| Attribute | Value |
|---|---|
| Product Type | Air-actuated, single-plate pneumatic clutch |
| Compatible Series | WPT Power Grip 18/21 series |
| Plate Configuration | 1 plate |
| Static Torque | 78,500 lb-in / 8,870 Nm @ 100 psi |
| Typical Host | Drawworks, workover rigs |
| Replacement Compatibility | Form-fit-function replacement; verify shaft bore and adapter bolt pattern |
> Data source: Technical data table.
| Parameter | Value |
|---|---|
| Size / Diameter | 18 in |
| Plate Count | 1 |
| Static Torque @ 100 psi | 78,500 lb-in (8,870 Nm) |
| Maximum Speed | 2,000 RPM |
| Air Actuation | Air tube type |
| Dimension Item | Reference / Action |
|---|---|
| Bore Range | Confirm existing shaft diameter and keyway dimensions before ordering |
| Driving Ring Bolt Pattern | Measure adapter bolt circle and hole diameter |
| Overall Diameter | 18 in nominal; confirm clearance |
The Power Grip 118 uses compressed air to inflate an air tube, pressing the friction disc against the driving ring. Release springs separate the plates when air is released, allowing smooth engagement under load without driveline shock.
Replacing a WPT Power Grip 118? Here is what to verify before ordering:
Important boundary: This page covers the WPT Power Grip 118 pneumatic clutch. It is not the Eaton 118PDC disc clutch or the 118WCB water-cooled brake.
The 118 is commonly used on drawworks main drum drives and workover rig drum drives.
Internal links:
Suitable for drilling rig drawworks drum engagement and in-line power transmission where smooth engagement under large inertia is required.
Not intended for: continuous slip braking duty (use a water-cooled brake).
Not sure whether the 118, 218, or 318 is correct? Send HYRIG the clutch nameplate photo, shaft diameter, and adapter bolt pattern.
Q: Is this the same as an Eaton 118PDC or 118WCB?
No. The WPT Power Grip 118 is a pneumatic drum clutch. The Eaton 118PDC is a disc clutch; the 118WCB is a brake.
Q: What is the lead time for a Power Grip 118?
Standard lead time is quoted per order based on bore configuration and quantity; confirm with HYRIG at inquiry.
Q: Can I buy only the friction disc or air tube?
Friction discs and air tubes are available as separate wear components; confirm the part number against your drawing.
For WPT Power Grip 118 clutch selection and replacement parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.