API 610 Slurry Oil Pump – China Manufacturer | BB2/BB3/BB4 for FCC Slurry & Catalyst Solids Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 610 slurry oil pump series, manufactured in China. Includes BB2, BB3, BB4 models. Flow range 35–1700 m³/h, head up to 2500 m, temperature up to 400°C, pressure up to 25.0 MPa. Designed for handling FCC (fluid catalytic cracking) slurry oil containing abrasive catalyst fines (1‑100 µm) in refineries, as well as other high‑temperature, high‑solids hydrocarbon streams (coker bottoms, tars). Features heavy‑dury construction: chrome‑molybdenum steel (WC6/WC9) with hardened impellers and wear rings (stellite or ceramic coating), API 682 Plan 62 steam quench to prevent coking at seal faces, double mechanical seals for emissions control, and cooling on bearings. BB4 radial split barrel design provides safe containment at ultra‑high pressures. Optimized for high temperature, erosion resistance, and long run life. API 610 compliant, 30-year design life, NACE optional for sour service.
Conatct For Details
DetailReview(0)Additional

Product Overview

Are you searching for a China-made API 610 pump suitable for slurry oil applications?
This series includes BB2, BB3, BB4 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, engineered for slurry oil service – specifically the heavy, high‑temperature hydrocarbon stream from the FCC (fluid catalytic cracking) unit bottom, containing 1‑10 wt% of hard catalyst fines (zeolite particles, 1‑150 µm). These fines are highly abrasive and can quickly destroy standard pumps. Other applications include coker bottoms, decant oil, and any high‑solids, high‑viscosity refinery residue requiring erosion and heat resistance.

With high temperature capability (up to 400°C), excellent resistance to catalyst erosion, high pressure designs (up to 25 MPa), and advanced sealing to prevent coking, our pumps deliver exceptional reliability, long service life (≥30 years), and low total cost of ownership in the most challenging FCC slurry service.

Core Advantages

  • Full API 610 Compliance – Designed and manufactured per API 610 latest edition for BB2, BB3, BB4 constructions. Passed strict dynamic balancing, hydrostatic, and high‑temperature testing. Design life ≥30 years, continuous trouble‑free operation ≥3 years.

  • High Temperature & Erosion-Resistant Metallurgy – Wetted parts in Cr-Mo steel (ASTM A217 WC6/WC9) for up to 400°C. Impellers and wear rings are nitrided (hardness >55 HRC) or stellite coated. Optional ceramic coatings (HVOF tungsten carbide) for extreme erosion. Heavy wall casing and BB4 barrel design safely contain high pressure abrasive slurry.

  • Optimized Hydraulics for Solids – Large internal clearances (150% of standard API 610), polished flow passages, and swept vane impellers reduce catalyst accumulation and erosion. Reduced tip speeds lower particle impact velocity.

  • Advanced Sealing for Coking Prevention – API 682 Plan 62 (low‑pressure steam quench) is standard for hot slurry oil to prevent coke formation at the seal faces. For stricter emissions, double mechanical seal Plan 53B with barrier fluid cooling is available. High‑temperature packing with steam quenching can be supplied as alternative.

  • Heavy Duty Bearings – High load capacity tilting‑pad or large rolling bearings with forced oil lubrication and cooling water jackets, designed for continuous high temperature operation. Vibration and temperature monitoring per API 670.

  • Full Model Coverage – BB2 (single‑stage radial split, up to 5 MPa for medium‑pressure slurry transfer), BB3 (multi‑stage axial split, up to 11 MPa for high‑head applications), BB4 (radially split barrel, up to 25 MPa for ultra‑high pressure feed to downstream units). One‑stop solution from moderate to extreme slurry duties.

Main Models & Applications

BB2 (Single-stage, Double-suction, Radial Split)

Features: Horizontal single‑stage, double‑suction, radial split, centerline mounting – balanced axial thrust reduces wear on bearings; suitable for moderate high pressure up to 5.0 MPa (higher with heavy‑wall casing). Rotating element can be removed without disturbing piping.
Slurry oil applications: FCC slurry transfer from slurry settler to storage tanks; feed to decant oil drums; low‑ to medium‑pressure recycling within FCC unit; general slurry oil circulation with head ≤250 m.
Commonly searched as: single stage FCC slurry pump / BB2 catalyst fines pump.

BB3 (Multi-stage, Axial Split)

Features: Horizontal multi‑stage, axially split (centerline supported) – up to 8 stages, head up to 1000 m, working pressure up to 11.0 MPa. Axial thrust balancing piston/disc for extended life.
Slurry oil applications: High‑pressure slurry oil feed to delayed coker fractionators (up to 11 MPa); long‑distance slurry pipeline transport; boosting to slurry hydrotreating units; high‑head FCC bottoms recycling.
Searches matched: multi‑stage high pressure slurry pump / BB3 FCC slurry re‑injection.

BB4 (Multi-stage, Radially Split Barrel Pump)

Features: Horizontal multi‑stage, radially split barrel (inner stage casing inside outer barrel) – extremely high pressure up to 25 MPa, head up to 2500 m (12 stages). Safe containment of abrasive hot slurry. Full nozzle orientation flexibility.
Slurry oil applications: Ultra‑high pressure feed to slurry hydrocracking (e.g., Uniflex, LC‑Fining) from FCC bottoms; injection into deep‑well disposal zones; high pressure, high temperature, high solids service requiring maximum safety; ethylene tar / residue with fines.
Searches matched: barrel pump for FCC slurry / BB4 high pressure catalyst fines pump.

Performance Parameters Table

ModelFlow (m³/h)Head (m)Max Temp (°C)Working Pressure (MPa)Typical Stages
BB284–170065–250400≤5.0 (higher on request)1
BB335–2000140–1000400≤11.02‑8
BB435–1700*up to 2500400≤25.0 (30 MPa optional)4‑12

*BB4 flow up to 1700 m³/h depending on size.

Material Configuration (Slurry Oil Service)

ComponentStandard MaterialWear ProtectionNotes
CasingCr-Mo steel (WC6/WC9) – ASTM A217None (smooth finish)H₂S resistant
ImpellerCr-Mo steel + nitriding (min 55 HRC)Optional stellite overlay (face)For catalyst erosion
Wear ringsStellite 6 or stellite 12 (hardfacing)Hard vs hardReplaceable
ShaftAISI 4140/4340, high temper (32‑35 HRC)Sleeve with Cr2O3 coatingFatigue resistant
BoltingB7M or L7M (NACE)–For sour service
SealAPI 682 Plan 62 (steam quench), or Plan 53B (dual)Metal bellows, SiC facesSteam prevents coke
BearingHigh‑load rolling or tilting‑pad; forced lubeWater cooling jacketTemperature ≤100°C
GasketsSpiral wound, graphite filled, 316L–High temperature
  • For slurry oil containing H₂S (sour service), all materials NACE MR0175 / ISO 15156 compliant (hardness ≤235 HB for Cr‑Mo).

  • Optional: HVOF tungsten carbide coating on all wetted surfaces for extreme catalyst erosion (particle hardness >8 Mohs).

FAQ – Frequently Asked Questions for Slurry Oil API 610 Pumps

Q: Which API 610 pump model is best for high pressure FCC slurry hydrotreater feed (20‑25 MPa)?
A: BB4 radial split barrel pump is designed for this extreme duty. Use stellite or ceramic coated impellers, plus API 682 Plan 53B + Plan 62 to handle both high pressure and coking.

Q: Which model is recommended for moderate pressure (3‑4 MPa) slurry oil transfer within the FCC unit?
A: BB2 single‑stage radial split pump provides good reliability, double‑suction to handle axial thrust, and easy maintenance without removing piping.

Q: How do you prevent catalyst fines from eroding the pump?
A: We use nitrided Cr‑Mo impellers (55‑60 HRC), stellite‑coated wear rings, and optional HVOF carbide coating. We also increase internal clearances (150% of standard) and reduce impeller tip speed.

Q: What sealing arrangement prevents coking of slurry oil at the seal faces?
A: API 682 Plan 62 with low‑pressure steam quench (about 10‑50 kPa) is standard. The steam sweeps the seal chamber, preventing degradation product accumulation. For high pressure services, Plan 53B with cooled barrier fluid is combined with Plan 62.

Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive experience in FCC slurry pumps for major refineries.

Q: What is the design life and expected wear part life?
A: Pump design life ≥30 years. Impeller and wear ring life typically 2‑5 years depending on catalyst load (wt%), particle size, and velocity. Replaceable wear parts are designed for quick change.

Q: Can the pump handle up to 5% catalyst fines (mean 50 µm)?
A: Yes, with hardened components and proper clearances. We recommend HVOF coating for >3% solids.

Why Choose Our API 610 Slurry Oil Pump Series?

  • Extreme erosion resistance – Nitrided Cr‑Mo, stellite, or HVOF carbide coatings.

  • High temperature (400°C) and high pressure (25 MPa) capability with BB4 barrel.

  • Coking prevention – API 682 steam quench (Plan 62) as standard.

  • Heavy duty bearings and cooling – for 24/7 refinery continuous run.

  • Full model range – BB2, BB3, BB4 to match any head/pressure requirement.

  • China competitive pricing – premium materials at affordable cost.

Contact Us

For inquiries, model selection, or technical support, please provide: slurry oil flow (m³/h), differential head (m), temperature (°C), catalyst fines concentration (wt% and particle size distribution), viscosity at pump inlet, NPSH available, presence of H₂S, and required sealing plan. Our FCC slurry specialists will recommend the optimal API 610 pump (BB2, BB3, or BB4) with appropriate wear protection and seal configuration.

Email: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit