Are you searching for a China-made API 610 pump suitable for sandy crude oil applications?
This series includes OH2, BB2, BB3, VS1 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, but engineered with wear-resistant features for sandy crude oil service (crude oil containing sand, silt, scale, or other abrasive solids typically encountered in oilfield gathering systems, flowlines, wet crude handling, desalter feed, and refinery crude units). The fluid may also contain H₂S, CO₂, salts, and water, requiring combined abrasion and corrosion resistance.
With high reliability, extended wear life, long service life (≥30 years) via replaceable wear components, and robust construction, our pumps cover all sandy crude oil handling scenarios – from low pressure wellpad transfer to high pressure long-distance pipeline boosting, from horizontal installation to vertical sump/pit extraction.
Full API 610 Compliance (with abrasive service adaptations) – Designed per API 610 latest edition with increased clearances, hardened materials, heavy wall thickness, and optional NACE MR0175 compliance for sour crude. Passed strict dynamic balancing and hydrostatic tests. Design life ≥30 years, continuous trouble-free operation ≥3 years.
Wear & Corrosion Resistant Materials – Wetted parts available in: High Chrome White Iron (A05/A07, 58+ HRC) for maximum sand abrasion, Hardened Duplex Stainless Steel (2507) for combined abrasion + chloride/H₂S, Tungsten Carbide coating (HVOF applied) on impellers and casings, Ceramic tile lining for extreme sand cuts, or Nickel‑Hard iron. Replaceable wear plates and throat bushes extend pump life.
Solids Handling Design – High efficiency impellers with thick vanes and large flow passages (open or semi-open options) to pass sand particles up to 3‑6 mm. Reduced vane tip speed minimizes erosive wear. Optimized internal flow geometry reduces sand recirculation.
API 682 Sealing with Abrasive Protection – Standard mechanical seals with external clean fluid flush (Plan 32) to keep sand away from seal faces. For very high sand content, gland packing with flushed lantern ring is offered. Double mechanical seals with Plan 53B for hazardous sour crude.
Complete Model Coverage – Four models cover flow 9–4600 m³/h, head 8–1000 m, temperature up to 200°C, pressure up to 11.0 MPa. One-stop solution for sandy crude duties: wellpad transfer, main line pumping, high pressure pipeline boosting, sump collection, and desalter feed.
Flexible Installation – OH2 centerline mount for high temperature; BB2 radial split for high pressure/high flow; BB3 multi-stage for very high head long‑distance; VS1 vertical wet pit for sump extraction of sandy crude from collection tanks.
Features: Horizontal single-stage, centerline support, end suction/top discharge – heavy-duty shaft with oversize bearings, extra clearance at wear rings, centerline mounting for thermal stability (up to 200°C).
Sandy crude oil applications: Wellpad oil transfer with sand content, oil gathering station feed, wet crude handling before desalter, heavy crude with abrasive solids, general pipeline boosting where sand is present.
Commonly searched as: heavy duty sandy crude pump / centerline mounted abrasive oil pump / OH2 API 610.
Features: Horizontal single-stage, double-suction, radial split, centerline mounting – excellent rotor rigidity, high pressure capability, balanced axial thrust reduces wear on bearings and wear rings.
Sandy crude oil applications: High pressure long-distance pipeline transfer of sandy crude, main line pump stations in abrasive service, high flow desalter feed with sand, crude export pumps handling unfiltered sand-laden oil.
Searches matched: high pressure sandy crude pump / API 610 BB2 for abrasive oil pipelines.
Features: Horizontal multi-stage, axially split – very high head (up to 1000 m) with multiple impellers in series, suitable for high elevation or long-distance transport of sandy crude. Interstage bushings made of hardened material.
Sandy crude oil applications: Ultra-high head crude transport across mountainous terrain (sand present), injection into crude storage caverns located at high elevation, long-distance onshore crude lines with minimal intermediate stations, high differential pressure for heavy sandy crude.
Searches matched: multi-stage high head sandy crude pump / API 610 BB3 for long distance.
Features: Vertical single-case, diffuser structure, wet pit installation – low NPSH, large flow up to 4600 m³/h, immersed design eliminates suction piping, ideal for sump or pit extraction of sandy crude.
Sandy crude oil applications: Oilfield tank bottom sump pumping (sand and sludge), slop oil collection pits containing sand, refinery crude oil tank drainage with sediment, spill containment sump recovery.
Searches matched: vertical sump pump for sandy crude / low NPSH abrasive oil pit pump / VS1 API 610.
| Model | Flow (m³/h) | Head (m) | Max Temp (°C) | Working Pressure (MPa) | Wear Material Options |
|---|---|---|---|---|---|
| OH2 | 9–2600 | 8–300 | 200 | ≤5.0 | High Chrome, Hardened Duplex, WC coating |
| BB2 | 84–1700 | 65–250 | 180 | ≤5.0 (higher on request) | High Chrome A07, Ni‑Hard, Ceramic lined |
| BB3 | 35–2000 | 140–1000 | 150 | ≤11.0 | Hardened alloy steel, Tungsten carbide |
| VS1 | 50–4600 | 10–120 | 100 | ≤2.0 | High Chrome, Hardened Duplex |
| Sand Content & Abrasiveness | Corrosivity (H₂S, Cl⁻) | Recommended Materials |
|---|---|---|
| Low sand (<0.1% vol), soft | low (sweet crude) | Hardened carbon steel (WCB with hard coating) |
| Moderate sand (0.1‑1%) | moderate (sour) | Duplex 2205 with nitride hardened impeller |
| High sand (>1%), sharp | low (sweet) | High Chrome White Iron A05 (ASTM A532) |
| High sand + H₂S/Cl⁻ | aggressive | Super Duplex 2507 + tungsten carbide coating |
| Extreme sand, no corrosion | any | Ceramic tile lined casing + WC coated impeller |
Standard for this series:
– Moderate sand, sweet crude: Hardened 316L or Duplex with carbide coating
– High sand, sour crude: High Chrome White Iron (A07) + NACE MR0175 fasteners
Casing: High Chrome, Duplex 2507, or carbon steel with ceramic/tungsten carbide overlay.
Impeller: Same as casing, often with thicker vanes and leading edge hardening.
Shaft: Hardened alloy steel (AISI 4140/4340) with abrasive-resistant sleeve (WC coated).
Sealing: API 682 Plan 32 (external clean fluid flush) or tandem seal Plan 52 for hazardous crude. Gland packing with flushed lantern ring optional for very high sand.
Bearings: Heavy-duty tilting pad or spherical roller with oil mist or forced lubrication.
Wear parts: Replaceable wear plates, throat bush, suction liner, and impeller wear rings.
Q: Which API 610 pump model is best for high pressure long-distance transportation of sandy crude oil?
A: BB2 (single-stage) for moderate head up to 250 m; BB3 (multi-stage) for head exceeding 250 m up to 1000 m. Use high chrome or WC coated impellers for abrasion resistance.
Q: Which model is best for pumping sand-laden crude from a production tank bottom sump?
A: VS1 vertical diffuser wet pit pump – immersed design directly in the sump, handles high sand and low NPSH. Options: rubber lining for fine sand, high chrome for coarse sand.
Q: How do you protect mechanical seals from sand damage?
A: We use API 682 Plan 32 with clean external flush fluid (e.g., filtered diesel or treated water) injected into the seal chamber. For extreme sand, packed gland with continuous flush is recommended.
Q: Are these pumps suitable for heavy, high viscosity sandy crude?
A: Yes. We can supply reduced speed designs, larger clearances, and positive displacement type features. Viscosity up to 5000 cP can be handled with proper engineering. Please provide crude properties.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive experience in abrasive crude pumps for oilfields and pipelines.
Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble-free operation ≥3 years for sandy crude service with correct material selection and wear part replacement schedule.
Q: Can the pump handle H₂S (sour crude) as well as sand?
A: Yes, we offer NACE MR0175 compliant materials (Duplex, Super Duplex, high chrome with appropriate heat treatment) for sour sandy crude.
Wear & corrosion optimized – High chrome, hardened duplex, tungsten carbide, or ceramic linings matched to sand content and crude chemistry.
Targeted model coverage – OH2 (general), BB2 (high pressure), BB3 (very high head), VS1 (sump/pit) for all sandy crude applications.
High reliability – Heavy‑duty bearings, hardened shaft, replaceable wear parts, designed for 24/7 oilfield operation.
Sealing options – Plan 32 clean flush or packed gland for abrasive service; dual seals for sour crude.
China competitive pricing – High performance abrasive-resistant pumps at affordable cost.
For inquiries, model selection, or technical support, please provide: crude oil type (density, viscosity), sand content (wt% or vol%, particle size distribution), temperature, presence of H₂S, CO₂, or chlorides, flow, head, NPSH available, and installation type. Our abrasive slurry & crude specialists will recommend the optimal API 610 sandy crude oil pump with wear material and sealing configuration.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.