Are you searching for a China-made API 610 pump suitable for high‑viscosity fluids?
This series includes BB1, BB2, BB3 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, engineered specifically for high‑viscosity fluid service. This includes heavy crude oil, vacuum residue, asphalt (bitumen), heavy fuel oil, molasses, glucose syrups, polymer melts (e.g., PS, PET, PTA), high‑viscosity chemicals, lubricants, and any non‑Newtonian or low‑fluidity liquids. Typical applications: refinery heavy oil transfer, asphalt loading, polymer plant feed, high‑viscosity pipeline transport, and storage terminal circulation.
With special hydraulic design (low speed, oversized passages), heating jackets to reduce effective viscosity, hardened internals to resist abrasion from fillers or additives, and advanced high‑temperature sealing, our pumps provide reliable, long‑life (≥30 years) operation for the most challenging viscous services.
Full API 610 Compliance – Designed and manufactured per API 610 latest edition for BB1, BB2, and BB3 constructions. Passed strict dynamic balancing, hydrostatic, and high temperature testing. Viscosity‑corrected performance curves per API 610 or HI methods. Design life ≥30 years, continuous trouble‑free operation ≥3 years.
High Viscosity Hydraulic Design – Operating speeds reduced (typically 500‑1200 rpm, depending on viscosity). Oversized impeller flow channels, wider clearances, and trimmed vane angles to minimize friction losses. NPSH calculations account for viscous effects.
Heating Jackets & Thermal Management – Steam, thermal oil, or electric heating jackets are available on casing, stuffing box, and bearing housing to maintain fluidity during startup and low flow. Thermal insulation of pump casing optional. This prevents solidification or excessive drag.
High Pressure, High Head Capabilities – BB1 axial split (single‑stage double‑suction) handles large flow (84‑1700 m³/h) at low head (10‑150 m) for terminal transfer and circulation. BB2 radial split (single‑stage double‑suction) delivers up to 5.0 MPa (head 65‑250 m) for high‑pressure pipelines or reactor charge. BB3 multi‑stage axial split achieves very high head (140‑1000 m) and pressure up to 11.0 MPa for long‑distance viscous pipelines.
Abrasion Resistance – Many high‑viscosity fluids contain solid particles (coke fines, catalyst, fillers, salt). We supply hardened Cr‑Mo steel (WC6/WC9) casings with nitrided or stellite‑hardfaced impellers and wear rings. High chrome white iron (A05) can be used for extreme abrasion.
Advanced Sealing for Viscous & Hot Service – API 682 mechanical seals with Plan 62 (low‑pressure steam or water quench) to prevent fluid coking or hardening at seal faces. For emission‑sensitive or hazardous fluids, double seals Plan 53B with barrier fluid and cooling are provided. Alternative: high‑temperature packing with flush injection for very low speeds.
Heavy Duty Bearings & Drive – Large capacity rolling element or tilting‑pad bearings with forced oil lubrication and water/air cooling. Extended shaft keyways and higher torque capacity. Vibration and temperature monitoring per API 670.
Easy Maintenance – BB1 and BB3 axial split designs allow rotor removal without disturbing piping. BB2 radial split also provides convenient access.
Features: Horizontal single‑stage, double‑suction, axially split – large flow, low head, maintenance without removing piping. Centerline support available for high temperature.
High‑viscosity fluid applications: Heavy oil transfer from storage to refinery; molasses or syrup circulation in food plants; asphalt loading to trucks; low‑head transfer of viscous polymers in blending units.
Commonly searched as: split case high viscosity pump / BB1 heavy fluid transfer pump.
Features: Horizontal single‑stage, double‑suction, radial split, centerline mounting – high rigidity, high pressure (up to 5.0 MPa), balanced axial thrust, ideal for hot viscous service.
High‑viscosity fluid applications: High pressure asphalt feed to oxidizer (2‑5 MPa); heavy crude mainline pipeline stations; polymer melt injection into extruders; high pressure transfer of lubricating oils.
Searches matched: high pressure high viscosity pump / BB2 viscous fluid charge pump.
Features: Horizontal multi‑stage, axially split (centerline supported) – up to 8 stages, very high head (140‑1000 m), pressure up to 11.0 MPa, excellent axial thrust balance.
High‑viscosity fluid applications: Long‑distance heavy oil pipelines over high terrain; pumping hot bitumen from terminal to storage caverns at high elevation; high head feed to visbreaker or hydrocracker for very viscous feeds.
Searches matched: multi‑stage high head high viscosity pump / BB3 long‑distance viscous pipeline pump.
| Model | Flow (m³/h) | Head (m) | Max Temp (°C) | Working Pressure (MPa) | Typical Stages |
|---|---|---|---|---|---|
| BB1 | 84–1700 | 10–150 | 350 | ≤2.5 | 1 |
| BB2 | 84–1700 | 65–250 | 350 | ≤5.0 (higher on request) | 1 |
| BB3 | 35–2000 | 140–1000 | 350 | ≤11.0 | 2‑8 |
All performance curves require viscosity correction. Speed, impeller diameter, and efficiency will be adjusted based on fluid cSt at operating temperature.
| Component | Standard Material | High Temp / Abrasion Option | Notes |
|---|---|---|---|
| Casing | WCB carbon steel | WC6/WC9 (Cr‑Mo) for >250°C | Heating jacket fitted |
| Impeller | WCB or CF8M | Cr‑Mo + nitride / stellite / high chrome | Hardened for wear |
| Wear rings | 17‑4 PH | Stellite 6/12 hardfaced | Replaceable |
| Shaft | AISI 4140/4340 (high torque) | 17‑4 PH H1150 | Hardened, higher key size |
| Bolting | B7 | B7M/L7M (NACE) | For sour viscous fluids |
| Seal | API 682 Plan 62 (steam quench) | Plan 53B dual for emissions | Faces: TC vs C / SiC |
| Bearing | Rolling element, forced oil | Tilting‑pad + water cooler | High load capacity |
| Heating | Steam jacket (standard) | Thermal oil or electric trace | Maintain fluidity |
For fluids containing H₂S or chlorides, NACE MR0175 or duplex materials can be supplied.
Q: Which API 610 pump model is best for high pressure, high viscosity asphalt (500 cSt at 200°C, 4 MPa discharge)?
A: BB2 radial split pump with Cr‑Mo steel, steam jacket, and Plan 62 seals. Reduce speed to 800-1000 rpm, oversize impeller passages.
Q: Which model is recommended for very high head (800 m) viscous heavy crude pipeline through mountains?
A: BB3 multi‑stage axial split pump, reduced speed (600‑900 rpm), with steam jackets and viscosity‑corrected stage design.
Q: How do you handle extreme viscosities (e.g., 10,000 cSt) at startup?
A: Steam or thermal oil jacketing of entire casing and seal area, pre‑heating recirculation line, and VFD to slowly ramp up speed. Oversized inlet and flow passages.
Q: Can these pumps handle fluids with fillers (sand, talc, carbon black)?
A: Yes. Use hardened impellers (stellite or high chrome), increased clearances, and Plan 32 (clean flush) for seals. Replaceable wear liners.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive references in heavy oil, asphalt, and polymer services.
Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble‑free operation ≥3 years for high viscosity service with proper heating and seal maintenance.
Full model coverage – BB1 (large flow/low head), BB2 (high pressure), BB3 (very high head/long distance).
Viscosity‑optimized – low speed, oversized passages, heating jackets.
High temperature capability up to 350°C with Cr‑Mo.
Abrasion resistance – hardened impellers and wear rings.
Advanced sealing – steam quench Plan 62 or dual seals.
China competitive pricing without compromising API 610 quality.
For inquiries, model selection, or technical support, please provide: fluid name, viscosity (cSt at pumping temperature), density (°API or kg/m³), temperature (°C), flow (m³/h), head (m), required discharge pressure (MPa), solids content (wt%), NPSH available, and heating medium (steam, thermal oil, electric). Our specialist will recommend the optimal API 610 high‑viscosity pump (BB1/BB2/BB3) with viscosity correction, material upgrades, and heating provisions.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.