HYRIG can supply the Model C and CHD tubing spider range and its spare parts. The Model C is rated at 165,000 lbs (74,843 kg) and the CHD is rated at 250,000 lbs (113,398 kg). Both models handle 1.315 to 5½ in. (33.4 to 139.7 mm) tubing for workover and well-service operations.
| Parameter | Model C | Model CHD |
|---|---|---|
| Load Rating | 165,000 lbs (74,843 kg) | 250,000 lbs (113,398 kg) |
| Size Range | 1.315–5½ in. | 1.315–5½ in. |
| Actuation | Hydraulic / Pneumatic | Hydraulic / Pneumatic |
| Weight | 408 lbs (185.1 kg) | 457 lbs (207.3 kg) |
| Base Height | 16½ in. (419.1 mm) | 18 in. (457.2 mm) |
| Bowl Opening | 16½ × 18½ in. | 17½ × 18 in. |
| Gate Opening | 6 in. (152.4 mm) | 6½ in. (165.1 mm) |
| Material | Heat-treated alloy steel | Heat-treated alloy steel |
Data source: Technical data table and parts list.
| Parameter | Model C | Model CHD |
|---|---|---|
| Load Rating | 165,000 lbs (74,843 kg) | 250,000 lbs (113,398 kg) |
| Size Range | 1.315–5½ in. | 1.315–5½ in. |
| Hydraulic Pressure | 300–500 PSI | 300–500 PSI |
| Pneumatic Pressure | 90–120 PSI | 90–120 PSI |
| Weight | 408 lbs (185.1 kg) | 457 lbs (207.3 kg) |
| Base Height | 16½ in. (419.1 mm) | 18 in. (457.2 mm) |
| Bowl Opening | 16½ × 18½ in. | 17½ × 18 in. |
| Gate Opening | 6 in. (152.4 mm) | 6½ in. (165.1 mm) |
Explore individual models: Model C Tubing Spider and CHD Tubing Spider.
| Dimension | Model C | Model CHD |
|---|---|---|
| Base Height | 16½ in. (419.1 mm) | 18 in. (457.2 mm) |
| Bowl Opening | 16½ × 18½ in. | 17½ × 18 in. |
| Gate Opening | 6 in. (152.4 mm) | 6½ in. (165.1 mm) |
| Base Bolt Slot Width | 1½ in. (38.1 mm) | 1½ in. (38.1 mm) |
| Slot Centers | 12¾–16¼ in. | 12¾–16¼ in. |
Both models use a machined bowl taper that matches the slip bodies. A control valve actuates a pneumatic or hydraulic cylinder; the cylinder moves the slip assembly through lift arms, crank shafts and links. When the cylinder extends, the inserts engage the tubing; when it retracts, the slips lift clear of the bowl. The CHD base is thicker than the Model C base to carry the higher 250,000 lbs design load.
Upgrading from a Model C to a CHD, or verifying an existing unit? Check these points:
These tubing spiders are used in workover and well-service operations with:
For replacement parts, see Model C & CHD Tubing Spider Parts.
These tubing spiders are used to hold the load of the tubing string during workover and well-service operations. They are suitable for:
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Which model fits your operation? Tell us your maximum tubing OD, expected string weight, and actuation supply (pneumatic or hydraulic). Our engineers will confirm the correct model, slip body and insert set before you order.
Both models share high-turnover replacement parts, including:
| Part No. | Part Name | Qty |
|---|---|---|
| 65116 | Bolt (for Slips) | 4 |
| 65122 | Shaft Retaining Clip | 4 |
| 65124 | Crank Shaft Bushing | 4 |
| 65125 | Link Bushing | 2 |
| 65136 | Safety Bolt | 2 |
| 65601 | Retainer Pin | 12 |
For the complete parts list including slip bodies and insert sets, see Model C & CHD Tubing Spider Parts.
Q: What is the main difference between the Model C and CHD tubing spiders?
A: The CHD is rated at 250,000 lbs and has a thicker base, while the Model C is rated at 165,000 lbs with a standard base.
Q: Do both models handle the same tubing size range?
A: Yes, both the Model C and CHD handle 1.315 to 5½ in. (33.4 to 139.7 mm) tubing using interchangeable slip bodies and insert sets.
Q: What actuation options are available for these spiders?
A: Both models are available in hydraulic (300–500 PSI) and pneumatic (90–120 PSI) configurations.
Q: How do I choose between the Model C and CHD?
A: Choose the CHD if your tubing string loads approach or exceed 165,000 lbs, or if you need the additional 250,000 lbs capacity margin. Choose the Model C for lighter loads up to 165,000 lbs.
Q: Are replacement parts shared between the two models?
A: Many high-turnover parts such as bushings, bolts, and retainer pins are shared, but the cylinders differ. Verify the exact part number before ordering.
Q: Is this equipment subject to lifting regulations?
A: Yes, these are load-holding lifting tools rated at 165,000 to 250,000 lbs. Verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
For Model C or CHD tubing spider selection and spare parts, contact HYRIG: info@hyrig.com
Please include: model (C or CHD), tubing OD range, actuation type (pneumatic/hydraulic), and required part numbers for the fastest quote.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.