Are you searching for a China-made API 610 pump suitable for oilfield high‑pressure water injection?
This series includes BB4, BB5 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, engineered for high‑pressure water injection in oilfield secondary recovery (water flooding). Typical applications include: injecting seawater, produced water, or aquifer water into reservoir formations at pressures up to 30 MPa to enhance oil recovery. The pumped water often contains sand, scale, corrosion by‑products, and residual oil, requiring high reliability, erosion resistance, and long continuous operation.
With multi‑stage hydraulic design to achieve extremely high discharge pressures, hardened internal components to resist abrasive wear, advanced high‑pressure sealing (API 682 Plan 53B), and heavy‑duty bearing systems, our pumps provide safe, reliable, long‑life (≥30 years) operation in the most demanding water injection services.
Full API 610 Compliance – Designed and manufactured per API 610 latest edition for BB4 and BB5 constructions. Passed strict dynamic balancing, hydrostatic, and high‑pressure testing. Design life ≥30 years, continuous trouble‑free operation ≥3 years.
Ultra‑High Pressure Capability – BB4 radially split barrel pump (inner casing within forged outer barrel) handles pressures up to 30 MPa (or higher) and heads up to 3000 m with up to 12 stages. BB5 axially split multi‑stage pump handles pressures up to 15 MPa and heads up to 1200 m for moderate pressure injection.
Erosion & Corrosion Resistance – Water injection streams often contain abrasive sand (0.01‑0.1% wt) and corrosive agents (CO₂, H₂S, chlorides). We use hardened impellers and diffusers (stellite or tungsten carbide coating), high chromium white iron wear stages, and duplex stainless steel for casing in severe corrosive environments.
Advanced High‑Pressure Sealing – API 682 dual mechanical seals (pressurized Plan 53B) with clean barrier fluid (glycol/water or oil). Barrier pressure maintained above injection pressure to guarantee zero outward leakage – critical for environmental safety. Seal faces: tungsten carbide vs tungsten carbide with Inconel bellows.
Heavy‑Duty Bearings & Rotor – High‑load tilt‑pad bearings with forced oil lubrication and water cooling. Rotor dynamically balanced at operating speed. Vibration and temperature monitoring per API 670. Thrust balancing device (balance drum or opposed impellers) for multi‑stage pumps.
Materials for Sour & Saline Water – For produced water with H₂S, NACE MR0175 compliant materials (low carbon steel with hardness control, corrosion resistant alloys). For seawater injection, super duplex stainless steel (2507) is available.
Easy Maintenance – BB5 axial split allows rotor removal without disturbing piping. BB4 barrel design requires pulling rotor, but provides highest pressure containment.
Features: Horizontal multi‑stage, radially split barrel (inner stage casing enclosed in a forged outer barrel) – extremely high pressure (up to 30 MPa), head up to 3000 m (up to 12 stages). Safe containment of high pressure without risk of leaks. Rotating element pulls out horizontally.
Water injection applications: High‑pressure water injection into deep reservoirs (20‑30 MPa), long‑distance water pipelines with high elevation gain, seawater or produced water injection in offshore platforms (high pressure), enhanced oil recovery (EOR) water flood projects requiring >15 MPa.
Commonly searched as: barrel type water injection pump / BB4 high pressure injection pump.
Features: Horizontal multi‑stage, axially split casing (centerline supported) – up to 8 stages, head up to 1200 m, working pressure up to 15 MPa. Lower cost alternative to BB4 for moderate pressures. Rotor accessible by removing top half casing without disturbing piping.
Water injection applications: Medium‑pressure water injection (5‑15 MPa) into shallow or mid‑depth reservoirs, water transfer from treatment plant to injection pumps, booster after BB4 in multi‑train systems, produced water reinjection (moderate pressure).
Searches matched: axial split multi‑stage water injection pump / BB5 water flood booster.
| Model | Flow (m³/h) | Head (m) | Max Temp (°C) | Working Pressure (MPa) | Typical Stages |
|---|---|---|---|---|---|
| BB4 | 35–800* | up to 3000 | 120 | ≤30.0 (higher on request) | 4‑12 |
| BB5 | 35–1200 | up to 1200 | 120 | ≤15.0 | 2‑8 |
*BB4 flow range typical for water injection: up to 800 m³/h (larger sizes possible). High head requires more stages.
| Component | Standard (Sweet water, low sand) | Erosion / Corrosion Option | Notes |
|---|---|---|---|
| Casing (BB5) | WCB carbon steel | Duplex 2205/2507 or 316L | For saline or sour |
| Outer barrel (BB4) | Forged low alloy steel (A350 LF2) | Duplex or 17‑4 PH | High pressure |
| Inner stage casing | WCB or CF8M | Duplex, high chrome iron | Abrasion resistant |
| Impeller / diffuser | WCB / CF8M | Nitrided Cr‑Mo, stellite overlay, high chrome | Hardness >55 HRC |
| Wear rings / interstage bushings | 17‑4 PH | Stellite 6/12 or tungsten carbide | Replaceable |
| Shaft | AISI 4140/4340 (high strength) | 17‑4 PH H1150, duplex | High torque |
| Bolting | B7 | B7M (NACE) or L7M | For sour water |
| Seal | API 682 Plan 53B dual (pressurized) | Same | Barrier: glycol/water |
| Bearing | Tilting‑pad, forced oil + cooler | Same | High load |
| Gaskets | Spiral wound graphite 316L | PTFE for low temp |
For water containing H₂S (sour service), NACE MR0175 compliance with hardness ≤235 HB and appropriate alloys (e.g., 17‑4 PH H1150).
For seawater injection: super duplex 2507 for all wetted parts.
Q: Which API 610 pump model is best for very high pressure water injection (25 MPa, deep reservoir)?
A: BB4 radial split barrel pump. It is designed for pressures up to 30 MPa and heads up to 3000 m. Provide hardened stages if water contains sand.
Q: Which model is recommended for medium pressure injection (10 MPa) with lower capital cost?
A: BB5 axial split multi‑stage pump offers up to 15 MPa, easier maintenance (no need to remove piping), and lower initial cost.
Q: How do you handle abrasive sand in injection water?
A: We use hardened impellers and diffusers (stellite or HVOF tungsten carbide), increased clearances, and replaceable hard wear rings. Optionally, high chrome white iron stage internals.
Q: What sealing configuration prevents leakage of high pressure water?
A: API 682 Plan 53B dual pressurized mechanical seals with barrier fluid (glycol/water). Barrier pressure is maintained 1‑2 MPa higher than pump discharge pressure, ensuring zero outward leakage. Leak detection and alarm provided.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive references in oilfield water injection projects onshore and offshore.
Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble‑free operation ≥3 years for water injection service with proper maintenance and clean injection water.
Ultra‑high pressure BB4 up to 30 MPa, BB5 up to 15 MPa – covers all reservoir depth requirements.
Erosion engineered – hardened stages for abrasive water.
Corrosion resistant options – duplex, super duplex, NACE for sour/ saline water.
Zero emissions – API 682 Plan 53B dual seals.
High reliability – tilt‑pad bearings, forced lube, vibration monitoring.
China competitive pricing without compromising API 610 quality.
For inquiries, model selection, or technical support, please provide: injection pressure (MPa), flow (m³/h), water source (seawater, produced water, aquifer), sand content (ppm, size), water temperature (°C), corrosive agents (CO₂, H₂S, chlorides), and installation requirements. Our water injection specialists will recommend the optimal API 610 pump (BB4 or BB5) with appropriate materials, stages, and sealing.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.