Reamer While Drilling | RWD & CRWD Hydraulic Tools
Overview:
HYRIG can supply the reamer while drilling series and their spare parts. This range includes the RWD (Hydraulic Reamer While Drilling) and CRWD (Circulation Type Reamer While Drilling). These tools are designed to enlarge the wellbore while drilling, solving issues like salt layer creep and slim hole problems.
The tool O.D. is determined by the reaming range. The connection threads are typically NC38, NC46, or NC50, depending on the tool size. The blade design is optimized for wear resistance and reaming efficiency.
The RWD uses a hydraulic piston to push the blades out along an inclined slot when a ball is dropped. The CRWD uses a circulation mechanism to activate and deactivate the blades multiple times. After reaming, the pilot bit can continue drilling normally, and the tool can be tripped out with full circulation.
Selecting the correct reamer requires knowing your pilot hole size and the desired final hole size.
Tell us your drilling program, and our engineers will assist.
Used in drilling operations to enlarge the wellbore, improve casing clearance, and enhance cementing quality. Suitable for offshore, extended reach, and horizontal wells.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including blades, hydraulic cylinders, and seal kits. Please visit our Downhole Tools page.
Specifications:
FAQ:
Contact Us:
For reamer while drilling selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.