| Attribute | Value |
|---|---|
| Product Type | Air-actuated, single-plate pneumatic disc clutch |
| Compatible Series | EATON AIRFLEX PDC configurations |
| Plate Configuration | 1 plate |
| Dynamic Torque | 65,000 lb-in / 7,345 Nm @ 100 psi |
| Maximum Speed | 1,750 RPM |
| Element Part No. | 146597A |
| Typical Host | High-speed drawworks, pumps |
| Replacement Compatibility | Form-fit-function replacement; verify shaft bore and adapter bolt pattern |
> Data source: Technical data table.
| Parameter | Value |
|---|---|
| Size / Diameter | 18 in |
| Plate Count | 1 |
| Dynamic Torque @ 100 psi | 65,000 lb-in (7,345 Nm) |
| Maximum Speed | 1,750 RPM |
| Air Actuation | Air tube type |
| Element Part No. | 146597A |
| Dimension Item | Reference / Action |
|---|---|
| Bore Range | Confirm existing shaft diameter and keyway |
| Driving Ring Bolt Pattern | Measure adapter bolt circle and hole diameter |
| Overall Diameter | 18 in nominal; confirm clearance |
The 118PDC uses air pressure to inflate a tube, pressing the friction disc against the driving ring. The disc design provides lower inertia compared to drum-style clutches, allowing faster engagement and less heat buildup in high-speed applications.
Replacing an Airflex 118PDC? Here is what to verify before ordering:
Important boundary: This page covers the Eaton 118PDC pneumatic disc clutch. It is not the WPT Power Grip 118 drum clutch or the 118WCB water-cooled brake.
The 118PDC is commonly used on high-speed drawworks and auxiliary drives.
Internal links:
Suitable for high-speed drilling rig drawworks and auxiliary drives where low inertia and fast engagement are required.
Not intended for: continuous slip braking duty (use a WCB water-cooled brake).
Not sure whether the 118PDC or 218PDC is the correct replacement? Send HYRIG the existing nameplate photo, shaft diameter, and adapter bolt pattern.
Q: Is this the same as a WPT Power Grip 118?
No. The Eaton 118PDC is a disc clutch; the WPT Power Grip 118 is a drum clutch. They are not interchangeable.
Q: What is the part number for the replacement element?
The reference element part number for the 118PDC is 146597A; confirm against your original drawing.
Q: What is the lead time?
Standard lead time is quoted per order based on configuration; confirm with HYRIG at inquiry.
For 118PDC clutch selection and replacement parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.