API 610 Asphalt Pump – China Manufacturer | BB1/BB2/BB3 for Hot Bitumen & High Viscosity Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 610 asphalt pump series, manufactured in China. Includes BB1, BB2, BB3 models. Flow range 35–1700 m³/h, head up to 1000 m, temperature up to 250°C, pressure up to 11.0 MPa. Designed for handling hot liquid asphalt (bitumen) in refineries, asphalt plants, storage terminals, and road construction. Features high temperature materials (Cr-Mo steel), steam or thermal oil heating jackets on casing and seal housings, low speed design for high viscosity, hardened wear rings to resist abrasion from fillers, API 682 high temperature mechanical seals with Plan 62 (steam quench) or Plan 53B, and heavy‑duty bearings with cooling. BB1 axial split for large flow low head transfer; BB2 radial split for high pressure moderate head; BB3 multi‑stage for very high head or long‑distance pumping. API 610 compliant, 30-year design life.
Conatct For Details
DetailReview(0)Additional

Product Overview

Are you searching for a China-made API 610 pump suitable for asphalt applications?
This series includes BB1, BB2, BB3 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, engineered for hot liquid asphalt (bitumen) service. Asphalt is a high‑viscosity, high‑temperature hydrocarbon that may contain mineral fillers, sand, or polymer modifiers. Typical applications include: refinery asphalt transfer from vacuum unit or oxidation tower, asphalt storage tank circulation, loading to tank trucks or railcars, pipeline transport of hot bitumen, and feed to blending or roofing felt plants.

With special hydraulic design for high viscosity (reduced speeds, oversize passages), steam or thermal oil heating jackets to maintain fluidity, hardened materials to resist abrasive fillers, and advanced high‑temperature sealing, our pumps provide reliable, long‑life (≥30 years) operation in the most demanding asphalt services.

Core Advantages

  • Full API 610 Compliance – Designed and manufactured per API 610 latest edition for BB1, BB2, and BB3 constructions. Passed strict dynamic balancing, hydrostatic, and high temperature testing. Design life ≥30 years, continuous trouble‑free operation ≥3 years.

  • High Viscosity Hydraulic Design – Operating speeds significantly lower than water pumps (typically 500‑1200 rpm). Oversized impeller flow passages, large clearances, and trimmed vanes. Pump performance corrected for viscosity per API 610. Reduced NPSH requirements.

  • Heating Jackets for Asphalt – Steam or thermal oil jackets are provided on casing, stuffing box, and seal housing to keep asphalt fluid at startup and during low‑flow conditions. Thermal insulation of pump casing optional. Electric trace heating available for smaller pumps.

  • High Pressure, High Head Capabilities – BB1 axial split (single‑stage double‑suction) handles large flow (84‑1700 m³/h) at low head (10‑150 m) for terminal transfer and circulation. BB2 radial split (single‑stage double‑suction) delivers up to 5.0 MPa (head 65‑250 m) for high‑pressure pipeline or refinery charge. BB3 multi‑stage axial split achieves very high head (140‑1000 m) and pressure up to 11.0 MPa for long‑distance hot bitumen pipelines.

  • Abrasion Resistance – Asphalt often contains sand, mineral fillers, or catalyst fines. We supply hardened Cr‑Mo steel (WC6/WC9) casings with nitrided or stellite‑hardfaced impellers and wear rings. Replaceable wear parts extend pump life.

  • Advanced High‑Temperature Sealing – API 682 mechanical seals with Plan 62 (low‑pressure steam quench) to prevent asphalt hardening and coking at seal faces. For emission‑sensitive applications, dual seals Plan 53B with barrier fluid and cooling are available. Alternative: high‑temperature packing with steam injection.

  • Heavy Duty Bearings with Cooling – Large capacity rolling element or tilting‑pad bearings with forced oil lubrication and water cooling (or air cooling). Bearing housing temperature monitoring per API 670.

  • Easy Maintenance – BB1 and BB3 axial split designs allow rotor removal without disturbing piping. BB2 radial split also provides convenient access.

Main Models & Applications

BB1 (Single-stage, Double-suction, Axial Split)

Features: Horizontal single‑stage, double‑suction, axially split – large flow, low head, maintenance without removing piping. Centerline support available for high temperature.
Asphalt applications: Asphalt transfer from storage tanks to loading racks, circulation in blending plants, low‑head feeding to coating units, tank farm inter‑transfer.
Commonly searched as: split case asphalt pump / BB1 bitumen transfer pump.

BB2 (Single-stage, Double-suction, Radial Split)

Features: Horizontal single‑stage, double‑suction, radial split, centerline mounting – high rigidity, high pressure (up to 5.0 MPa), balanced axial thrust, ideal for high temperature asphalt.
Asphalt applications: Refinery asphalt charge to oxidizer or vacuum tower (2‑5 MPa), mainline hot bitumen pipeline stations, high pressure loading to ship or rail.
Searches matched: high pressure asphalt pump / BB2 bitumen charge pump.

BB3 (Multi-stage, Axial Split)

Features: Horizontal multi‑stage, axially split (centerline supported) – up to 8 stages, very high head (140‑1000 m), pressure up to 11.0 MPa, excellent axial thrust balance.
Asphalt applications: Long‑distance hot asphalt pipelines over high elevation terrain, ultra‑high head single‑station pumping to remote storage, high pressure feed to modified asphalt reactors.
Searches matched: multi‑stage high head asphalt pump / BB3 long‑distance bitumen pump.

Performance Parameters Table

ModelFlow (m³/h)Head (m)Max Temp (°C)Working Pressure (MPa)Typical Stages
BB184–170010–150250≤2.51
BB284–170065–250250≤5.0 (higher on request)1
BB335–2000140–1000250≤11.02‑8

Material Configuration (Asphalt Service)

ComponentStandard MaterialHigh Abrasion / Sour OptionNotes
CasingWCB carbon steelWC6/Cr‑Mo steel for >200°CHeating jacket
ImpellerWCB or CF8MCr‑Mo + nitride / stelliteHardened for abrasion
Wear rings17‑4 PHStellite 6/12 hardfacedReplaceable
ShaftAISI 4140/434017‑4 PH H1150Hardened
BoltingB7B7M/L7M (NACE)For sour asphalt (rare)
SealAPI 682 Plan 62 (steam quench)Plan 53B dual for emissionsFaces: SiC vs carbon
BearingRolling element, oil lubeTilting‑pad, forced oil + coolerCooling essential
HeatingSteam jacket (std)Thermal oil or electricMaintain asphalt fluid
  • For asphalt containing H₂S (sour), NACE MR0175 compliant materials provided on request.

FAQ – Frequently Asked Questions for Asphalt API 610 Pumps

Q: Which API 610 pump model is best for high pressure asphalt feed to an oxidizer (3‑4 MPa, 250°C)?
A: BB2 radial split pump with Cr‑Mo steel (WC6/WC9), steam jacket, and API 682 Plan 62 (steam quench) seals. Use water cooled bearings.

Q: Which model is recommended for very high head (800 m) hot bitumen pipeline over a mountain?
A: BB3 multi‑stage axial split pump, reduced speed (800‑1000 rpm), with steam jacketed casing and hardened impellers. Provide viscosity correction for performance.

Q: How do you handle high viscosity asphalt at startup (e.g., 5000 cSt)?
A: Steam jackets on all wetted parts, pre‑heating of pump and piping, and reduced speed operation (VFD). Large inlet passages and oversize shaft.

Q: Can these pumps handle asphalt with sand or filler particles?
A: Yes. Use nitrided Cr‑Mo impellers, stellite wear rings, and increase internal clearances. For severe abrasion, ceramic coatings or high chrome iron.

Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive references in asphalt pumping for refineries and blending plants.

Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble‑free operation ≥3 years for asphalt service with proper heating and seal maintenance.

Why Choose Our API 610 Asphalt Pump Series?

  • Full model coverage – BB1 (large flow/low head), BB2 (high pressure), BB3 (very high head/long distance).

  • Viscosity optimized – reduced speed, oversized passages, heating jackets.

  • High temperature capability up to 250°C (350°C with special alloys).

  • Abrasion resistance – hardened impellers and wear rings.

  • Advanced sealing – steam quench Plan 62 prevents coking.

  • China competitive pricing without compromising API 610 quality.

Contact Us

For inquiries, model selection, or technical support, please provide: asphalt type (penetration grade, viscosity at pumping temperature, softening point), temperature (°C), flow (m³/h), head (m), required discharge pressure (MPa), presence of fillers/solids (wt%), NPSH available, and heating medium (steam, thermal oil, electric). Our asphalt specialists will recommend the optimal API 610 pump (BB1/BB2/BB3) with viscosity corrections, material upgrades, and heating provisions.

Email: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit