API 610 Catalytic Slurry Oil Pump – China Manufacturer | BB2/BB3/BB4 for FCC Bottom Slurry & Catalyst Fines Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 610 catalytic slurry oil pump series, manufactured in China. Includes BB2, BB3, BB4 models. Flow range 35–1700 m³/h, head up to 2500 m, temperature up to 400°C, pressure up to 25.0 MPa. Designed for handling FCC (fluid catalytic cracking) catalytic slurry oil containing abrasive catalyst fines (1‑150 µm) in refineries, as well as other high‑temperature, high‑solids hydrocarbon streams. Features heavy‑duty construction: chrome‑molybdenum steel (WC6/WC9) with hardened impellers and wear rings (nitrided, stellite, or HVOF ceramic coating), API 682 Plan 62 steam quench to prevent coking at seal faces, double mechanical seals for emissions control, and forced oil lubrication with cooling. BB4 radial split barrel design provides safe containment at ultra‑high pressures. Optimized for extreme erosion, high temperature, and long run life. API 610 compliant, 30-year design life, NACE optional for sour service.
Conatct For Details
DetailReview(0)Additional

Product Overview

Are you searching for a China-made API 610 pump suitable for catalytic slurry oil applications?
This series includes BB2, BB3, BB4 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, engineered for catalytic slurry oil – the high‑temperature, high‑viscosity bottom stream from an FCC (fluid catalytic cracking) unit, containing typically 1‑10 wt% of hard, abrasive catalyst particles (zeolite or alumina, particle size 1‑150 µm). This service demands exceptional erosion resistance, high temperature capability (up to 400°C), high pressure handling, and specialized sealing to prevent coking. Other applications include clarified slurry oil (CSO), decant oil, and similar streams containing erosive particulates.

With heavy‑duty metallurgy, hardened hydraulic components, advanced steam‑quenched seals, and robust bearing systems, our pumps deliver unparalleled reliability, long service life (≥30 years), and low total cost of ownership in the most demanding catalytic slurry services.

Core Advantages

  • Full API 610 Compliance – Designed and manufactured per API 610 latest edition for all BB2, BB3, and BB4 constructions. Passed strict dynamic balancing, hydrostatic, and high‑temperature performance testing. Design life ≥30 years, continuous trouble‑free operation ≥3 years.

  • High Temperature & Erosion-Resistant Alloys – Wetted parts in chrome‑molybdenum steel (ASTM A217 WC6/WC9) for service up to 400°C. Impellers and wear rings are nitrided (≥55 HRC) or stellite‑hardfaced (60+ HRC). Optional HVOF tungsten carbide coating provides ultimate resistance against very sharp, hard catalyst fines. BB4 heavy‑wall barrel casing safely contains high‑pressure abrasive slurry.

  • Solids-Optimized Hydraulics – Increased internal clearances (typically 150% of API 610 standard), polished flow surfaces, swept‑back or open‑style impeller vanes to reduce particle impact velocity and minimize accumulation. Reduced impeller tip speeds extend component life.

  • Anti‑Coking Sealing – API 682 Plan 62 with low‑pressure steam quench (0.5‑2 bar) is standard. Live steam sweeps the seal chamber, preventing the deposition of coke and degraded oil on seal faces. For emission‑sensitive areas, Plan 53B double mechanical seals with cooled barrier fluid are available (often combined with Plan 62). High‑temperature packing with lantern ring and steam injection is an alternative.

  • Heavy‑Duty Bearing System – Large bore high‑capacity rolling element bearings or tilting‑pad journal bearings with forced oil mist or circulating lubrication. Water‑cooled bearing housings maintain temperature below 100°C. Vibration and temperature probes per API 670.

  • Full Pressure Range – BB2 (single‑stage radial split, ≤5 MPa, for moderate slurry transfer); BB3 (multi‑stage axial split, ≤11 MPa, for high‑head applications); BB4 (radially split barrel, ≤25 MPa, up to 30 MPa optional, for ultra‑high pressure feed to downstream units like slurry hydrocrackers, cokers, or injection wells).

Main Models & Applications

BB2 (Single-stage, Double-suction, Radial Split)

Features: Horizontal single‑stage, double‑suction, radial split casing, centerline mounting – balanced axial thrust reduces bearing loads. Rotating element accessible without disturbing piping (radial split design).
Catalytic slurry oil applications: Transfer of FCC slurry from settling drum to storage or decant drums; low‑ to medium‑pressure slurry circulation within the FCC main column (≤250 m head); loading of slurry oil to tank cars.
Commonly searched as: single stage FCC catalytic slurry pump / BB2 catalyst fines transfer pump.

BB3 (Multi-stage, Axial Split)

Features: Horizontal multi‑stage, axially split (centerline supported) – up to 8 stages, head up to 1000 m, working pressure up to 11.0 MPa. Built‑in axial thrust balancing device (balance drum or piston rings).
Catalytic slurry oil applications: High‑pressure slurry oil feed to delayed coker fractionators (up to 11 MPa); long‑distance pipeline transport of catalytic slurry containing fines; boosting to slurry hydrotreating or mild hydrocracking units; high‑head FCC bottoms recycle.
Searches matched: multi‑stage high pressure catalytic slurry pump / BB3 FCC slurry injection.

BB4 (Multi-stage, Radially Split Barrel Pump)

Features: Horizontal multi‑stage, radially split barrel construction – inner stage casing housed in a forged outer barrel, designed for extremely high pressures up to 25 MPa (3600 psi) and up to 2500 m head (12 stages). Fully safe containment of high temperature, abrasive slurry. Rotating assembly pulls out horizontally. Nozzle orientation customizable.
Catalytic slurry oil applications: Ultra‑high pressure feed to residue slurry hydrocracking (e.g., Uniflex, LC‑Fining, H-Oil) using FCC bottoms; high pressure injection into deep disposal wells; high pressure, high temperature, high solids service for ethylene tar or heavy pitch; feed to delayed coker at very high pressure.
Searches matched: barrel pump for catalytic slurry / BB4 FCC bottoms high pressure pump.

Performance Parameters Table

ModelFlow (m³/h)Head (m)Max Temp (°C)Working Pressure (MPa)Typical Stages
BB284–170065–250400≤5.0 (higher on request)1
BB335–2000140–1000400≤11.02‑8
BB435–1700*up to 2500400≤25.0 (30 MPa optional)4‑12

*BB4 flow up to 1700 m³/h depending on size.

Material Configuration (Catalytic Slurry Oil Service)

ComponentStandard MaterialWear Protection / CoatingNotes
Casing (BB2/BB3)Cr-Mo steel (WC6/WC9) ASTM A217None (smooth)H₂S resistant
Outer barrel (BB4)Forged Cr-Mo steel (F22 or similar)–High pressure containment
Inner stage casing (BB4)Cr-Mo steel (WC9)–Replaceable
ImpellerCr-Mo steel + nitrided (≥55 HRC)Optional stellite overlay (face & vanes)For catalyst erosion
Wear ringsStellite 6 or 12 (hardfaced)Match with hardened counter ringReplaceable / adjustable
ShaftAISI 4140/4340, high temper (32‑35 HRC)Coated sleeve (Cr₂O₃ or WC)Protects against process fluid
BoltingB7M or L7M (NACE)–For sour catalytic slurry
Seal (API 682)Plan 62 steam quench (single mechanical)Metal bellows, SiC vs SiC facesSteam flows to quench area
Alternative sealPlan 53B dual + Plan 62 (for zero emissions)Cooled barrier fluidHigh pressure / toxic service
BearingHigh‑load rolling or tilting‑pad; forced lubeWater cooling jacketOil temperature ≤75°C
GasketsSpiral wound, graphite filled, 316L–High temperature ≤450°C
  • For catalytic slurry oil with H₂S (sour slurry), all materials NACE MR0175 / ISO 15156 compliant with hardness ≤235 HB and appropriate heat treatment.

  • Optional: HVOF tungsten carbide (WC-CoCr) coating on all wetted surfaces for extreme catalyst erosion (particle hardness >800 HV).

FAQ – Frequently Asked Questions for Catalytic Slurry Oil API 610 Pumps

Q: Which API 610 pump model is best for ultra‑high pressure feed of FCC slurry to a slurry hydrocracker (20‑25 MPa)?
A: BB4 radial split barrel pump is the correct choice. Use HVOF‑coated impellers, stellite wear rings, and API 682 Plan 53B + Plan 62 sealing to handle both high pressure and coking.

Q: Which model is recommended for moderate pressure (3‑5 MPa) catalytic slurry transfer within the FCC unit?
A: BB2 single‑stage radial split pump provides robust performance, easy maintenance, and double‑suction to balance axial thrust. Nitrided impellers with increased clearances are standard.

Q: How do you prevent catalyst fines from eroding impellers and casing?
A: We use nitrided Cr‑Mo steel (55‑60 HRC), stellite‑hardfaced wear rings, and optional HVOF coating. We also reduce impeller tip speed, increase internal clearances (API 610 plus 50%), and avoid sharp flow path corners.

Q: What sealing arrangement prevents coking and solids accumulation at the seal face?
A: API 682 Plan 62 with continuous low‑pressure steam quench is standard. The steam prevents oil degradation and sweeps away any catalyst particles that might otherwise settle on the seal faces. For zero emission, Plan 53B is added.

Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer fully certified to API 610, with extensive references in FCC service for refineries worldwide.

Q: What is the design life and expected maintenance interval?
A: Pump casing design life ≥30 years. Impellers and wear rings typically last 2‑5 years depending on catalyst concentration and particle hardness. All wear parts are designed for field replacement without removing the pump from piping.

Q: Can the pump handle up to 8% catalyst fines (mean 70 µm, alumina)?
A: Yes, with HVOF coating on all wetted surfaces, increased clearances, and hardened wear rings. We recommend discussing your specific solids concentration and particle analysis for optimal design.

Why Choose Our API 610 Catalytic Slurry Oil Pump Series?

  • Ultimate erosion resistance – Nitrided Cr‑Mo, stellite, HVOF carbide coatings.

  • High temperature (400°C) and high pressure (25 MPa) capability, especially BB4 barrel.

  • Coking prevention – API 682 steam quench (Plan 62) standard.

  • Heavy‑duty bearings with oil lube and cooling – 24/7 refinery operation.

  • Complete model range – BB2, BB3, BB4 covers all head/pressure requirements.

  • China competitive pricing – Premium materials at accessible cost.

Contact Us

For inquiries, model selection, or technical support, please provide: catalytic slurry oil flow (m³/h), differential head (m), temperature (°C), catalyst fines concentration (wt% and particle size distribution, PSD), viscosity at pump inlet, NPSH available, presence of H₂S (sour or sweet), and required sealing arrangement. Our FCC slurry specialists will recommend the optimal API 610 catalytic slurry oil pump (BB2/BB3/BB4) with tailored wear protection and seal configuration.

Email: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit