336WCB Water Cooled Brake | Airflex Compatible Replacement

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply a compatible replacement for the EATON AIRFLEX 336WCB water cooled brake. The 336WCB is a three-plate, air-applied, water-cooled brake element designed for continuous slip and high-heat conditions on heavy-duty drawworks. Eaton Airflex® is a registered trademark of Eaton Corporation. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by Eaton Corporation.
Conatct For Details
DetailReview(0)Additional

Key Facts

AttributeValue
Product TypeAir-applied, water-cooled brake element
Compatible SeriesEATON AIRFLEX WCB configurations
Plate Configuration3 plates
DutyContinuous slip / heavy-duty high-heat braking
CoolingWater-cooled friction interface
Typical HostHeavy-duty drawworks
Replacement CompatibilityForm-fit-function replacement; verify flange bolt pattern and water port thread

> Data source: Technical data table.

336WCB Specifications

ParameterValue
Size Designation336WCB (Size-code)
Disc Diameter Basis36 in
Plate Count3
Coolant Port1/4 SAE ORB
Typical Torque CapacityHigh torque capacity; confirm specific configuration with HYRIG
Typical WeightApprox. 4,100 lb / 1,860 kg housing reference

Dimensions

Dimension ItemReference / Action
Disc Diameter Basis36 in (nominal, per model code)
Coolant Port Thread1/4 SAE ORB — match existing hose fittings
Mounting Flange Bolt PatternMeasure existing adapter hole spacing center-to-center
Overall Housing ProfileConfirm clearance dimensions against existing installation envelope
WeightApprox. 4,100 lb; confirm lifting plan

Structure / Working Principle

The 336WCB uses air pressure to clamp three friction discs against water-cooled wear plates. Coolant circulates through the jackets to carry away heat generated during continuous slip. The multi-disc design provides higher thermal capacity than the 236WCB, making it suitable for heavy-duty drawworks.

Cross-Reference & Replacement

Replacing an Airflex 336WCB unit? Here is what to verify before ordering:

  1. Mounting flange bolt pattern — measure the existing hole spacing.
  2. Water port thread — confirm coolant line fitting standard.
  3. Actuation type — confirm air tube vs. piston type.
  4. Friction disc wear — measure all three discs. If below wear limit, replace the disc pack as a set.

Compatible Host Models

The 336WCB is commonly used as a heavy-duty drawworks auxiliary brake. Compatible host configurations include:

  • Heavy-duty drawworks auxiliary braking systems

> Host compatibility depends on flange and port configuration. Confirm your host model with HYRIG before order.

Internal links:

Applications

Suitable for heavy-duty drilling rig drawworks auxiliary braking where sustained heat generation requires multi-disc water-cooled friction management.

Not intended for: lighter duty applications where a 236WCB provides sufficient thermal capacity.

Selection Support

Not sure whether the 336WCB or 418WCB is the correct replacement? Send HYRIG the existing unit's nameplate photo, flange measurements, and operating requirements.

Frequently Asked Questions

Q: Is this an original Eaton Airflex product?
No. HYRIG supplies independent, compatible replacement products and is not affiliated with Eaton Corporation.

Q: What is the difference between 236WCB and 336WCB?
The 236WCB has 2 plates; the 336WCB has 3 plates. The 336WCB provides higher torque and thermal capacity for heavier duty.

Q: Can I buy only the friction discs without the complete element?
Friction discs and wear plates are available as separate wear components; confirm the part number against the original drawing.

Q: What is the lead time for a 336WCB replacement?
Standard lead time is quoted per order based on configuration; for urgent downtime, confirm with HYRIG engineers at inquiry.

Contact

For 336WCB water cooled brake selection and compatible replacement parts, contact HYRIG: info@hyrig.com

What to include for fastest quote:

  • Existing unit nameplate photo
  • Mounting flange bolt pattern measurements
  • Water port thread type/size
  • Required quantity

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit