Model C & CHD Tubing Spider Parts | Slips & Inserts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply replacement parts for Model C and CHD tubing spiders. Find slip bodies, insert sets, bushings, retainer pins, and cylinder repair kits for your specific workover spider model.
Conatct For Details
DetailReview(0)Additional

Model C & CHD Tubing Spider Parts

HYRIG can supply replacement parts for Model C and CHD tubing spiders. Keep your workover operations running with drop-in replacement slip bodies, insert sets, bushings, and cylinder repair kits.

Key Facts

ComponentAvailability
Slip Bodies65622-100, 65623-100, 65624-4.75, 65624-1, 65624-2
Insert Sets1.315 in. to 5-1/2 in. options available
Cylinder KitsPneumatic (65140K2) and Hydraulic (65140H1)
Wear PartsBushings, retainer pins, cotter pins, bolts
CompatibilityModel C and CHD tubing spiders

Data source: Technical data and parts list.

Compatible Host Models

These parts are compatible with the following tubing spider models:

Always verify the part number against your original equipment manual or contact HYRIG engineers for confirmation.

Slip Bodies and Insert Sets

Select the correct slip body and insert set for your tubing OD.

Part No.QtyDescription
65622-10011.315 to 3-1/2 in. Slip Body Assembly
65652-1.31511.315 in. Slip Insert Set
65652-1.66011.660 in. Slip Insert Set
65652-1.90011.900 in. Slip Insert Set
65652-2.06012.060 in. Slip Insert Set
65652-112-3/8 in. Slip Insert Set
65652-212-7/8 in. Slip Insert Set
65652-3.12513-1/8 in. Slip Insert Set
65652-313-1/2 in. Slip Insert Set
65623-10013-1/2 to 4-1/2 in. Slip Body Assembly
65653-113-1/2 in. Slip Insert Set
65653-214 in. Slip Insert Set
65653-314-1/2 in. Slip Insert Set
65624-4.7514-3/4 in. Solid Slip Body Assembly
65624-115 in. Solid Slip Body Assembly
65624-215-1/2 in. Solid Slip Body Assembly

High-Turnover Wear Components

Part No.QtyDescription
651244Crank Shaft Bushing
651252Link Bushing
6560112Retainer Pin
992012-4412Cotter Pin
992073-0112Grease Fitting
651164Bolt (For Slips)
992089-134Nut
651224Shaft Retaining Clip

Cylinder and Repair Kits

Part No.QtyDescription
6514011Pneumatic Cylinder
65140K21Pneumatic Cylinder Repair Kit w/ O-rings and Internal Retainer Rings
65140H11Hydraulic Cylinder (Not field repairable)

Structure / Working Principle

Maintaining the slip bodies, inserts, and bushings ensures the spider can reliably grip and release the tubing string. The inserts engage the tubing when the cylinder extends; worn inserts or bushings can cause slippage or improper alignment.

Cross-Reference & Replacement

Replacing worn parts? Check these points before ordering:

  1. Tubing OD: Match the insert set to your exact tubing diameter (e.g., 2-7/8 in. uses 65652-2).
  2. Slip Body Range: Ensure the slip body assembly matches your tubing range (e.g., 65622-100 for 1.315 to 3-1/2 in.).
  3. Actuation Type: Choose the correct cylinder or repair kit for your pneumatic (65140K2) or hydraulic (65140H1) system.
  4. Wear Limits: Inspect bushings and inserts regularly. Replace inserts as a full set.

Applications

These replacement parts are used to maintain Model C and CHD tubing spiders in workover and well-service operations. Suitable for:

  • Routine maintenance and wear replacement
  • Restoring grip on 1.315 to 5-1/2 in. tubing
  • Cylinder rebuilds for pneumatic or hydraulic systems

Disclaimer: HYRIG supplies lifting equipment parts for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.

Selection Support

Not sure which slip body or insert set matches your tubing? Provide your tubing OD, spider model (C or CHD), and required part numbers. Our engineers will verify the correct components before you order.

Frequently Asked Questions

Q: How do I know which slip insert set to order?
A: Match the insert set part number to your exact tubing OD. For example, 2-7/8 in. tubing uses insert set 65652-2.

Q: Can I replace just one insert, or do I need a full set?
A: Always replace inserts in a full set to ensure even gripping and proper alignment.

Q: Are the pneumatic and hydraulic cylinder repair kits interchangeable?
A: No. The pneumatic system uses 65140K2, while the hydraulic cylinder (65140H1) is not field repairable and must be replaced as a unit.

Q: What is the typical lead time for replacement parts?
A: Lead time depends on stock status. For urgent downtime, contact HYRIG with your part numbers and quantity for a confirmed delivery estimate.

Q: How do I verify if a part fits my older Model C spider?
A: Compare the part number against your original manual or contact HYRIG with your spider serial number and required part number.

Contact

For Model C and CHD tubing spider parts, contact HYRIG: info@hyrig.com

Please include: model (C or CHD), required part numbers, and quantity for the fastest quote.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit