| Attribute | Value |
|---|---|
| Product Type | Air-actuated, 2-plate pneumatic clutch |
| Compatible Series | WPT Power Grip 23/24 series |
| Plate Configuration | 2 plates |
| Static Torque | 290,000 lb-in / 32,760 Nm @ 100 psi |
| Typical Host | Heavy-duty drawworks |
| Replacement Compatibility | Form-fit-function replacement; verify shaft bore and adapter bolt pattern |
> Data source: Technical data table.
| Parameter | Value |
|---|---|
| Size / Diameter | 23 in |
| Plate Count | 2 |
| Static Torque @ 100 psi | 290,000 lb-in (32,760 Nm) |
| Maximum Speed | 1,400 RPM |
| Dimension Item | Reference / Action |
|---|---|
| Bore Range | Confirm shaft diameter and keyway |
| Driving Ring Bolt Pattern | Measure adapter bolt circle |
| Overall Diameter | 23 in nominal |
Air tube actuation clamps two friction discs for high torque transmission.
Verify shaft, adapter, and 2-plate configuration.
Heavy-duty drawworks.
Internal links:
Heavy-duty drawworks drum engagement.
Send HYRIG the nameplate photo and shaft dimensions.
Q: What is the difference between 236 and 336?
The 236 has 2 plates; the 336 has 3 plates for higher torque capacity.
Q: What is the lead time?
Standard lead time is quoted per order; confirm with HYRIG at inquiry.
Q: Can I buy wear parts separately?
Yes, friction discs and air tubes are available; verify part numbers.
Contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.