Are you searching for a China-made API 610 pump suitable for slurry applications?
This series includes OH2, BB2, BB3, VS1 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, but engineered with heavy-duty wear resistant design for slurry service (mineral slurries, tailings, coal slurry, sand & gravel, dredged materials, industrial waste sludge, chemical process slurries containing solids, and any abrasive/erosive fluid with suspended particles).
With high reliability, excellent wear life, long service life (≥30 years) with replaceable wear components, and robust construction, our pumps cover all slurry handling scenarios – from low pressure transfer to high pressure long-distance pumping, from horizontal installation to vertical sump/pit extraction.
Full API 610 Compliance (with slurry-adapted features) – Designed per API 610 latest edition with increased clearances, heavy wall thickness, and hard metal or elastomer linings. Passed strict dynamic balancing and hydrostatic tests. Design life ≥30 years, continuous trouble‑free operation ≥3 years.
Specialized Wear Materials – Wetted parts available in: High Chrome White Iron (A05, A07, ASTM A532 Class III) for maximum abrasion resistance, Ni-Hard 4, Rubber lining (natural or synthetic) for fine abrasive slurries, Polyurethane lining for good abrasion and corrosion, Ceramic coated for extreme wear. Replaceable wear plates and liners extend pump life.
Solids Handling Design – Closed, semi‑open, or open impellers with large passage sizes to accept solids up to 6‑12 mm depending on model. Low vane tip speeds reduce wear. External flush or expeller seals prevent solids ingress into mechanical seal area.
API 682 Mechanical Seals – Sealing arrangements with clean external flush (Plan 32, Plan 62) or expeller / dynamic seal to protect seal faces from abrasives. Gland packing options available for very abrasive slurries where mechanical seals wear too quickly.
Complete Model Coverage – Four models cover flow 9–4600 m³/h, head 8–1000 m, temperature up to 120°C (higher with select materials). One‑stop solution for slurry duties: mill discharge, tailings transport, cyclone feed, sand pumping, dredge dewatering, thickener underflow, chemical slurry circulation.
Flexible Installation – OH2 centerline mount for heavy duty; BB2 radial split for high pressure/high flow; BB3 multi‑stage for very high head long‑distance slurry transport; VS1 vertical wet pit for sump / pit extraction of abrasive slurry.
Features: Horizontal single‑stage, centerline support, end suction/top discharge – heavy duty shaft, oversized bearings, extra clearance at wear rings, centerline mounting for thermal stability.
Slurry applications: Mill discharge pumps (ball mill, SAG mill), cyclone feed, tailings transport, thickener underflow, sand & gravel washing, general industrial abrasive slurry transfer.
Commonly searched as: heavy duty slurry pump / centerline mounted abrasive pump / OH2 API 610.
Features: Horizontal single‑stage, double‑suction, radial split, centerline mounting – high rigidity, high pressure sealing performance, balanced axial thrust (less wear on bearings).
Slurry applications: High pressure long‑distance tailings pumping, mainline slurry pipeline transport, dense medium cyclone feed, high flow ash slurry handling, dredge mother pump.
Searches matched: high pressure slurry pump / API 610 BB2 for tailings pipelines.
Features: Horizontal multi‑stage, axially split – very high head (up to 1000 m), high pressure (up to 11.0 MPa), multiple impellers in series for long‑distance slurry transport, interstage bushings with slurry‑compatible materials.
Slurry applications: Ultra‑high head tailings disposal (e.g., pumping to high elevation storage), mine dewatering with solids, high pressure chemical slurry injection, long distance coarse slurry transfer over mountainous terrain.
Searches matched: multi‑stage high head slurry pump / API 610 BB3 for long-distance slurry.
Features: Vertical single‑case, diffuser structure, wet pit installation – low NPSH, large flow up to 4600 m³/h, immersed design without suction pipe, suitable for sump and pit slurry extraction.
Slurry applications: Sump pump for abrasive slurry collection, fly ash slurry pit, sand & gravel collecting sump, dredge pit transfer, tailings thickener underflow sump, chemical plant slurry drain.
Searches matched: vertical sump slurry pump / low NPSH abrasive pit pump / VS1 API 610.
| Model | Flow (m³/h) | Head (m) | Max Temp (°C) | Working Pressure (MPa) | Wear Material Options |
|---|---|---|---|---|---|
| OH2 | 9–2600 | 8–300 | 120 | ≤5.0 | High Chrome, Rubber Lined, Polyurethane |
| BB2 | 84–1700 | 65–250 | 100 | ≤5.0 (higher on request) | High Chrome A05, A07 |
| BB3 | 35–2000 | 140–1000 | 100 | ≤11.0 | High Chrome A05, A07, Ni‑Hard |
| VS1 | 50–4600 | 10–120 | 80 | ≤2.0 | High Chrome, Rubber Lined |
| Slurry Type | Solids Size/Abrasiveness | Recommended Wear Material |
|---|---|---|
| Mineral sand, coarse, high abrasion | > 5 mm, sharp particles | High Chrome White Iron (A05) – hardness > 58 HRC |
| Fine tailings, low impact | < 0.5 mm, mild | Rubber lined (natural rubber) – excellent abrasion, no corrosion |
| Combined abrasion + corrosion | presence of low pH or salts | High Chrome A07 (more alloy) or ceramic coated |
| Soft solids, mild abrasion | any | Polyurethane lined – good abrasion, lower cost |
| High temperature (>80°C) abrasive | any | High Chrome A05 with heat treatment |
Standard for this series:
– Most abrasive mineral slurries: High Chrome White Iron ASTM A532 Class III (A05)
– Fine, non‑corrosive slurries: Rubber lining (natural rubber)
– Corrosive + abrasive: High Chrome A07 or Duplex + rubber lining
Casing: High Chrome, or carbon steel with rubber/urethane liner.
Impeller: Same as casing; often high chrome or elastomer.
Shaft: Hardened alloy steel (AISI 4140 or 4340) with protective sleeve.
Sealing: Packing gland with flushed lantern ring (preferred for slurries) or API 682 slurry seal with external clean flush (Plan 32). Double mechanical seals with Plan 53B for hazardous slurries.
Bearings: Heavy‑duty spherical roller bearings with oil lubrication, labyrinth seals against dust.
Wear parts: Replaceable wear plates, liners, throat bush, and impeller.
Q: Which API 610 pump model is best for high pressure long‑distance tailings pipeline?
A: BB2 (single‑stage, up to 250 m head) for moderate head; BB3 (multi‑stage, up to 1000 m head) for very high head mountainous terrain. Both with high chrome wetted parts.
Q: Which model is best for extracting abrasive slurry from a deep sump (low NPSH)?
A: VS1 vertical diffuser wet pit pump – immersed design eliminates suction piping, handles low NPSH, flows up to 4600 m³/h. Option of rubber lining or high chrome.
Q: How do you prevent mechanical seal failure in abrasive slurry?
A: We recommend gland packing with external flush for most slurries. If mechanical seal is required, use API 682 Plan 32 (clean external flush fluid injected at seal face) or Plan 53B with clean barrier fluid. Expeller/dynamic seal also available.
Q: Can these pumps handle large solids?
A: Yes. Impeller designs with large passages (open or semi‑open) available. Please specify maximum particle size.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive experience in slurry pumps for mining and mineral processing.
Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble‑free operation ≥3 years for slurry service with proper wear material selection and periodic replacement of liners/impellers.
Q: Do you offer rubber lining for corrosion plus abrasion?
A: Yes, natural rubber or synthetic rubber lining is excellent for fine abrasive slurries with moderate corrosion. For strong chemicals, use polyurethane or high chrome.
Wear‑engineered – High chrome, rubber, polyurethane, or ceramic matched to slurry abrasiveness and particle size.
Targeted model coverage – OH2 (general slurry), BB2 (high pressure), BB3 (very high head), VS1 (sump/pit extraction) for all applications.
High reliability – Heavy‑duty shaft, oversize bearings, replaceable wear parts, designed for 24/7 severe duty.
Sealing flexibility – Gland packing, expeller, or API 682 mechanical seals with external flush.
China competitive pricing – High quality wear parts at affordable cost.
For inquiries, model selection, or technical support, please provide: slurry composition (solids type, size distribution, concentration), pH (if corrosive), temperature, flow, head, NPSH available, installation type, and expected solids passage size (mm). Our slurry experts will recommend the best API 610 pump with optimal wear material and sealing arrangement.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.