| Attribute | Value |
|---|---|
| Product Type | Air-applied, water-cooled brake element |
| Compatible Series | EATON AIRFLEX WCB configurations |
| Plate Configuration | 1 plate |
| Duty | Continuous slip / standard heat load |
| Cooling | Water-cooled friction interface |
| Typical Host | Standard drawworks |
| Designation Mapping | Also referred to as 24WCB (inch); smaller variants include 8WCB |
| Replacement Compatibility | Form-fit-function replacement; verify flange bolt pattern and water port thread |
> Data source: Technical data table.
| Parameter | Value |
|---|---|
| Size Designation | 124WCB (Size-code) / 24WCB (Inch) |
| Disc Diameter Basis | 24 in |
| Coolant Port | 1/4 SAE ORB (confirm against existing unit) |
| Typical Torque Capacity | Confirm specific configuration with HYRIG |
| Typical Weight | Approx. 1,200 lb / 544 kg reference |
| Variant Note | 8WCB uses the same basic platform with smaller diameter; confirm exact code on nameplate |
| Dimension Item | Reference / Action |
|---|---|
| Disc Diameter Basis | 24 in (nominal, per model code) |
| Coolant Port Thread | 1/4 SAE ORB — match existing hose fittings |
| Mounting Flange Bolt Pattern | Measure existing adapter hole spacing center-to-center |
| Overall Housing Profile | Confirm clearance dimensions against existing installation envelope |
| Weight | Approx. 1,200 lb; confirm lifting plan |
The 124WCB uses air pressure to clamp a single friction disc against a water-cooled wear plate. Coolant circulates to carry away heat generated during continuous slip, keeping friction surface temperatures stable in sustained braking for standard drawworks.
Replacing an Airflex 124WCB unit? Here is what to verify before ordering:
Not sure if you have a 124WCB or an 8WCB variant? Send the existing unit's nameplate photo to HYRIG; engineers will match the correct replacement element.
The 124WCB is commonly used as a drawworks auxiliary brake. Compatible host configurations include:
> Host compatibility depends on flange and port configuration. Confirm your host model with HYRIG before order.
Internal links:
Suitable for standard drilling rig drawworks auxiliary braking where sustained heat generation requires water-cooled friction management.
Not intended for: heavy-duty applications requiring 236WCB or larger thermal capacity.
Not sure whether the 124WCB or 236WCB is the correct replacement? Send HYRIG the existing unit's nameplate photo, flange measurements, and operating requirements.
Q: Is this an original Eaton Airflex product?
No. HYRIG supplies independent, compatible replacement products and is not affiliated with Eaton Corporation.
Q: What is the difference between 124WCB and 8WCB?
8WCB uses the same basic platform with a smaller diameter. Confirm the exact code on the nameplate and interface dimensions with HYRIG.
Q: Can I buy only the friction disc?
Friction discs are available as separate wear components; confirm the part number against the original drawing before ordering.
Q: What is the lead time for a 124WCB replacement?
Standard lead time is quoted per order based on configuration; for urgent downtime, confirm with HYRIG engineers at inquiry.
For 124WCB water cooled brake selection and compatible replacement parts, contact HYRIG: info@hyrig.com
What to include for fastest quote:
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.