CHD Tubing Spider | 250,000 lbs Workover Rating

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Model C and CHD tubing spider range and its spare parts. The CHD tubing spider is a pneumatic or hydraulic pipe-handling tool rated at 250,000 lbs (113,398 kg), designed to hold tubing strings from 1.315 to 5½ in. during workover operations.
Conatct For Details
DetailReview(0)Additional

CHD Tubing Spider | 250,000 lbs Load Rating

HYRIG can supply the Model C and CHD tubing spider range and its spare parts. The CHD tubing spider is a pneumatic or hydraulic pipe-handling tool rated at 250,000 lbs (113,398 kg), designed to hold tubing strings from 1.315 to 5½ in. (33.4 to 139.7 mm) during workover and well-service operations.

Key Facts

ParameterCHD
Load Rating250,000 lbs (113,398 kg)
Size Range1.315–5½ in. (33.4–139.7 mm)
ActuationHydraulic 300–500 PSI / Pneumatic 90–120 PSI
Weight457 lbs (207.3 kg)
Base Height18 in. (457.2 mm)
Bowl Opening17½ in. × 18 in. (444.5 × 457.2 mm)
Gate Opening6½ in. (165.1 mm)
MaterialHeat-treated alloy steel

Data source: Technical data table and parts list.

CHD Tubing Spider Specifications

ParameterModel CModel CHD
Load Rating165,000 lbs (74,843 kg)250,000 lbs (113,398 kg)
Size Range1.315–5½ in.1.315–5½ in.
Hydraulic Pressure300–500 PSI300–500 PSI
Pneumatic Pressure90–120 PSI90–120 PSI
Weight408 lbs (185.1 kg)457 lbs (207.3 kg)
Base Height16½ in. (419.1 mm)18 in. (457.2 mm)
Bowl Opening16½ × 18½ in.17½ × 18 in.
Gate Opening6 in. (152.4 mm)6½ in. (165.1 mm)

Explore the lighter-load model: Model C Tubing Spider. For the full range comparison, see Model C & CHD Tubing Spiders.

CHD Tubing Spider Dimensions

DimensionCHD Value
Base Height18 in. (457.2 mm)
Bowl Opening17½ in. × 18 in. (444.5 × 457.2 mm)
Gate Opening6½ in. (165.1 mm)
Base Bolt Slot Width1½ in. (38.1 mm)
Slot Centers12¾–16¼ in. (323.9–412.8 mm)
Weight457 lbs (207.3 kg)

Structure / Working Principle

The CHD spider uses a machined bowl taper that matches the slip bodies. A control valve actuates a pneumatic or hydraulic cylinder; the cylinder moves the slip assembly through lift arms, crank shafts and links. When the cylinder extends, the inserts engage the tubing; when it retracts, the slips lift clear of the bowl. The CHD base is thicker than the Model C base to carry the higher 250,000 lbs design load.

Cross-Reference & Replacement

Replacing a Model C with a CHD, or verifying a CHD retrofit? Check these points before ordering:

  1. Load requirement: Confirm your maximum tubing string load. CHD is rated at 250,000 lbs; C is rated at 165,000 lbs.
  2. Base height and bowl opening: CHD base height is 18 in. vs C 16½ in.; bowl opening differs. Verify the adapter plate or rotary table interface.
  3. Slip body and insert set: Select the slip body and insert set that matches your tubing OD.
  4. Actuation pressure: Verify the cylinder and hose ratings for 90–120 PSI pneumatic or 300–500 PSI hydraulic supply.

Compatible Host Models

The CHD tubing spider is used in workover and well-service operations with:

  • Workover rigs with rotary table or adapter plate mounting
  • Well-service rigs handling 1.315–5½ in. tubing
  • Pneumatic or hydraulic rig-floor control systems

For CHD replacement parts, see Model C & CHD Tubing Spider Parts.

Applications

The CHD tubing spider is used to hold the load of the tubing string during workover and well-service operations. It is suitable for:

  • Running and pulling 1.315–5½ in. tubing
  • Workover operations where string loads approach 250,000 lbs
  • Pneumatic or hydraulic rig-floor control systems
  • Operations requiring a removable gate to pass objects larger than the spider bore

Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.

Selection Support

Not sure whether the CHD or the Model C fits your string load? Tell us your maximum tubing OD, expected string weight, and actuation supply (pneumatic or hydraulic). Our engineers will confirm the correct model, slip body and insert set before you order.

Spare Parts

High-turnover replacement parts for the CHD spider include:

Part No.Part NameQty
65116Bolt (for Slips)4
65122Shaft Retaining Clip4
65124Crank Shaft Bushing4
65125Link Bushing2
65136Safety Bolt2
65140H1 / 651401Hydraulic / Pneumatic Cylinder1
65601Retainer Pin12

For the complete parts list including slip bodies and insert sets, see Model C & CHD Tubing Spider Parts.

Frequently Asked Questions

Q: What is the load rating of the CHD tubing spider?
A: The CHD tubing spider is rated at 250,000 lbs (113,398 kg), higher than the Model C rating of 165,000 lbs.

Q: What tubing size range does the CHD spider handle?
A: The CHD spider handles 1.315 to 5½ in. (33.4 to 139.7 mm) tubing with interchangeable slip bodies and insert sets.

Q: Can the CHD spider be operated hydraulically or pneumatically?
A: The CHD spider is available in both configurations. Hydraulic pressure is 300–500 PSI; pneumatic pressure is 90–120 PSI.

Q: How do I replace the slip inserts on a CHD spider?
A: Hold the slip bodies raised, remove the four cotter pins and retainer pins, slide the inserts out of the dovetail groove, clean and grease the body, install a full new insert set, and reinstall the retainer pins and cotter pins.

Q: What is the typical lead time for a CHD spider or replacement parts?
A: Lead time depends on configuration and stock status. For urgent downtime or year-end shutdown planning, contact HYRIG with your model, part numbers and quantity for a confirmed delivery estimate.

Q: Is the CHD spider a lifting product that requires special certification?
A: The CHD spider is a load-holding lifting tool rated at 250,000 lbs. Verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.

Contact

For CHD tubing spider selection and spare parts, contact HYRIG: info@hyrig.com

Please include: model (C or CHD), tubing OD range, actuation type (pneumatic/hydraulic), and required part numbers for the fastest quote.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit