Dimension Item | Reference / Action |
|---|---|
| Bore Range | Confirm shaft diameter and keyway |
| Driving Ring Bolt Pattern | Measure adapter bolt circle |
| Overall Diameter | 24 in nominal |
The SHD (Severe Heavy Duty) design uses reinforced pressure plates, heavier release springs, and upgraded friction materials to withstand extreme shock loads and continuous heavy-duty cycles without premature wear.
Verify:
Important boundary: This page covers the Eaton Airflex SHD324 platform. If you are replacing a WPT Power Grip 324SHD, verify the specific brand and dimensions with HYRIG.
Extreme duty drawworks and workover rigs.
Internal links:
Extreme duty drilling rig applications requiring maximum shock load resistance.
Not sure whether you have an Airflex SHD324 or a WPT 324SHD? Send HYRIG the clutch nameplate photo and shaft dimensions for positive identification.
Q: Is this the same as the WPT 324SHD?
They refer to similar severe-duty specifications but are different brand platforms. Confirm interface measurements with HYRIG.
Q: Can I buy only the friction discs without the complete assembly?
Yes, friction discs and wear components are available; confirm part numbers against your original drawing.
Q: What is the lead time?
Standard lead time is quoted per order; for urgent downtime, confirm with HYRIG at inquiry.
For SHD324 clutch selection and replacement parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.