Are you searching for a China-made API 610 pump suitable for sewage pit applications?
This series includes VS1, VS2, VS5, VS6 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, but engineered for sewage pit and industrial wastewater service. Typical applications include: oily water sumps in refineries and petrochemical plants, chemical plant effluent pits, stormwater collection pits, industrial sewage lift stations, and below‑grade basins containing aggressive, contaminated, or solid‑laden liquids. The fluid may contain sand, rags, oil, acids, alkalis, solvents, volatile organic compounds (VOCs), and explosive gases.
With vertical immersed design (no external suction piping, very low NPSH), optional open impellers to pass solids, corrosion/abrasion resistant materials, API 682 sealing systems, and explosion‑proof motor options, our pumps provide safe, reliable, long‑life (≥30 years) operation in the harshest sewage pit environments.
Full API 610 Compliance – Designed and manufactured per API 610 latest edition for VS1, VS2, VS5, VS6. Passed dynamic balancing, hydrostatic, and optional low‑temperature impact tests. Design life ≥30 years, continuous trouble‑free operation ≥3 years.
Low NPSH & Solids Handling – Vertical immersed design places the first impeller below the minimum pit liquid level, eliminating suction piping losses. Optional inducer or first‑stage oversize impeller reduces NPSHr to <1 m. Open or semi‑open impeller (VS1/VS2) allows passage of solids up to 50‑100 mm diameter. For multi‑stage VS5/VS6, a special first stage with larger clearances is available.
Corrosion & Abrasion Resistance – Wetted parts available in 316L stainless steel (general corrosion), Duplex 2205/2507 (chloride + abrasion), Alloy 20/Hastelloy (aggressive chemicals), or PTFE‑lined carbon steel (wide pH). Impellers and wear plates can be rubber‑lined or hard chrome coated for abrasion from sand/grit.
Wide Model Range – VS1 (diffuser, single‑stage) for large flow (50‑4600 m³/h) at low head (10‑120 m). VS2 (volute, single‑stage) for medium head (30‑300 m) with good anti‑cavitation. VS5 (single‑casing multi‑stage, up to 5 MPa, head up to 1000 m) for high head pumping out of deep pits to distant treatment. VS6 (double‑casing multi‑stage, up to 15 MPa) for ultra‑high head or high pressure injection into deep wells or pressurised lines.
Advanced Sealing for Hazardous / Volatile Sewage – API 682 mechanical seals with Plan 53B (dual pressurized, barrier fluid) to prevent emission of VOCs or H₂S. For less hazardous service, Plan 11+62 (flush + quench) or gland packing is available. Seal faces: silicon carbide vs carbon with FKM/FFKM elastomers.
Explosion Protection – Motors and instrumentation can be supplied with ATEX / IECEx certification (Zone 1 or Zone 2, gas groups IIA, IIB, IIC) for areas where flammable vapors (methane, hydrocarbons) may be present. Pump columns are fully sealed with high‑temperature rated O‑rings.
Vertical Construction – Bearing housing and motor remain above grade, safe from flooding. Column sections are bolted and can be adapted to pit depth. Modular design simplifies installation and maintenance.
Features: Large flow up to 4600 m³/h, low head 10‑120 m, diffuser design for high efficiency. Open impeller option for solids.
Sewage pit applications: Oil/water separator (API separator) pit slop removal, stormwater lift stations, large municipal sewage sumps, chemical plant containment basin transfer.
Commonly searched as: large capacity sump pump / VS1 pit drainage pump.
Features: Flow 20‑1200 m³/h, head 30‑300 m, volute casing yields better performance at medium head. Good solids handling with open impeller.
Sewage pit applications: Deep industrial sumps requiring higher discharge head, refinery oily water collection pits, chemical effluent transfer to treatment units, below‑grade tank pumping.
Searches matched: medium head vertical sump pump / VS2 wastewater transfer pump.
Features: Multi‑stage (single barrel), head up to 1000 m, pressure up to 5 MPa. Equipped with low NPSH first stage.
Sewage pit applications: Pumping sewage from very deep pits (20‑50 m depth) up to ground‑level treatment, long‑distance transfer of industrial wastewater across plant, high head injection into sewer force mains.
Searches matched: multi‑stage high head pit pump / VS5 deep well sewage pump.
Features: Double casing (inner stage casing + outer pressure barrel), head up to 1200+ m, pressure up to 15 MPa. Inducer first stage for low NPSH.
Sewage pit applications: High pressure injection of hazardous wastewater into deep disposal wells, ultra‑high head pumping for very remote treatment facilities, high pressure feed to membrane filtration systems.
Searches matched: double casing high pressure pit pump / VS6 deep well injection pump.
| Model | Flow (m³/h) | Head (m) | Max Temp (°C) | Working Pressure (MPa) | Stages | Solids Passage (typical) |
|---|---|---|---|---|---|---|
| VS1 | 50–4600 | 10–120 | 120 | ≤2.0 | 1 | Up to 100 mm (open imp) |
| VS2 | 20–1200 | 30–300 | 120 | ≤3.0 | 1 | Up to 75 mm |
| VS5 | 10–800* | up to 1000 | 120 | ≤5.0 | 2‑10 | Up to 25 mm (first stage) |
| VS6 | 10–800* | up to 1200+ | 120 | ≤15.0 (higher possible) | 4‑14 | Up to 15 mm |
*Flow range for VS5/VS6: up to 800 m³/h; larger sizes consult.
| Sewage Type | Recommended Materials |
|---|---|
| Oily water, no corrosion | 316L stainless steel |
| Oily water + sand (abrasion) | Hardened 316L + rubber lined impeller or high chrome wear parts |
| Acidic wastewater (pH 2‑5) | Alloy 20, Hastelloy, or PTFE lined |
| Caustic wastewater (pH 10‑13) | 316L or Alloy 20 |
| Saltwater / brine | Duplex 2205/2507 |
| Pulp & paper waste | 316L or 317L |
| Mine dewatering (acidic) | 316L with hard metal or rubber lining |
Sealing: API 682 Plan 53B (dual pressurized) for toxic/volatile; Plan 11+62 for non‑hazardous; optional packed gland with lantern ring flush.
Bearing: High‑load rolling bearings with grease or oil lubrication; cooling jacket optional for hot sewage.
Motor: Standard IP55; explosion‑proof (Ex d or Ex e) for hazardous areas.
Q: Which model is best for very large flow (4000 m³/h) stormwater sump with low head?
A: VS1 diffuser pump – flow up to 4600 m³/h, head 10‑120 m. Use open impeller to pass rags and debris.
Q: Which model can handle abrasive sand in oily water at head 250 m?
A: VS2 with hardened 316L or duplex impeller, rubber‑lined casing, and stellite wear rings. Replaceable wear plates.
Q: I need to pump corrosive chemicals from a deep pit to a treatment unit 500 m away. Which pump?
A: VS5 multi‑stage (head up to 1000 m) with wetted parts in Alloy 20 or Hastelloy. Use dual mechanical seals Plan 53B.
Q: What sealing is recommended to prevent VOC emissions from a refinery oily water pit?
A: API 682 Plan 53B dual pressurized seals with barrier fluid (glycol/water). Barrier pressure > process pressure ensures zero emissions.
Q: Are these pumps suitable for hazardous area (Zone 1, gas group IIB)?
A: Yes. We can supply ATEX/IECEx certified explosion‑proof motors, seal chambers, and temperature monitoring. The pump column is fully sealed.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive references in industrial sewage pit and wastewater applications.
Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble‑free operation ≥3 years for sewage pit service with proper material selection and seal maintenance.
Vertical, immersed – no suction piping, low NPSH.
Solids handling – open impellers for VS1/VS2, large clearances for VS5/VS6.
Corrosion & abrasion resistant – 316L, duplex, alloy, rubber/PTFE lined.
Wide model range – VS1 (high flow), VS2 (medium head), VS5 (high head), VS6 (ultra‑high head/pressure).
Zero emissions – API 682 dual seals with barrier fluid.
ATEX / IECEx approved motors for hazardous areas.
China competitive pricing without compromising API 610 quality.
For inquiries, model selection, or technical support, please provide: sewage composition (oil, chemicals, solids size and concentration), temperature, pH, flow (m³/h), head (m), pit depth, NPSH available, explosive atmosphere classification (Zone, gas group), and any special material requirements. Our wastewater specialists will recommend the optimal API 610 sewage pit pump (VS1/VS2/VS5/VS6) with correct impeller type, materials, and sealing.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.