HYRIG can supply the Model C and CHD tubing spider range and its spare parts. The Model C tubing spider is a pneumatic or hydraulic pipe-handling tool rated at 165,000 lbs (74,843 kg), designed to hold tubing strings from 1.315 to 5½ in. (33.4 to 139.7 mm) during workover and well-service operations.
| Parameter | Model C |
|---|---|
| Load Rating | 165,000 lbs (74,843 kg) |
| Size Range | 1.315–5½ in. (33.4–139.7 mm) |
| Actuation | Hydraulic 300–500 PSI / Pneumatic 90–120 PSI |
| Weight | 408 lbs (185.1 kg) |
| Base Height | 16½ in. (419.1 mm) |
| Bowl Opening | 16½ in. × 18½ in. (419.1 × 469.9 mm) |
| Gate Opening | 6 in. (152.4 mm) |
| Material | Heat-treated alloy steel |
Data source: Technical data table and parts list.
| Parameter | Model C | Model CHD |
|---|---|---|
| Load Rating | 165,000 lbs (74,843 kg) | 250,000 lbs (113,398 kg) |
| Size Range | 1.315–5½ in. | 1.315–5½ in. |
| Hydraulic Pressure | 300–500 PSI | 300–500 PSI |
| Pneumatic Pressure | 90–120 PSI | 90–120 PSI |
| Weight | 408 lbs (185.1 kg) | 457 lbs (207.3 kg) |
| Base Height | 16½ in. (419.1 mm) | 18 in. (457.2 mm) |
| Bowl Opening | 16½ × 18½ in. | 17½ × 18 in. |
| Gate Opening | 6 in. (152.4 mm) | 6½ in. (165.1 mm) |
Need a higher load rating? Explore the CHD Tubing Spider. For full specifications, see Model C & CHD Tubing Spiders.
| Dimension | Model C Value |
|---|---|
| Base Height | 16½ in. (419.1 mm) |
| Bowl Opening | 16½ in. × 18½ in. (419.1 × 469.9 mm) |
| Gate Opening | 6 in. (152.4 mm) |
| Base Bolt Slot Width | 1½ in. (38.1 mm) |
| Slot Centers | 12¾–16¼ in. (323.9–412.8 mm) |
| Weight | 408 lbs (185.1 kg) |
The Model C spider uses a machined bowl taper that matches the slip bodies. A control valve actuates a pneumatic or hydraulic cylinder; the cylinder moves the slip assembly through lift arms, crank shafts and links. When the cylinder extends, the inserts engage the tubing; when it retracts, the slips lift clear of the bowl. The Model C base is optimized for the 165,000 lbs design load.
Replacing an existing unit with a Model C? Check these points before ordering:
The Model C tubing spider is used in workover and well-service operations with:
For Model C replacement parts, see Model C & CHD Tubing Spider Parts.
The Model C tubing spider is used to hold the load of the tubing string during workover and well-service operations. It is suitable for:
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure if the Model C provides enough load capacity for your operation? Tell us your maximum tubing OD, expected string weight, and actuation supply (pneumatic or hydraulic). Our engineers will confirm the correct model, slip body and insert set before you order.
High-turnover replacement parts for the Model C spider include:
| Part No. | Part Name | Qty |
|---|---|---|
| 65116 | Bolt (for Slips) | 4 |
| 65122 | Shaft Retaining Clip | 4 |
| 65124 | Crank Shaft Bushing | 4 |
| 65125 | Link Bushing | 2 |
| 65136 | Safety Bolt | 2 |
| 65140K2 / 651401 | Pneumatic Cylinder Repair Kit / Cylinder | 1 |
| 65601 | Retainer Pin | 12 |
For the complete parts list including slip bodies and insert sets, see Model C & CHD Tubing Spider Parts.
Q: What is the load rating of the Model C tubing spider?
A: The Model C tubing spider is rated at 165,000 lbs (74,843 kg).
Q: What tubing size range does the Model C spider handle?
A: The Model C spider handles 1.315 to 5½ in. (33.4 to 139.7 mm) tubing with interchangeable slip bodies and insert sets.
Q: When should I choose the CHD over the Model C?
A: Choose the CHD model if your expected tubing string load approaches or exceeds 165,000 lbs, or if you need the additional 250,000 lbs capacity margin.
Q: How do I replace the slip inserts on a Model C spider?
A: Hold the slip bodies raised, remove the four cotter pins and retainer pins, slide the inserts out of the dovetail groove, clean and grease the body, install a full new insert set, and reinstall the retainer pins and cotter pins.
Q: What is the typical lead time for a Model C spider or replacement parts?
A: Lead time depends on configuration and stock status. For urgent downtime or year-end shutdown planning, contact HYRIG with your model, part numbers and quantity for a confirmed delivery estimate.
Q: Is the Model C spider a lifting product that requires special certification?
A: The Model C spider is a load-holding lifting tool rated at 165,000 lbs. Verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
For Model C tubing spider selection and spare parts, contact HYRIG: info@hyrig.com
Please include: model (C or CHD), tubing OD range, actuation type (pneumatic/hydraulic), and required part numbers for the fastest quote.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.