Are you searching for a China-made API 610 pump suitable for tailings slurry applications?
This series includes OH2, BB2, BB3, VS1 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, but engineered with extreme wear-resistant features for tailings slurry service (mine tailings from mineral processing – iron, copper, gold, zinc, phosphate, potash, bauxite, etc. – consisting of fine to coarse solid particles suspended in water, often with low pH or residual chemicals, requiring combined erosion and corrosion resistance). Typical applications include: concentrator to tailings storage facility (TSF) transfer, thickener underflow pumping, long-distance tailings pipelines, tailings pond return water, and mine backfill distribution.
With high reliability, extended wear life (≥30 years with replaceable liners), and robust heavy-duty construction, our pumps cover all tailings handling scenarios – from low head high flow to ultra-high head long-distance transport, from horizontal installation to vertical sump extraction.
Full API 610 Compliance (with heavy duty slurry adaptations) – Designed per API 610 latest edition with increased wall thickness, larger shaft diameters, hardened materials, and optimized hydraulic passages for solids. Passed strict dynamic balancing and hydrostatic tests. Design life ≥30 years, continuous trouble‑free operation ≥3 years.
Specialized Wear & Corrosion Materials – Wetted parts available in: High Chrome White Iron (A05 / A07, ASTM A532 Class III) for maximum abrasion resistance (58‑62 HRC), Natural Rubber lining (excellent for fine, non‑corrosive tailings), Polyurethane lining (good abrasion + mild chemical resistance), Ceramic tile lining (extreme wear, sharp particles), or Ni‑Hard 4 for moderate abrasion. Replaceable suction liners, throat bushes, and impellers.
Solids Handling Design – High efficiency impellers with thick vanes and generous flow passages (open, semi‑open, or closed with large diameter). Particle passage up to 6‑25 mm depending on model and impeller type. Optimized casing geometry reduces turbulence and sand recirculation.
Sealing Options for Abrasive Service – Gland packing with flushed lantern ring (Plan 32) is standard for most tailings slurries to handle high solids content. API 682 mechanical seals with clean external flush (Plan 32) or Plan 53B with barrier fluid are available for toxic or corrosive tailings. Expeller/dynamic seal option for zero abrasion on seal faces.
Complete Model Coverage – Four models cover flow 9–4600 m³/h, head 8–1000 m, temperature up to 100°C (higher with special materials), pressure up to 11.0 MPa. One‑stop solution for any tailings duty: cyclone feed, tailings pipeline, TSF distribution, return water, pit sump.
Flexible Installation – OH2 centerline mount for main tailings pipelines; BB2 radial split for high pressure long distance; BB3 multi‑stage for extremely high head (e.g., mountain TSF); VS1 vertical wet pit for tailings sump / thickener underflow pit extraction.
Features: Horizontal single‑stage, centerline support, end suction/top discharge – heavy‑duty shaft, oversize spherical roller bearings, extra clearances at wear rings, centerline mounting for stability.
Tailings slurry applications: Main tailings pipeline feed from concentrator (up to 300 m head), cyclone feed in tailings thickening circuit, tailings transfer to storage facility (short to medium distance), general abrasive slurry handling.
Commonly searched as: heavy duty tailings pump / centerline mounted mine slurry pump / OH2 API 610.
Features: Horizontal single‑stage, double‑suction, radial split, centerline mounting – balanced axial thrust reduces wear, high rigidity for high pressure (up to 5.0 MPa), large flow capacity.
Tailings slurry applications: High pressure long‑distance tailings pipelines (up to 5 MPa), dense tailings transport (high solids concentration), high flow return water from TSF to plant, pumping to deep well injection.
Searches matched: high pressure tailings pump / API 610 BB2 for long slurry pipelines.
Features: Horizontal multi‑stage, axially split – very high head (up to 1000 m) with up to 10 stages, suitable for extreme elevation gains, interstage bushings of hardened material.
Tailings slurry applications: Tailings transport to mountainous TSF (head > 300 m), long distance pipelines requiring high differential pressure without intermediate booster stations, high head mine backfill slurry injection.
Searches matched: multi‑stage high head tailings pump / API 610 BB3 for mountain TSF.
Features: Vertical single‑case, diffuser structure, wet pit installation – low NPSH, large flow up to 4600 m³/h, immersed design without suction pipe, suitable for sump and pit extraction.
Tailings slurry applications: Thickener underflow sump pumping, tailings collection pits, spillage recovery sumps, TSF return water lift station, mill discharge sump where horizontal pump cannot be placed.
Searches matched: vertical tailings sump pump / low NPSH abrasive pit pump / VS1 API 610.
| Model | Flow (m³/h) | Head (m) | Max Temp (°C) | Working Pressure (MPa) | Wear Material Options |
|---|---|---|---|---|---|
| OH2 | 9–2600 | 8–300 | 100 (higher with select alloys) | ≤5.0 | High Chrome A05, Rubber Lined, Ceramic |
| BB2 | 84–1700 | 65–250 | 100 | ≤5.0 (higher on request) | High Chrome A07, Ni‑Hard, Polyurethane |
| BB3 | 35–2000 | 140–1000 | 80 | ≤11.0 | High Chrome A05, A07, Hardened stainless |
| VS1 | 50–4600 | 10–120 | 80 | ≤2.0 | High Chrome, Rubber Lined, Polyurethane |
| Tailings Type | Particle Size / Shape | pH | Recommended Material |
|---|---|---|---|
| Hard rock (iron, copper, gold), coarse, sharp | > 1 mm, angular | 6‑8 | High Chrome White Iron A05 (58‑62 HRC) |
| Soft tailings (phosphate, potash) | < 0.5 mm, rounded | 6‑8 | High Chrome A05 or Ni‑Hard 4 |
| Fine tailings (sulfide, clay) | < 0.1 mm | 3‑5 (acidic) | Rubber lining (natural rubber) if no chemicals; High Chrome A07 if corrosive |
| Corrosive + abrasive (acidic or saline) | any | <5 or >9 | Super Duplex 2507 + High Chrome, or Ceramic lined |
| Abrasive with chemical reagents | any | variable | Polyurethane lining (good abrasion + chemical resistance) |
Standard for this series:
– Most hard rock tailings (copper, gold, iron): High Chrome White Iron A05 (ASTM A532 Class III)
– Fine, non‑abrasive, non‑corrosive tailings: Natural rubber lining
– Acidic tailings (e.g., sulfide): High Chrome A07 + rubber lining
Casing: High Chrome or carbon steel with rubber/urethane liner.
Impeller: High Chrome, rubber covered, or polyurethane.
Shaft: Hardened alloy steel (AISI 4140/4340) with tungsten carbide coated sleeve.
Sealing: Gland packing with external water flush (Plan 32) – preferred for tailings. For mechanical seal: API 682 Plan 32 (clean flush) or Plan 53B for hazard.
Bearings: Heavy‑duty spherical roller bearings (oil bath or oil mist lubrication).
Wear parts: Replaceable wear plates, suction liner, throat bush, frame plate liner.
Q: Which API 610 pump model is best for high pressure long‑distance tailings pipeline (head > 300 m)?
A: BB3 multi-stage pump provides up to 1000 m head in a single unit, ideal for mountainous TSF or long pipelines without intermediate pumps. Use high chrome wetted parts.
Q: Which model is best for pumping tailings from a thickener underflow sump (low NPSH, high solids)?
A: VS1 vertical wet pit pump – immersed directly in sump, handles low NPSH and high solids. Option for rubber lining or high chrome.
Q: Can these pumps handle large particles (e.g., +5 mm)?
A: Yes, with open or semi‑open impellers and enlarged passages. Please specify maximum particle size and concentration.
Q: How do you prevent rapid wear on impeller and casing?
A: We offer high chrome iron (58‑62 HRC) as standard for coarse abrasive tailings. For extreme wear, ceramic coating or replaceable rubber liners are available.
Q: What sealing arrangement is recommended for tailings slurry?
A: For most tailings, gland packing with external clean water flush (Plan 32) is robust and cost‑effective. For toxic tailings or strict emissions, use API 682 double mechanical seal with Plan 53B + clean flush.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive references in mining and tailings transportation worldwide.
Q: What is the design life and wear part replacement interval?
A: Design life ≥30 years. Impeller and liner life depends on abrasiveness – typically 6‑24 months for high chrome in hard rock service. Wear parts are easily replaceable.
Wear‑engineered – High chrome, rubber lining, polyurethane, or ceramic matched to your tailings.
Targeted model coverage – OH2 (main pipeline), BB2 (high pressure), BB3 (very high head), VS1 (sump/pit) for any tailings duty.
High reliability – Heavy‑duty shaft, oversize bearings, thick castings, designed for 24/7 mining operations.
Sealing flexibility – Gland packing or API 682 mechanical seals with proper flush plans.
China competitive pricing – Premium wear materials at lower total cost of ownership.
For inquiries, model selection, or technical support, please provide: tailings composition (ore type, particle size distribution, solids concentration % by weight), pH and chemical environment, temperature, flow (m³/h), head (m), NPSH available, pipeline length and elevation profile, and installation type (horizontal or vertical sump). Our slurry specialists will recommend the optimal API 610 tailings slurry pump with wear material and sealing configuration.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.