Are you searching for a China-made API 610 pump suitable for heavy oil applications?
This series includes BB1, BB2, BB3 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, engineered for heavy oil service – including heavy crude oil (low API gravity), vacuum residue, heavy fuel oil, bitumen, coker feed, and other high‑viscosity, high‑density hydrocarbons that may contain catalysts fines, coke particles, and other solids. Typical applications include: refinery heavy oil transfer from storage to coker or visbreaker, pipeline transport of heavy crude, fuel oil forwarding, and high‑pressure feed to heavy oil upgrading units.
With special hydraulic design to handle high viscosity (oversized passages, reduced impeller speeds), steam or electric heating jackets to maintain pumpability, hardened materials to resist erosion, and advanced sealing systems to prevent leakage, our pumps provide reliable, long‑life (≥30 years) operation in the most demanding heavy oil services.
Full API 610 Compliance – Designed and manufactured per API 610 latest edition for BB1, BB2, and BB3 constructions. Passed strict dynamic balancing, hydrostatic, and high temperature testing. Design life ≥30 years, continuous trouble‑free operation ≥3 years.
High Viscosity Hydraulic Design – Lower rotational speeds (typically 20‑40% slower than water pumps) to reduce friction losses. Oversized impeller flow passages, trimmed vanes, and large clearances. Pump performance corrected for viscosity per API 610 or HI methods.
Heating Provisions – Steam jackets (or electric trace heating) available on casing, stuffing box, and bearing housing to keep heavy oil fluid at startup and low flow conditions. Thermal insulation of pump casing optional.
High Pressure, High Head Capabilities – BB1 (axial split, single‑stage double‑suction) handles large flow (84‑1700 m³/h) at low head (10‑150 m) for transfer and circulation. BB2 (radial split, single‑stage double‑suction) delivers up to 5.0 MPa (head 65‑250 m) for high‑pressure pipeline or refinery charge. BB3 (multi‑stage axial split) achieves very high head (140‑1000 m) and pressure up to 11.0 MPa for long‑distance heavy oil pipelines.
Wear & Erosion Resistance – Alloy steel (Cr‑Mo) casings and nitrided or stellite‑hardfaced impellers and wear rings to resist abrasion from catalyst fines, coke, or sand. Replaceable wear parts extend pump life.
Advanced Sealing for High Temperature & Viscous Service – API 682 mechanical seals with Plan 62 (steam quench) to prevent heavy oil coking at seal faces. For hazardous or sour heavy oil, double seals Plan 53B/52 with barrier fluid and cooling. Alternative: high temperature packing with steam injection.
Heavy Duty Bearings with Cooling – Large capacity tilting‑pad or rolling element bearings with forced oil lubrication and water cooling; designed for continuous high temperature operation (up to 350°C). Vibration monitoring per API 670.
Easy Maintenance – BB1 and BB3 axial split allow rotor removal without disturbing piping. BB2 radial split also provides convenient access.
Features: Horizontal single‑stage, double‑suction, axially split (horizontal split case) – large flow, low head, maintenance without removing piping. Centerline support available for high temperature.
Heavy oil applications: Heavy crude transfer from tank farm to pipeline or refinery, fuel oil circulation in power plant or marine boiler, bitumen transfer from storage, medium‑viscosity heavy oil loading.
Commonly searched as: split case heavy oil pump / BB1 fuel oil circulation pump.
Features: Horizontal single‑stage, double‑suction, radial split, centerline mounting – high pressure (up to 5.0 MPa), high rigidity, balanced axial thrust, ideal for high temperature heavy oil.
Heavy oil applications: Refinery heavy oil feed to coker or visbreaker (2‑5 MPa), mainline pipeline pumping stations for heavy crude, high pressure fuel oil injection, high temperature heavy oil transfer in delayed coker preheat trains.
Searches matched: high pressure heavy oil pump / BB2 coker charge pump.
Features: Horizontal multi‑stage, axially split (centerline supported) – up to 8 stages, very high head (140‑1000 m), pressure up to 11.0 MPa, excellent axial thrust balance.
Heavy oil applications: Long‑distance heavy oil pipelines over high elevation terrain, ultra‑high head single‑station pumping for very viscous crude, high pressure feed to heavy oil hydroprocessing units (e.g., H‑Oil, LC‑Fining), heavy oil injection into wells (EOR).
Searches matched: multi‑stage high head heavy oil pump / BB3 long‑distance crude line pump.
| Model | Flow (m³/h) | Head (m) | Max Temp (°C) | Working Pressure (MPa) | Typical Stages |
|---|---|---|---|---|---|
| BB1 | 84–1700 | 10–150 | 300 (350 with Cr‑Mo) | ≤2.5 | 1 |
| BB2 | 84–1700 | 65–250 | 350 | ≤5.0 (higher on request) | 1 |
| BB3 | 35–2000 | 140–1000 | 350 | ≤11.0 | 2‑8 |
| Component | Standard Material | High Temp / Erosion Option | Notes |
|---|---|---|---|
| Casing | WCB carbon steel (≤250°C) | WC6/WC9 (Cr‑Mo) for 350°C | |
| Impeller | WCB / CF8M | Cr‑Mo steel + nitride / stellite | Reduce viscosity, resist sand |
| Wear rings | 17‑4 PH | Stellite 6 or 12 (hardfaced) | Replaceable |
| Shaft | AISI 4140/4340 | 17‑4 PH H1150 | Hardened |
| Bolting | B7 | B7M/L7M (NACE) | For sour heavy oil |
| Seal | API 682 Plan 62 (steam quench) | Plan 53B for sour / dual | Steam prevents coking |
| Bearing | Rolling element, oil lube | Tilting‑pad, forced oil + water cooler | For high temp |
| Heating | Steam jacket optional | Electric trace heating | For viscosity reduction |
For heavy oil containing H₂S (sour), NACE MR0175 compliant materials (hardness control, sour service bolting) are provided.
Q: Which API 610 pump model is best for high pressure heavy oil feed to a coker (5 MPa, 350°C)?
A: BB2 radial split pump with Cr‑Mo steel (WC9), steam quench seals (Plan 62), and water cooled bearings is ideal for high temperature, high pressure heavy oil.
Q: Which model is recommended for very high head (800 m) heavy crude pipeline over mountains?
A: BB3 multi‑stage axial split pump offers head up to 1000 m and pressure up to 11 MPa. Use reduced speed for viscosity and hardened components.
Q: How do you handle high viscosity (e.g., 2000 cSt) at startup?
A: We provide steam jackets on casing and seal housing, plus optional external electric heat tracing. The pump can be operated at reduced speed (VFD) until oil temperature increases. Also oversized inlet passages.
Q: Can these pumps handle solids (coke fines, catalyst)?
A: Yes. Use nitrided Cr‑Mo or stellite‑hardfaced impellers and wear rings, plus increased clearances. Plan 32 (clean external flush) protects mechanical seals.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive references in heavy oil pumping for refineries and pipelines.
Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble‑free operation ≥3 years for heavy oil service with proper maintenance and viscosity management.
Full model coverage – BB1 (large flow/low head), BB2 (high pressure), BB3 (very high head/long distance).
Viscosity optimized – reduced speed, oversized passages, heating jackets.
High temperature capability up to 350°C with Cr‑Mo.
Erosion resistance – hardened impellers and wear rings.
Advanced sealing – steam quench Plan 62 prevents coking.
China competitive pricing without compromising API 610 quality.
For inquiries, model selection, or technical support, please provide: heavy oil type (crude, residue, fuel oil), viscosity (cSt at pumping temperature), density (°API), temperature (°C), flow (m³/h), head (m), required discharge pressure (MPa), solids content (wt%), NPSH available, and any special requirements (steam jacket, NACE). Our heavy oil specialists will recommend the optimal API 610 pump (BB1/BB2/BB3) with viscosity corrections, material upgrades, and heating provisions.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.