Eaton 218PDC Clutch | Airflex Compatible Replacement

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply a compatible replacement for the EATON AIRFLEX 218PDC pneumatic disc clutch. The 218PDC is a two-plate, 18-inch air-actuated disc clutch providing higher torque for high-speed drilling applications. Eaton Airflex® is a registered trademark of Eaton Corporation. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by Eaton Corporation.
Conatct For Details
DetailReview(0)Additional

Key Facts

AttributeValue
Product TypeAir-actuated, 2-plate pneumatic disc clutch
Compatible SeriesEATON AIRFLEX PDC configurations
Plate Configuration2 plates
Dynamic Torque130,000 lb-in / 14,690 Nm @ 100 psi
Maximum Speed1,750 RPM
Element Part No.146598A
Typical HostHigh-speed drawworks
Replacement CompatibilityForm-fit-function replacement; verify shaft bore and adapter bolt pattern

> Data source: Technical data table.

218PDC Specifications

ParameterValue
Size / Diameter18 in
Plate Count2
Dynamic Torque @ 100 psi130,000 lb-in (14,690 Nm)
Maximum Speed1,750 RPM
Element Part No.146598A

Dimensions

Dimension ItemReference / Action
Bore RangeConfirm existing shaft diameter and keyway
Driving Ring Bolt PatternMeasure adapter bolt circle
Overall Diameter18 in nominal

Structure / Working Principle

The 218PDC uses two friction discs for higher torque capacity while maintaining low inertia for fast engagement.

Cross-Reference & Replacement

Verify:

  1. Shaft and keyway — measure existing shaft.
  2. Adapter bolt pattern.
  3. Plate count — 218PDC is 2-plate. Do not substitute with 118PDC or 318PDC without confirming clearance and air supply.

Compatible Host Models

High-speed drawworks.

Internal links:

Applications

High-speed drilling rig drawworks.

Not intended for: continuous slip braking.

Selection Support

Send HYRIG the nameplate photo, shaft dimensions, and adapter details.

Frequently Asked Questions

Q: What is the difference between 118PDC and 218PDC?
The 118PDC has 1 plate; the 218PDC has 2 plates, providing higher torque.

Q: What is the part number for the replacement element?
The reference element part number is 146598A; confirm against your drawing.

Q: What is the lead time?
Standard lead time is quoted per order.

Contact

Contact HYRIG: info@hyrig.com

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit