Are you searching for a China-made API 610 pump suitable for low‑level fluid applications?
This series includes VS1, VS2, VS5, VS6 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, engineered specifically for pumping fluids from extremely low liquid levels where the available NPSH is very limited. Typical applications include: tank bottom evacuation (draining nearly empty storage tanks), underground sumps and pits, collection basins, secondary containment sumps, underground caverns, marine bilge wells, and low‑level extraction of hazardous, cryogenic, or high‑temperature liquids. The fluid can be crude oil, refined products, chemicals, solvents, LPG, ethylene, ammonia, acidic or caustic wastewater, and many others.
With a vertical, immersed pump design (barrel or column suspended into the low liquid level), a low NPSH inducer or specially designed first stage impeller, and the ability to operate at submergence as low as 500‑1000 mm, our pumps provide reliable, long‑life (≥30 years) operation for the most challenging “bottom of the tank” duties.
Full API 610 Compliance – Designed and manufactured per API 610 latest edition for VS1, VS2, VS5, VS6. Passed dynamic balancing, hydrostatic, cryogenic, and high‑temperature testing. Design life ≥30 years, continuous trouble‑free operation ≥3 years.
Extremely Low NPSH for Low Liquid Levels – All models are vertical, with the first impeller set below the minimum anticipated liquid level. Inducer (helical screw type) is standard on VS5/VS6 and optional on VS1/VS2, reducing NPSH required to less than 0.5‑1.5 m (depending on speed). Large tank sump effect often ensures adequate NPSHa even with liquid depth just above the suction bell.
Wide Head & Flow Range – VS1 (diffuser, single‑stage) for large flow (50‑4600 m³/h) at low head (10‑120 m) – ideal for large tank bottom removal. VS2 (volute, single‑stage) for medium head (30‑300 m) with good anti‑cavitation. VS5 (single‑casing multi‑stage, up to 5 MPa, head up to 1000 m) for high head extraction from deep pits to elevate liquid to ground level treatment. VS6 (double‑casing multi‑stage, up to 15 MPa, head up to 1200+ m) for very high pressure injection or long distance transfer from low‑level caverns.
Material Versatility – Wetted parts available in: carbon steel (WCB/LCB), low‑temp carbon steel (LCB/LCC), 304/316L stainless steel, 9% nickel steel (cryogenic to -100°C), duplex/super duplex, Alloy 20, Hastelloy, and PTFE/PFA‑lined carbon steel for severe corrosives. All materials impact tested to MDMT.
Advanced Low‑Emission Sealing – API 682 dual mechanical seals (pressurized Plan 53B) with barrier fluid are standard for volatile, hazardous, or cryogenic fluids to eliminate fugitive emissions. For non‑hazardous service, Plan 11+62 or gland packing can be used. Seal faces: tungsten carbide vs carbon, SiC vs SiC, or special cryogenic seals.
Explosion Proof & ATEX – Motors and electrical components can be supplied with ATEX / IECEx certification (Zone 1 or Zone 2) for areas where flammable vapors may be present (tank farms, petrochemical plants). Complete pump column is sealed and grounded.
Vertical Immersed Design – No external suction piping, no priming required, and the pump inherently handles any fluctuations in liquid level down to the last few centimeters. Bearing housing and motor stay above grade, safe from flooding.
Easy Maintenance – Pull‑out design (for VS1/VS2) allows rotating element to be removed without digging out the column. For VS5/VS6, the entire barrel can be extracted using a crane. All models have replaceable wear rings and bushings.
Features: High flow, low head, diffuser casing – efficient for large volumes. Optional inducer for low NPSH. Open or semi‑open impeller available for dirty services.
Low‑level fluid applications: Tank farm bottom scavenge pumps (crude, product, slop), large sump evacuation, stormwater retention basin pump‑out, clean‑in‑place (CIP) recovery pits.
Commonly searched as: high flow low head tank bottom pump / VS1 pit evacuation pump.
Features: Medium flow (20‑1200 m³/h), head up to 300 m, volute casing gives stable operation. Excellent anti‑cavitation with suitable inducer.
Low‑level fluid applications: Intermediate head transfer from tank bottoms to process units or loading racks; underground product storage cavern extraction (low NPSH); chemical sump transfer against higher back pressure.
Searches matched: medium head low NPSH pump / VS2 cavern transfer pump.
Features: Multi‑stage (single barrel), head up to 1000 m, pressure up to 5 MPa. Inducer on first stage as standard. Compact, moderate pressure capability.
Low‑level fluid applications: Deep underground tank or cavern extraction requiring high head to reach surface facilities; high volume low NPSH pumping for long distance; oil terminal deep well pumps (5‑10 stages).
Searches matched: multi‑stage low NPSH barrel pump / VS5 deep well hydrocarbon pump.
Features: Double casing (inner stage casing inside outer pressure barrel), head up to 1200+ m, pressure up to 15 MPa (higher possible). Inducer first stage, very low NPSH. Safe containment for high‑pressure hazardous fluids.
Low‑level fluid applications: LPG, propane, ammonia, ethylene cavern extraction at very high pressure (10‑15 MPa); deep well high pressure injection of hazardous waste; high purity chemical transfer from low level sump to high pressure reactor.
Searches matched: double casing high pressure cavern pump / VS6 ultra‑high head low NPSH pump.
| Model | Flow (m³/h) | Head (m) | Max Temp (°C) | Working Pressure (MPa) | Stages | Min Submergence (m) |
|---|---|---|---|---|---|---|
| VS1 | 50–4600 | 10–120 | 250 | ≤2.0 | 1 | 1.0 (0.5 with inducer) |
| VS2 | 20–1200 | 30–300 | 250 | ≤3.0 | 1 | 1.2 (0.6 with inducer) |
| VS5 | 10–800* | up to 1000 | 250 | ≤5.0 | 2‑10 | 0.8 (with inducer) |
| VS6 | 10–800* | up to 1200+ | 250 | ≤15.0 (higher possible) | 4‑14 | 0.8 (with inducer) |
*Flow range for VS5/VS6 up to 800 m³/h typical; consult for higher flows.
| Fluid Type | Recommended Materials |
|---|---|
| Crude, refined products, ambient | Carbon steel WCB/LCB |
| High temperature (>200°C) | Cr‑Mo steel WC6/WC9 or 304L |
| Cryogenic (down to -100°C) | 9% nickel steel or 304L |
| LPG, ethylene, propylene | LCB/LCC or 304L |
| Corrosive acids (H₂SO₄, HCl) | Alloy 20, Hastelloy C‑276, PTFE lined |
| Caustic (NaOH) | 316L or Nickel 200 |
| Seawater / brine | Duplex 2205/2507 |
| High purity chemicals | 304L/316L, electro‑polished |
Shaft: 17‑4 PH (H1150) or AISI 4340 high strength.
Seal: API 682 Plan 53B (dual pressurized) for volatile/hazardous; Plan 11+62 for non‑hazardous.
Bearing: Roller or tilt‑pad thrust bearing for VS5/VS6 with oil lubrication.
Q: Which model is best for pumping the last 300 mm of crude oil from a large storage tank (low NPSH, 1500 m³/h, 50 m head)?
A: VS1 with inducer (low NPSH option). Use low level intake design with submergence as low as 0.8 m.
Q: We have a cavern containing LPG at high pressure (12 MPa) and very low liquid level. Which pump?
A: VS6 double‑casing barrel pump with inducer. It provides extremely low NPSH and discharge pressure up to 15 MPa. All components NACE for sour LPG if needed.
Q: Can VS2 handle intermediate head (200 m) for pumping chemical residue from a sump with pH 2?
A: Yes. Specify Alloy 20 or Hastelloy wetted parts, open impeller for solids, and API 682 Plan 53B seals.
Q: Do you offer a self‑priming option for low level fluid?
A: No need because these are vertical pumps with the impeller always submerged when installed in the pit/tank. They are not self‑priming in the conventional sense; they are submersible in design (above‑grade motor, below‑grade hydraulics).
Q: What is the minimum recommended submergence above the inducer?
A: With inducer, we recommend at least 0.8‑1.0 m submergence above the inducer eye to prevent vortexing. For standard first stage without inducer, 1.5‑2.0 m is typical.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive references in low‑level pumping for tank farms, terminals, and plants.
Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble‑free operation ≥3 years for low level fluid service with proper installation and maintenance.
Extremely low NPSH – inducers and optimized first stages.
Vertical immersed design – no suction piping, handles liquid levels down to near empty.
Wide model range – VS1 (high flow), VS2 (medium head), VS5 (5 MPa multi‑stage), VS6 (15 MPa double casing).
Unlimited material selection – carbon, alloy, stainless, cryogenic 9%Ni, PTFE‑lined.
Zero emissions – API 682 Plan 53B dual seals.
ATEX/IECEx explosion‑proof options.
China competitive pricing without compromising API 610 quality.
For inquiries, model selection, or technical support, please provide: fluid type, temperature, flow (m³/h), required head (m), minimum liquid level above pump suction (mm), available NPSHa, pressure requirements (MPa), hazardous area classification (if any), and material compatibility considerations. Our low‑level fluid specialists will recommend the optimal API 610 pump (VS1/VS2/VS5/VS6) with inducer, correct materials, and sealing.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.