214WCB Water Cooled Brake | Airflex Compatible Replacement

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply a compatible replacement for the EATON AIRFLEX 214WCB water cooled brake. The 214WCB is a two-plate, air-applied, water-cooled brake element designed for continuous slip and higher heat load on medium-duty drawworks. Eaton Airflex® is a registered trademark of Eaton Corporation. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by Eaton Corporation.
Conatct For Details
DetailReview(0)Additional

Key Facts

AttributeValue
Product TypeAir-applied, water-cooled brake element
Compatible SeriesEATON AIRFLEX WCB configurations
Plate Configuration2 plates
DutyContinuous slip / medium-high heat load
CoolingWater-cooled friction interface
Typical HostMedium-duty drawworks
ActuationAir tube or piston type — confirm existing configuration
Replacement CompatibilityForm-fit-function replacement; verify flange bolt pattern and water port thread

> Data source: Technical data table.

214WCB Specifications

ParameterValue
Size Designation214WCB (Size-code)
Disc Diameter Basis14 in
Plate Count2
Coolant Port1/4 SAE ORB (confirm against existing unit)
Typical Torque CapacityHigher than 114WCB; confirm specific configuration with HYRIG
Typical WeightConfirm with HYRIG for shipping weight

Dimensions

Dimension ItemReference / Action
Disc Diameter Basis14 in (nominal, per model code)
Coolant Port Thread1/4 SAE ORB — match existing hose fittings
Mounting Flange Bolt PatternMeasure existing adapter hole spacing center-to-center
Overall Housing ProfileConfirm clearance dimensions against existing installation envelope

Structure / Working Principle

The 214WCB uses air pressure to clamp two friction discs against water-cooled wear plates. The dual-plate design provides higher thermal capacity than the 114WCB, making it suitable for medium-duty drawworks where sustained braking generates more heat.

Cross-Reference & Replacement

Replacing an Airflex 214WCB unit? Here is what to verify before ordering:

  1. Mounting flange bolt pattern — measure the existing hole spacing.
  2. Water port thread — confirm coolant line fitting standard.
  3. Actuation type — confirm air tube vs. piston type.
  4. Friction disc wear — measure both discs. If below wear limit, replace the disc pack as a set.

Searching for "214WCB Clutch and Brake"?
The 214WCB is primarily a water-cooled brake. If your application requires clutch engagement combined with braking, verify the mounting arrangement with HYRIG engineers.

Compatible Host Models

The 214WCB is commonly used as a drawworks auxiliary brake. Compatible host configurations include:

  • Medium-duty drawworks auxiliary braking systems

> Host compatibility depends on flange and port configuration. Confirm your host model with HYRIG before order.

Internal links:

Applications

Suitable for medium-duty drilling rig drawworks auxiliary braking where sustained heat generation requires dual-disc water-cooled friction management.

Not intended for: light-duty applications where a 114WCB provides sufficient thermal capacity.

Selection Support

Not sure whether the 214WCB or 236WCB is the correct replacement? Send HYRIG the existing unit's nameplate photo, flange measurements, and operating requirements.

Frequently Asked Questions

Q: Is this an original Eaton Airflex product?
No. HYRIG supplies independent, compatible replacement products and is not affiliated with Eaton Corporation.

Q: What is the difference between 114WCB and 214WCB?
The 114WCB has 1 plate; the 214WCB has 2 plates. The 214WCB provides higher torque and thermal capacity.

Q: Can I buy only the friction discs without the complete element?
Friction discs are available as separate wear components; confirm the part number against the original drawing before ordering.

Q: What is the lead time?
Standard lead time is quoted per order based on configuration; for urgent downtime, confirm with HYRIG engineers at inquiry.

Contact

For 214WCB water cooled brake selection and compatible replacement parts, contact HYRIG: info@hyrig.com

What to include for fastest quote:

  • Existing unit nameplate photo
  • Mounting flange bolt pattern measurements
  • Water port thread type/size
  • Required quantity

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit