Airflex & WPT Clutch Parts | Replacement Wear Components

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply compatible replacement wear components for EATON AIRFLEX and WPT pneumatic clutches and brakes. Find friction discs, air tubes, wear plates, and seals for your specific model. Eaton Airflex® is a registered trademark of Eaton Corporation. WPT Power Grip® is a registered trademark of WPT Power Corporation. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by these companies.
Conatct For Details
DetailReview(0)Additional

Key Facts

AttributeValue
Product TypeReplacement wear components
Compatible SeriesAirflex WCB, WPT Power Grip, Eaton PDC
Key ComponentsFriction discs, air tubes, wear plates, seals
Replacement CompatibilityReference part numbers; confirm against original drawing

> Data source: Technical data and parts list.

Airflex WCB Water Cooled Brake Parts

These components fit the Airflex WCB brake series. For complete model details, visit the Eaton Airflex WCB Series page.

ComponentReference Part No.Compatibility Note
Friction Disc512509Confirm against original drawing
Friction Disc Core512510Confirm against original drawing
Wear Plate512507Confirm against original drawing
Dual Piston514485Confirm single vs. dual piston configuration

WPT Power Grip Pneumatic Clutch Parts

These components fit the WPT Power Grip clutch series. For complete model details, visit the WPT Power Grip Series Overview page.

ComponentCompatibility Note
Friction Disc (1-plate to 3-plate)Verify plate count (e.g., 118 vs 318) before ordering
Air Tube AssemblyConfirm diameter and fitting type
Release SpringsConfirm spring rate and quantity per assembly
Driving Ring / Backing PlateMeasure adapter bolt circle

Eaton PDC Pneumatic Disc Clutch Parts

These components fit the Eaton PDC disc clutch series. For complete model details, visit the Eaton 118PDC Clutch page.

ComponentReference Part No. (Element)Compatibility Note
118PDC Element146597AConfirm against original drawing
218PDC Element146598AConfirm against original drawing
318PDC Element146599AConfirm against original drawing
330PDC Element146606AConfirm against original drawing

Compatible Host Models

These replacement components are used across the following host series:

> Host compatibility depends on exact configuration. Confirm your host model and existing interface details with HYRIG before order.

Cross-Reference & Replacement

Replacing wear components in a clutch or brake? Here is what to verify before ordering:

  1. Identify the product family — WCB brakes, WPT drum clutches, and PDC disc clutches use completely different friction components.
  2. Measure the friction disc — verify outer diameter, inner diameter, and thickness. If below the wear limit, replace the disc.
  3. Inspect the air tube — check for cracks or air leaks. Confirm the tube length and fitting type.
  4. Verify plate count — 1-plate, 2-plate, and 3-plate assemblies require different quantities of friction discs and springs.

Not sure about the exact part number? Send HYRIG the existing unit's nameplate photo and a measurement of the wear component. Engineers will match the correct replacement.

Selection Support

Not sure which friction disc or air tube fits your clutch? Send HYRIG the existing unit's nameplate photo, disc measurement, and assembly configuration. Engineers will confirm the correct part number and quote with lead time.

Frequently Asked Questions

Q: Are these original Eaton or WPT parts?
No. HYRIG supplies independent, compatible replacement products and is not affiliated with Eaton Corporation or WPT Power Corporation.

Q: How do I know if a PDC element fits my unit?
Confirm the part number (e.g., 146597A for 118PDC) against your original drawing or send the nameplate photo to HYRIG engineers.

Q: What is the lead time for wear components?
Standard lead time is quoted per order based on configuration; for urgent downtime, confirm with HYRIG engineers at inquiry.

Contact

For clutch and brake parts selection and compatible replacements, contact HYRIG: info@hyrig.com

What to include for fastest quote:

  • Existing unit nameplate photo
  • Part number or component measurement
  • Required quantity
  • Destination port
Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit