Are you searching for a China-made API 610 pump suitable for residue oil applications?
This series includes BB2, BB3, BB4 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, engineered for residue oil service (atmospheric residue AR, vacuum residue VR, heavy fuel oil, cracked residue from FCC or coker, visbreaker bottoms, and other high‑boiling, high‑viscosity hydrocarbon fractions often containing catalyst fines, coke particles, or other solids). Typical applications include: refinery residue transfer from crude or vacuum columns, feed to coker, visbreaker, or resid hydrotreating (RDS), heavy fuel oil forwarding, loading to tankers, and long‑distance residue pipelines.
With high temperature capability (up to 400°C), high viscosity handling (up to 2000 cSt), solids erosion resistance, and high pressure designs, our pumps provide unmatched reliability, long service life (≥30 years), and low maintenance in the most severe residue service.
Full API 610 Compliance – Designed and manufactured per API 610 latest edition (including BB2, BB3, BB4 construction). Passed strict dynamic balancing, hydrostatic, and high temperature testing. Design life ≥30 years, continuous trouble‑free operation ≥3 years.
High Temperature & Wear Resistant Materials – Wetted parts in Cr-Mo steel (ASTM A217 WC6/WC9) for up to 400°C. Hardened impellers and wear rings (nitrided or stellite coated) for erosion resistance against catalyst fines/coke. Heavy wall casing and BB4 barrel construction contains high pressure (up to 25 MPa) safely.
Optimized for High Viscosity – Large flow passages, reduced impeller speeds (by 30‑50%) to maintain positive suction. Heating jackets (steam or electric) on casing and stuffing box for residue oils with pour point > 30°C. API 610 compliant viscous correction curves.
Advanced Sealing – API 682 high temperature mechanical seals with Plan 62 (steam quench) to prevent coking at seal faces. For hazardous residues, double seals Plan 53B or 52. Optional: high temperature packing for specific services.
Complete Model Coverage – BB2 (single‑stage, radial split, high pressure up to 5 MPa), BB3 (multi‑stage, axially split, up to 11 MPa), BB4 (multi‑stage, radially split barrel, up to 25 MPa). One‑stop solution for low‑medium pressure to ultra‑high pressure residue transport.
Heavy Duty Bearings – Tilt‑pad or large rolling element bearings with water/oil cooling, high temperature lubrication. Vibration monitoring provisions per API 670.
Features: Horizontal single‑stage, double‑suction, radial split, centerline mounting – high rigidity, moderate high pressure capability up to 5.0 MPa (higher with extended casing), balanced axial thrust, easy access to rotating parts (no need to remove piping).
Residue oil applications: Atmospheric residue (AR) transfer from crude unit to downstream process, heavy fuel oil shipping/loading, residue feed to FCC or coker at moderate pressure, general residue circulation in refineries.
Commonly searched as: single‑stage residue oil pump / BB2 heavy fuel oil pump.
Features: Horizontal multi‑stage, axially split (centerline supported) – up to 6‑8 stages, high head up to 1000 m, working pressure up to 11.0 MPa, balanced drum or disc thrust compensation.
Residue oil applications: High pressure residue feed to visbreaker or delayed coker (up to 11 MPa), long‑distance residue pipeline transport (elevation gain), vacuum residue (VR) boosting to hydrocracker, high pressure fuel oil injection.
Searches matched: multi‑stage high head residue pump / BB3 vacuum residue delivery.
Features: Horizontal multi‑stage, radially split barrel (inner casing + outer barrel) – extremely high pressure up to 25 MPa (3600 psi), multistage (up to 12 stages), head up to 2500+ m, robust containment for heavy hydrocarbons, centerline mounting, fully accessible without disturbing suction/discharge piping.
Residue oil applications: Ultra‑high pressure feed to residue hydrotreating (RDS units – up to 20 MPa), injection into deep well disposal, long‑distance high viscosity heavy crude/residue pipelines through mountains, ethylene tar / pitch pumping.
Searches matched: barrel pump for high pressure residue / BB4 resid hydrotreater feed pump.
| Model | Flow (m³/h) | Head (m) | Max Temp (°C) | Working Pressure (MPa) | Typical Stages |
|---|---|---|---|---|---|
| BB2 | 84–1700 | 65–250 | 400 | ≤5.0 (higher on request) | 1 |
| BB3 | 35–2000 | 140–1000 | 400 | ≤11.0 | 2‑8 |
| BB4 | 35–1700* | up to 2500 | 400 | ≤25.0 (up to 30 MPa) | 4‑12 |
*BB4 flow range dependent on size; 35‑1700 m³/h typical.
| Component | Standard Material | Notes |
|---|---|---|
| Casing | Cr-Mo steel (WC6 or WC9), ASTM A217 | Up to 400°C, H₂ + H₂S resistant |
| Impeller | Cr-Mo steel + nitride (or stellite overlay on wear surfaces) | For erosion resistance |
| Wear rings | Hardened 17‑4 PH or stellite coated | Carbide on carbide for long life |
| Shaft | Alloy steel (AISI 4140/4340), high temper | 32‑35 HRC |
| Bolting | B7M or L7M (NACE) | For sour service |
| Seal | API 682 Plan 62 (steam quench), or Plan 53B (dual) | High temp metal bellows |
| Bearing | High‑load rolling or tilt‑pad with cooling | Oil mist or forced lube |
| Gaskets | Spiral wound graphite filled | High temperature |
For residues containing H₂S (sour service), all materials NACE MR0175 / ISO 15156 compliant (including hardness control for Cr‑Mo).
Additional options: steam heating jacket on casing and seal housing.
Q: Which API 610 pump model is best for very high pressure residue hydrotreater (RDS) feed (20‑25 MPa)?
A: BB4 radial split barrel pump is specifically designed for such ultra‑high pressure services, with proven reliability in resid HDT units. Use Plan 62 seal with steam quench to prevent coking.
Q: Which model is recommended for atmospheric residue transport at moderate pressure (3‑5 MPa) and large flow?
A: BB2 single‑stage radial split pump offers large flow up to 1700 m³/h, double‑suction for axial balance, and easy maintenance.
Q: How do you handle high viscosity (e.g., >500 cSt) at startup?
A: We provide steam jackets on casing and seal housing, reduced pump speed (via VFD or gear), and recirculation line preheating per API 610 guidelines. For very high viscosity, we can suggest lower NPSH designs.
Q: What sealing arrangement prevents coking at the seal faces?
A: API 682 Plan 62 with low‑pressure steam quench is standard for hot residue. The steam prevents accumulation of coke/degraded oil. For light residue or clean service, Plan 11 + Plan 62 is also used.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with many references in residue service for major refineries.
Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble‑free operation ≥3 years for residue oil service with proper maintenance (including periodic inspection of wear rings and seals).
Q: Can the pump handle up to 3 wt% catalyst solids?
A: Yes, with hardened impellers, stellite‑coated wear rings, and increased clearances. Please advise solid size and concentration for custom design.
High temperature (400°C) and high pressure (25 MPa) capability with BB4 barrel construction.
Wear resistant – hardened Cr‑Mo, stellite overlays, and large clearances for solids handling.
Viscosity optimized – heating jackets, reduced speeds, large passages.
Sealing – API 682 steam quench or double seals for fugitive emission control.
Proven refinery references – AR/VR, coker, visbreaker, resid hydrotreater feed.
China competitive pricing – premium materials at lower overall cost.
For inquiries, model selection, or technical support, please provide: residue type (AR, VR, heavy fuel oil, etc.), flow (m³/h), differential head (m), temperature, viscosity at pump inlet (cSt), solids content (wt% and particle size), NPSH available, presence of H₂S, and any special requirements (NACE, jacket, seal plan). Our refinery pump specialists will recommend the optimal API 610 residue oil pump (BB2, BB3, or BB4) with proper materials and sealing.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.