Are you searching for a China-made API 610 pump suitable for storage tank fluid applications?
This series includes VS1, VS2, VS5, VS6 models, strictly manufactured according to the latest API 610 (centrifugal pumps for petroleum, petrochemical, and natural gas industries) standard, engineered for pumping liquids from storage tanks (above‑ground and underground), spheres, bullets, underground caverns, and marine terminals. Typical fluids include crude oil, refined products, liquid chemicals, cryogenic fluids (LNG, ethylene, propane), corrosives (acids, caustics), and high‑vapor‑pressure media (LPG, light hydrocarbons). These pumps are vertically suspended with the impeller immersed in the suction liquid, eliminating the need for separate suction piping and providing excellent low‑NPSH performance.
With vertical installation, low NPSH inducers (optional), wide material selection, multi‑stage options for high head, and API 682 sealing systems, our pumps provide safe, reliable, long‑life (≥30 years) operation for tank farm, terminal, and cavern storage applications.
Full API 610 Compliance – Designed and manufactured per API 610 latest edition for VS1, VS2, VS5, and VS6 constructions. Passed strict dynamic balancing, hydrostatic, and low‑temperature impact testing. Design life ≥30 years, continuous trouble‑free operation ≥3 years.
Low NPSH for Tank Suction – All models are vertical immersed pumps (no suction lift). Optional inducer stage on VS1/VS2 and built‑in low NPSH first stage on VS5/VS6 allow operation with extremely low submergence (as low as 0.5‑1.5 m). Ideal for tanks with low liquid levels or when pump is located in a pit/sump.
Wide Model Range – VS1 (vertical single‑case diffuser, single‑stage) for large flow (50‑4600 m³/h) at low head (10‑120 m). VS2 (vertical single‑case volute, single‑stage) for smaller flow (20‑1200 m³/h) with higher head (30‑300 m) and excellent anti‑cavitation. VS5 (vertical single‑case multi‑stage diffuser barrel pump) for heads up to 1000 m and pressure up to 5 MPa. VS6 (vertical double‑casing multi‑stage barrel pump – inner casing within outer barrel) for the highest heads (up to 1500+ m) and pressures up to 15 MPa, suitable for hazardous or high‑pressure fluids.
Material Flexibility – Wetted parts available in: carbon steel (WCB), low‑temp carbon steel (LCB/LCC), 304/316L stainless steel, 9% nickel steel (for -100°C), duplex/super duplex (chloride resistance), Alloy 20, Hastelloy, or PTFE‑lined for corrosives. All materials impact tested to minimum design temperature.
Advanced Sealing – API 682 mechanical seals with Plan 53B (dual pressurized), Plan 52 (unpressurized dual), or Plan 11 + 62. For cryogenic or volatile fluids, dual seals with barrier fluid eliminate fugitive emissions. Seal faces: tungsten carbide vs carbon, or SiC vs SiC.
Vertical Construction – Saves floor space, eliminates suction piping losses, allows direct immersion in tank or pit. Bearing housing and motor are located above grade, isolating them from the stored fluid.
Heavy‑Duty Bearings & Thrust Management – High‑load rolling or tilting‑pad thrust bearings (for VS5/VS6) with oil lubrication. Vibration and temperature monitoring per API 670.
Features: Vertical single‑case, diffuser type, wet pit installation – high hydraulic efficiency, large flow up to 4600 m³/h, head 10‑120 m. Excellent low NPSH performance without inducer in most cases.
Storage tank fluid applications: Crude oil tank farm transfer, refinery slop oil sump, large chemical storage tank transfer, storm water / containment pit pumping, low head high flow applications.
Commonly searched as: large capacity sump pump / VS1 tank transfer pump.
Features: Vertical single‑case, volute type, wet pit installation – good anti‑cavitation, flow 20‑1200 m³/h, head 30‑300 m. Volute design yields better efficiency at medium head.
Storage tank fluid applications: Gasoline, diesel, and kerosene tank farm loading pumps, product transfer from pressurized bullets, high head tank outer circulation, chemical product transfer with variable flow.
Searches matched: medium head vertical pump / VS2 product transfer pump.
Features: Vertical multi‑stage (single casing, diffuser type), head up to 1000 m, working pressure up to 5.0 MPa. Multi‑stage stages built within a single barrel casing. Inducer on first stage for low NPSH.
Storage tank fluid applications: High head pipeline feed from storage tanks, cryogenic ethylene/propylene tank extraction, high pressure chemical transfer, underground cavern high lift pumping.
Searches matched: multi‑stage high head tank pump / VS5 cavern lift pump.
Features: Vertical multi‑stage (inner stage casing inside an outer pressure‑containing barrel), head up to 1500+ m, pressure up to 15 MPa (higher on request). Double casing provides safe containment of hazardous high‑pressure fluids. Inducer first stage for very low NPSH.
Storage tank fluid applications: Underground LPG, ammonia, or ethylene cavern extraction at very high pressure; high head injection into high‑pressure systems from atmospheric storage; LNG terminal high pressure send‑out pumps.
Searches matched: double casing high pressure barrel pump / VS6 cavern high pressure pump.
| Model | Flow (m³/h) | Head (m) | Max Temp (°C) | Working Pressure (MPa) | Stages |
|---|---|---|---|---|---|
| VS1 | 50–4600 | 10–120 | 250 | ≤2.0 | 1 |
| VS2 | 20–1200 | 30–300 | 250 | ≤3.0 | 1 |
| VS5 | 10–800* | up to 1000 | 250 | ≤5.0 | 2‑10 |
| VS6 | 10–800* | up to 1500+ | 250 (cryo lower) | ≤15.0 (higher possible) | 4‑14 |
*Flow range for VS5/VS6 up to 800 m³/h typically; larger sizes possible on request.
| Fluid Type | Recommended Materials |
|---|---|
| Crude oil / refined products (ambient) | Carbon steel WCB / LCB |
| High temperature (>200°C) | Cr‑Mo steel (WC6) |
| Cryogenic (down to -100°C) | 9% nickel steel or 304L |
| LPG, ethylene, propylene | LCB/LCC or 304L |
| Corrosive acids / caustics | Alloy 20, Hastelloy, PTFE lined |
| Seawater / brine | Duplex 2205/2507 |
| High purity chemicals | 316L or 304L |
Shaft: AISI 4140/4340 (carbon steel), 17‑4 PH, or duplex.
Seal: API 682 with barrier fluid (Plan 53B preferred for volatile or hazardous fluids).
Bearing: Rolling element or tilt‑pad thrust bearing for VS5/VS6.
Q: Which model is best for extracting LPG from an underground cavern (low NPSH, high pressure)?
A: VS6 double‑casing barrel pump with inducer – provides very low NPSH (0.5‑1.5 m) and discharge pressure up to 15 MPa.
Q: Which model is suitable for large flow crude oil transfer from a tank farm (4000 m³/h, 50 m head)?
A: VS1 diffuser type – flow up to 4600 m³/h, head up to 120 m. Low NPSH, high efficiency.
Q: Can VS2 be used for diesel loading (head 200 m, flow 600 m³/h)?
A: Yes, VS2 volute pump offers head 30‑300 m, good anti‑cavitation, ideal for medium head product transfer.
Q: What is the advantage of VS6 over VS5?
A: VS6 has an outer pressure‑containing barrel (double casing), which allows much higher working pressures (15 MPa vs 5 MPa) and safer containment of hazardous fluids. VS5 is single‑casing and lower cost for moderate pressures.
Q: How do you prevent leakage from the seal when pumping volatile fluids?
A: We use API 682 Plan 53B dual pressurized mechanical seals with barrier fluid (glycol/water). Barrier pressure > process pressure ensures any leakage goes from barrier into process. Leak detection provided.
Q: Are these pumps made in China?
A: Yes, we are a Chinese manufacturer certified to API 610, with extensive references in tank storage and terminal applications.
Q: What is the design life and MTBF?
A: Design life ≥30 years, continuous trouble‑free operation ≥3 years for storage tank service with proper maintenance.
Vertical, immersed design – no suction piping, low NPSH.
Complete coverage – VS1 (high flow), VS2 (medium head), VS5 (high head, 5 MPa), VS6 (ultra‑high head, 15 MPa).
Wide materials – carbon, stainless, 9%Ni, duplex, alloy, lined.
Zero emissions – dual seals with barrier fluid.
China competitive pricing without compromising API 610 quality.
For inquiries, model selection, or technical support, please provide: fluid type, operating temperature, flow (m³/h), head (m), required discharge pressure (MPa), tank type (above‑ground, underground cavern, bullet), NPSH available, and any special material/seal requirements. Our tank pump specialists will recommend the optimal API 610 pump (VS1/VS2/VS5/VS6) with correct stage count, material, and sealing.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.