Automatic Vertical Drilling System | Anti-Deviation Tool

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the automatic vertical drilling system and its spare parts. This fully rotating push-the-bit tool is designed to prevent well deviation in complex geological conditions, ensuring the wellbore remains vertical while maintaining high drilling speed.
Conatct For Details
DetailReview(0)Additional

Automatic Vertical Drilling System | Anti-Deviation Tool

Overview:

HYRIG can supply the automatic vertical drilling system and its spare parts. This fully rotating push-the-bit tool is designed to prevent well deviation in complex geological conditions, ensuring the wellbore remains vertical while maintaining high drilling speed.

Dimensions (Text-Based)

Dimension ItemSpecification
ModulesPower, Measurement, Control, Actuator
Upper ConnectionMWD sub
Lower ConnectionDrill bit

Structure / Working Principle

The system consists of four modules: power, measurement, control, and actuator. It uses autonomous guidance technology to monitor and correct the wellbore trajectory in real-time. The fully rotating design improves hole cleaning and wellbore quality. It transmits data to the MWD system for real-time monitoring.

Cross-Reference & Replacement

When selecting an automatic vertical drilling system, verify the hole size, mud flow rate, and WOB requirements. The tool is compatible with standard MWD systems and drill bits.

Selection Support

Need help with vertical drilling in complex formations? Tell us your hole size and geological conditions, and our engineers will assist. For directional drilling, view our Reamer While Drilling.

Applications

Used in high-steep structures, fault zones, and salt layers to prevent well deviation and improve drilling efficiency.

Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.

Spare Parts

We supply replacement parts including actuator pads, control boards, and sensors. Please visit our Downhole Tools page.

Specifications:

  • Tool O.D.: 9 1/2", 12 1/4", 17 1/2"
  • Rotational Speed: 60 - 200 r/min
  • Flow Range: 20 - 55 l/s
  • Control Hole Angle: ≤ 1.0°
  • Max WOB: 300 kN
  • Connection: NC50 or 6 5/8" REG
  • Product: Automatic Vertical Drilling System
  • Tool O.D.: 9 1/2", 12 1/4", 17 1/2"
  • Rotational Speed: 60 - 200 r/min
  • Control Hole Angle: ≤ 1.0°

FAQ:

  • 1. Does the tool rotate with the drill string? Yes, it is a fully rotating system, which improves hole cleaning and reduces stick-slip.
  • 2. Can it be used with a PDC bit? Yes, it is compatible with various drill bit types, including PDC bits.

Contact Us:

For automatic vertical drilling system selection and spare parts, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit