Are you searching for a China-made API 610 pump suitable for low‑temperature hydrocarbons applications?
This series includes BB2, VS4 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, engineered for cryogenic hydrocarbon liquids with operating temperatures typically between -50°C and -100°C (e.g., liquid ethane -89°C, ethylene -104°C, propane -42°C to -50°C, propylene -48°C, and LNG light fractions). Typical applications include: gas processing plant feed, ethylene crackers, LNG liquefaction and regasification terminals, peak shaving facilities, underground cavern storage extraction, and marine terminal loading/unloading.
With specialized low‑NPSH inducers (VS4), dual pressurized mechanical seals (API 682 Plan 53B) to prevent fugitive emissions of flammable gases, cryogenic‑grade materials (9% nickel steel or 304/316L stainless steel fully impact tested), and heavy‑duty bearings, our pumps provide safe, reliable, long‑life (≥30 years) operation for these demanding low‑temperature services.
Full API 610 Compliance – Designed and manufactured per API 610 latest edition for BB2 and VS4 constructions. Passed strict dynamic balancing, hydrostatic, low‑temperature impact testing (per ASTM E23 at MDMT), and helium leak testing. Design life ≥30 years, continuous trouble‑free operation ≥3 years.
Optimized for Low NPSH at Cryogenic Temperatures – VS4 vertical barrel pump with inducer achieves extremely low NPSH (as low as 0.5‑1.5 m), essential for pumping from underground caverns, low‑level tank sumps, or marine carrier deep wells where liquid submergence is limited. BB2 can be fitted with inducer or oversize first‑stage impeller for moderate low‑NPSH applications.
Moderate & High Pressure Capabilities – BB2 (single‑stage radial split, ≤5.0 MPa, head ≤250 m) for transfer, circulation, and moderate pressure pipeline boosting. VS4 (vertical multi‑stage barrel, up to 15.0 MPa, head up to 1000 m) for high head, low NPSH extraction (caverns, deep sumps) and high‑pressure injection.
Cryogenic Materials – For -50°C to -100°C: 9% nickel steel (ASTM A353/A553) is the standard choice for excellent toughness and strength. Alternatively, 304L/316L stainless steel (fully impact tested to -100°C) can be used for smaller or lower‑pressure pumps. All pressure‑retaining parts Charpy V‑notch tested at minimum design temperature. Bolting, gaskets, and internal components also low‑temp rated.
Advanced Sealing for Volatile Cryogenic Fluids – API 682 dual mechanical seals (pressurized Plan 53B) with inert barrier fluid (e.g., clean methanol, ethanol, or glycol/water mixtures suitable for -100°C). Barrier pressure > process pressure eliminates outward leakage. For ultra‑low temperatures, seal faces: tungsten carbide vs carbon with low‑temperature FFKM elastomers. Optional Plan 52 for less critical duties.
Heavy‑Duty Rotor & Bearings – Rotors dynamically balanced to ISO 1940 G2.5. Bearings: high‑load rolling element or tilting‑pad with forced oil lubrication; cold barrier to minimize heat transfer into pump. Vibration monitoring per API 670. Static grounding brushes to prevent electrostatic ignition of flammable vapors.
Flexible Installation – Horizontal BB2 for above‑grade plants. Vertical VS4 for underground caverns, refrigerated tank pits, or ship/barge deep wells.
Features: Horizontal single‑stage, double‑suction, radial split, centerline mounting – moderate pressure up to 5.0 MPa, head ≤250 m, balanced axial thrust, easy maintenance without removing piping.
Low‑temperature hydrocarbon applications: Liquid ethane/ethylene transfer from refrigerated storage bullets to vaporizers or ethylene crackers; propane/propylene circulation in gas processing plants; pipeline booster for LNG light ends; truck/rail loading of cryogenic liquids.
Commonly searched as: single‑stage cryogenic hydrocarbon pump / BB2 liquid ethylene transfer pump.
Features: Vertical multi‑stage, diffuser design, barrel‑type casing with inducer – extremely low NPSH (0.5‑1.5 m), ideal for deep cavern or sump extraction, head up to 1000 m, working pressure up to 15.0 MPa, immersed installation below liquid level.
Low‑temperature hydrocarbon applications: Underground salt cavern extraction of liquid ethane or ethylene (very low NPSH); refrigerated atmospheric storage tank sump pumping; marine terminal unloading from deep well of LNG/ethylene carriers; high head injection into cryogenic processes (e.g., cracker feed at elevated pressure).
Searches matched: vertical low NPSH cryogenic pump / VS4 cavern extraction pump for hydrocarbons.
| Model | Flow (m³/h) | Head (m) | Temp Range (°C) | Working Pressure (MPa) | Typical Stages |
|---|---|---|---|---|---|
| BB2 | 84–1700 | 65–250 | -100 to -50 | ≤5.0 | 1 |
| VS4 | 10–800* | up to 1000 | -100 to -50 | ≤15.0 (higher on request) | 2‑10 |
*VS4 flow range typical for cryogenic hydrocarbons: up to 800 m³/h depending on size.
| Component | Standard Cryogenic Material | Alternative | Notes |
|---|---|---|---|
| Casing (BB2) | 9% nickel steel (A353/A553) | 304L stainless steel | Impact tested at MDMT |
| Outer barrel (VS4) | Forged 9% Ni steel / 304L | 304L | |
| Inner stage casing | 9% Ni or 304L | 304L | |
| Impeller | 9% Ni or 304L/316L | 316L for purity | Closed impeller |
| Shaft | 17‑4 PH (H1150) – low temp impact tested | 304L | Hardened |
| Wear rings | 17‑4 PH H1150 or stellite | Stellite | Replaceable |
| Bolting | A320 L7 (impact tested) | A193 B8 Class 2 | Low temperature rating |
| Seal | API 682 Plan 53B dual mechanical | Plan 52 | Barrier fluid: clean methanol / glycol |
| Bearing | High‑load rolling, oil mist | Forced oil with cold barrier | |
| Gaskets | Spiral wound graphite/316L | PTFE |
All materials are copper‑free / zinc‑free (to avoid brittle fracture at low temperature and compatibility with hydrocarbons).
For sour low‑temperature hydrocarbons (containing H₂S), NACE MR0175 / ISO 15156 compliant materials with hardness control.
Q: Which API 610 pump model is best for extracting liquid ethane from an underground cavern (NPSHa < 1.5 m)?
A: VS4 vertical barrel pump with inducer – designed for NPSHa as low as 0.5 m, fully immersed in the cavern sump.
Q: Which model is recommended for moderate pressure transfer of liquid ethylene from a refrigerated tank to a vaporizer?
A: BB2 single‑stage radial split pump (up to 5 MPa, head ≤250 m) is ideal. Use larger first‑stage impeller to improve NPSH if needed.
Q: Can BB2 be used for temperatures below -100°C (e.g., LNG at -162°C)?
A: Down to -100°C is within our standard design. For -162°C (LNG), special materials like 9% Ni steel can still work but thermal contraction and sealing become more critical. Please contact us for LNG‑specific designs.
Q: What material is best for -100°C to -50°C?
A: 9% nickel steel (A353/A553) is the industry standard for this range, offering excellent toughness and thermal cycling resistance. 304L stainless steel is also acceptable for smaller sizes and non‑aggressive fluids.
Q: How do you prevent leakage of flammable cryogenic vapors?
A: We provide API 682 dual pressurized mechanical seals (Plan 53B) with barrier fluid that remains liquid at low temperature (methanol or glycol mix). Barrier pressure higher than process ensures any leak goes into process. Leak detection and alarm standard.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive references in cryogenic hydrocarbon pumping for ethylene plants, gas processing, and storage facilities.
Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble‑free operation ≥3 years for low‑temperature hydrocarbon service with proper seal and bearing maintenance.
Cryogenic engineering – 9% Ni steel, fully impact tested to -100°C.
Low NPSH capability – VS4 with inducer for caverns and sumps.
Zero emissions – API 682 Plan 53B dual seals.
High pressure – VS4 up to 15 MPa for high head applications.
Complete range – BB2 (transfer/loading), VS4 (extraction/high head).
China competitive pricing – premium cryogenic materials at affordable cost.
For inquiries, model selection, or technical support, please provide: hydrocarbon composition (ethane, ethylene, propane, mixture), operating temperature (°C), flow (m³/h), differential head (m), suction pressure (min/normal), NPSHa available, required discharge pressure (MPa), installation type (horizontal or vertical cavern/sump), and any special requirements (NACE, explosive environment). Our cryogenic specialists will recommend the optimal API 610 low‑temperature hydrocarbon pump (BB2 or VS4) with correct materials and sealing.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.