| Attribute | Value |
|---|---|
| Product Type | Air-applied, water-cooled brake element |
| Compatible Series | EATON AIRFLEX WCB configurations |
| Plate Configuration | 1 plate |
| Duty | Continuous slip / standard heat load |
| Cooling | Water-cooled friction interface |
| Typical Host | Standard drawworks, workover rigs |
| Actuation | Air tube or piston type — confirm existing configuration |
| Replacement Compatibility | Form-fit-function replacement; verify flange bolt pattern and water port thread |
> Data source: Technical data table.
| Parameter | Value |
|---|---|
| Size Designation | 114WCB (Size-code) / 14WCB (Inch) |
| Disc Diameter Basis | 14 in |
| Coolant Port | 1/4 SAE ORB (confirm against existing unit) |
| Typical Torque Capacity | Confirm specific configuration with HYRIG |
| Typical Weight | Approx. 1,100 lb / 500 kg reference |
| Dimension Item | Reference / Action |
|---|---|
| Disc Diameter Basis | 14 in (nominal, per model code) |
| Coolant Port Thread | 1/4 SAE ORB — match existing hose fittings |
| Mounting Flange Bolt Pattern | Measure existing adapter hole spacing center-to-center |
| Overall Housing Profile | Confirm clearance dimensions against existing installation envelope |
The 114WCB uses air pressure to clamp a single friction disc against water-cooled wear plates. Coolant circulates to carry away heat generated during continuous slip, keeping friction surface temperatures stable in sustained braking for standard drawworks.
Replacing an Airflex 114WCB unit? Here is what to verify before ordering:
Searching for "114WCB Clutch and Brake"?
The 114WCB is primarily a water-cooled brake for continuous slip. If your application requires clutch engagement/disengagement combined with braking, you must verify the specific mounting arrangement with HYRIG engineers before ordering.
Not sure which configuration you have? Send the existing unit's nameplate photo and flange measurements to HYRIG.
The 114WCB is commonly used as a drawworks auxiliary brake. Compatible host configurations include:
> Host compatibility depends on flange and port configuration. Confirm your host model with HYRIG before order.
Internal links:
Suitable for standard drilling rig drawworks auxiliary braking and workover rig continuous slip braking where sustained heat generation requires water-cooled friction management.
Not intended for: heavy-duty applications requiring 236WCB or larger thermal capacity.
Not sure whether the 114WCB or 214WCB is the correct replacement? Send HYRIG the existing unit's nameplate photo, flange measurements, and operating requirements. Engineers will confirm the compatible element and quote with lead time.
Q: Is this an original Eaton Airflex product?
No. HYRIG supplies independent, compatible replacement products and is not affiliated with Eaton Corporation.
Q: What is the difference between 114WCB and 14WCB?
They refer to the same platform using different naming conventions (size code vs. inch). Confirm the exact code on your nameplate.
Q: Can I use this for clutch engagement?
The 114WCB is a water-cooled brake for continuous slip, not a primary clutch. Confirm your specific clutch-and-brake arrangement with HYRIG engineers.
Q: What is the lead time for a 114WCB replacement?
Standard lead time is quoted per order based on configuration and quantity; for urgent downtime, confirm with HYRIG engineers at inquiry.
For 114WCB water cooled brake selection and compatible replacement parts, contact HYRIG: info@hyrig.com
What to include for fastest quote:
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.