418WCB Water Cooled Brake | Airflex Compatible Replacement

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply a compatible replacement for the EATON AIRFLEX 418WCB water cooled brake. The 418WCB is a four-plate, air-applied, water-cooled brake element designed for maximum continuous slip and high-torque conditions on large drawworks. Eaton Airflex® is a registered trademark of Eaton Corporation. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by Eaton Corporation.
Conatct For Details
DetailReview(0)Additional

Key Facts

AttributeValue
Product TypeAir-applied, water-cooled brake element
Compatible SeriesEATON AIRFLEX WCB configurations
Plate Configuration4 plates
DutyContinuous slip / maximum high-torque
CoolingWater-cooled friction interface
Typical HostLarge drawworks
Designation MappingAlso referred to as 48WCB (inch)
Replacement CompatibilityForm-fit-function replacement; verify flange bolt pattern and water port thread

> Data source: Technical data table.

418WCB Specifications

ParameterValue
Size Designation418WCB (Size-code) / 48WCB (Inch)
Disc Diameter Basis18 in per disc
Plate Count4
Coolant Port1/4 SAE ORB
Typical Torque CapacityMaximum torque capacity; confirm specific configuration with HYRIG
Typical WeightConfirm with HYRIG for shipping weight and lifting plan

Dimensions

Dimension ItemReference / Action
Disc Diameter Basis18 in per disc (nominal, per model code)
Coolant Port Thread1/4 SAE ORB — match existing hose fittings
Mounting Flange Bolt PatternMeasure existing adapter hole spacing center-to-center
Overall Housing ProfileConfirm clearance dimensions against existing installation envelope
WeightConfirm with HYRIG for shipping weight and lifting plan

Structure / Working Principle

The 418WCB uses air pressure to clamp four friction discs against water-cooled wear plates. The multi-disc design provides maximum thermal capacity, making it suitable for large drawworks where sustained braking generates extreme heat.

Cross-Reference & Replacement

Replacing an Airflex 418WCB unit? Here is what to verify before ordering:

  1. Mounting flange bolt pattern — measure the existing hole spacing.
  2. Water port thread — confirm coolant line fitting standard.
  3. Actuation type — confirm air tube vs. piston type.
  4. Friction disc wear — measure all four discs. If below wear limit, replace the disc pack as a set.

Compatible Host Models

The 418WCB is commonly used as a large drawworks auxiliary brake. Compatible host configurations include:

  • Large drawworks auxiliary braking systems

> Host compatibility depends on flange and port configuration. Confirm your host model with HYRIG before order.

Internal links:

Applications

Suitable for large drilling rig drawworks auxiliary braking where sustained heat generation requires maximum multi-disc water-cooled friction management.

Not intended for: lighter duty applications where a 236WCB or 336WCB provides sufficient thermal capacity.

Selection Support

Not sure whether the 418WCB or 336WCB is the correct replacement? Send HYRIG the existing unit's nameplate photo, flange measurements, and operating requirements.

Frequently Asked Questions

Q: Is this an original Eaton Airflex product?
No. HYRIG supplies independent, compatible replacement products and is not affiliated with Eaton Corporation.

Q: What is the difference between 418WCB and 48WCB?
They refer to the same platform using different naming conventions (size code vs. inch). Confirm the exact code on your nameplate.

Q: Can I buy only the friction discs without the complete element?
Friction discs and wear plates are available as separate wear components; confirm the part number against the original drawing.

Q: What is the lead time for a 418WCB replacement?
Standard lead time is quoted per order based on configuration; for urgent downtime, confirm with HYRIG engineers at inquiry.

Contact

For 418WCB water cooled brake selection and compatible replacement parts, contact HYRIG: info@hyrig.com

What to include for fastest quote:

  • Existing unit nameplate photo
  • Mounting flange bolt pattern measurements
  • Water port thread type/size
  • Required quantity

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit