WCB Water Cooled Brake Parts | Airflex Compatible Wear Components

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply compatible replacement wear components for the EATON AIRFLEX WCB water cooled brake series. Find friction discs, wear plates, pressure plates, and seals for your specific model. Eaton Airflex® is a registered trademark of Eaton Corporation. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by Eaton Corporation.
Conatct For Details
DetailReview(0)Additional

Key Facts

AttributeValue
Product TypeReplacement wear components
Compatible SeriesEATON AIRFLEX WCB / WCB2 configurations
Key ComponentsFriction discs, wear plates, seals, pressure plates
Replacement CompatibilityReference part numbers; confirm against original drawing

> Data source: Technical data and parts list.

Friction System Components

ComponentReference Part No.Compatibility Note
Friction Disc512509Confirm against original drawing
Friction Disc Core512510Confirm against original drawing
Wear Plate512507Confirm against original drawing

Pressure & Cylinder Components

ComponentReference Part No.Compatibility Note
Dual Piston514485Confirm single vs. dual piston configuration
Pressure Plate513345Verify with existing assembly

Seals & Hardware

ComponentReference Part No.Compatibility Note
Clamp Tube306542-05Confirm length and fitting against original drawing
O-Ring000402X0042 / 000402X0044Confirm material compatibility

Compatible Host Models

These replacement components fit the following host models:

> Host compatibility depends on exact configuration. Confirm your host model and existing interface details with HYRIG before order.

Cross-Reference & Replacement

Replacing wear components in an Airflex WCB brake? Here is what to verify before ordering:

  1. Measure friction disc thickness — if below the wear limit, replace the disc and core together.
  2. Check wear plate surface — confirm the plate is not scored or below minimum thickness.
  3. Confirm piston configuration — single vs. dual piston assemblies require different replacement parts.
  4. Match clamp tube fittings — confirm length and thread against your existing assembly.

Not sure about the exact part number? Send HYRIG the existing unit's nameplate photo and a measurement of the wear component. Engineers will match the correct replacement.

Selection Support

Not sure which friction disc or wear plate fits your WCB brake? Send HYRIG the existing unit's nameplate photo, disc thickness measurement, and assembly configuration. Engineers will confirm the correct part number and quote with lead time. You can also browse our Eaton Airflex WCB Series for model-specific details.

Frequently Asked Questions

Q: Are these original Eaton Airflex parts?
No. HYRIG supplies independent, compatible replacement products and is not affiliated with Eaton Corporation.

Q: How do I know if the part number matches my unit?
Confirm the part number against your original drawing or send the existing unit's nameplate photo to HYRIG engineers for verification.

Q: What is the lead time for WCB wear components?
Standard lead time is quoted per order based on configuration; for urgent downtime, confirm with HYRIG engineers at inquiry.

Contact

For WCB water cooled brake parts selection and compatible replacements, contact HYRIG: info@hyrig.com

What to include for fastest quote:

  • Existing unit nameplate photo
  • Part number or component measurement
  • Required quantity
  • Destination port

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit