WPT Power Grip 318 Clutch | 18" 3-Plate Pneumatic

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply a compatible replacement for the WPT Power Grip 318 pneumatic clutch. The 318 is an 18-inch, three-plate air-actuated clutch providing maximum torque capacity within the 18-inch platform. WPT Power Grip® is a registered trademark of WPT Power Corporation. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by WPT Power Corporation.
Conatct For Details
DetailReview(0)Additional

Key Facts

AttributeValue
Product TypeAir-actuated, 3-plate pneumatic clutch
Compatible SeriesWPT Power Grip 18/21 series
Plate Configuration3 plates
Static Torque235,500 lb-in / 26,600 Nm @ 100 psi
Typical HostHeavy-duty drawworks
Replacement CompatibilityForm-fit-function replacement; verify shaft bore and adapter bolt pattern

> Data source: Technical data table.

WPT Power Grip 318 Specifications

ParameterValue
Size / Diameter18 in
Plate Count3
Static Torque @ 100 psi235,500 lb-in (26,600 Nm)
Maximum Speed1,500 RPM
Air ActuationAir tube type

Dimensions

Dimension ItemReference / Action
Bore RangeConfirm shaft diameter and keyway
Driving Ring Bolt PatternMeasure adapter bolt circle
Overall Diameter18 in nominal; confirm clearance

Structure / Working Principle

The 318 uses three friction discs for maximum torque. Air inflates the tube to clamp the plates.

Cross-Reference & Replacement

Verify shaft diameter, adapter bolt pattern, and plate count (3 plates).

Compatible Host Models

Heavy-duty drawworks drum drives.

Internal links:

Applications

Heavy-duty drawworks drum engagement.

Selection Support

Send HYRIG the existing nameplate photo and shaft dimensions for verification.

Frequently Asked Questions

Q: What is the maximum torque of the 318?
The static torque is 235,500 lb-in at 100 psi.

Q: Is this a direct replacement for the 118?
No. The 318 has 3 plates and higher torque; confirm clearance and shaft dimensions.

Q: What is the lead time?
Standard lead time is quoted per order; confirm with HYRIG at inquiry.

Contact

Contact HYRIG: info@hyrig.com

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit