The OH2 Ballast Pump is a heavy duty, API 610 (ISO 13709) Type OH2 horizontal overhung centrifugal pump specifically engineered for ballast water handling in marine vessels, offshore platforms, FPSO units, shipyards, and industrial balance systems. It reliably transfers seawater for ballasting and deballasting operations, maintaining vessel stability, trim, and structural integrity during cargo loading, unloading, and transit.
Key Performance Parameters (Typical for Ballast Service)
Flow range: 50 – 3,000 m³/h (customizable based on vessel size and ballasting rate)
Head range: Up to 120 m (approximately 400 ft)
Speed: 1,450/1,750 RPM or 2,950/3,550 RPM
Power range: 15 – 800 kW (varies with flow, head, and pump configuration)
Process Compatibility (Ballast Water Service)
Temperature range: -10°C to 80°C (14°F to 176°F) – suitable for seawater and ballast water applications.
Design pressure: Up to 16 bar (232 psi) – compatible with typical ballast system pressures.
Media handled: Seawater, brackish water, ballast water, fresh water, and treated ballast water (with potential trace biocides from treatment systems).
Wetted materials: Carbon steel with coating – standard for general service; duplex stainless steel (S‑8) or super duplex for superior corrosion resistance in seawater; copper‑nickel alloy (CuNi) for marine environments.
Reliability & Efficiency
Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 11 (internal recirculation) or Plan 21 (cooling). For seawater service, Plan 32 (external flush with clean water) or Plan 53 (double seal with barrier fluid) recommended to prevent salt crystallization and seal face damage.
Hydraulic efficiency: ≥78% at best efficiency point (BEP)
NPSHr: Low NPSH design – critical for ballast pumps operating with limited suction head from sea chests or ballast tanks.
MTBF: ≥8000 hours – supports continuous operation during cargo handling and voyage cycles.
Mechanical Design (API 610 OH2 Features for Ballast Service)
Configuration: Single stage, overhung, horizontal, foot mounted (standard) or centerline mounted (for higher temperatures), radially split casing.
Inlet/Outlet: Suction 6″–24″, discharge 4″–18″ (customizable based on flow requirements; large flanged connections for high flow capability).
Flange rating: Class 150 RF (ANSI/ASME) or PN 10/16 (DIN/EN).
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.
Rotor support: Rigid shaft with minimal deflection – extends mechanical seal and bearing life in high‑flow seawater applications.
Bearing housing: Fan cooled (standard); water cooling optional for extended operation.
Seal chamber: API 682 compliant, sized for cartridge mechanical seals; large bore recommended for Plan 32 or Plan 53 installations.
Maintenance: Back pull‑out design – pump internals removable without disturbing suction/discharge piping or driver.
Impeller: Closed radial, dynamically balanced, with renewable wear rings (hard coated options for erosion resistance in sand‑laden seawater).
Casing: Radially split, self‑venting design with discharge flange positioned upward; heavy wall construction for pressure containment.
Why Choose This OH2 Ballast Pump?
For ballast water handling in demanding marine and offshore environments, the OH2 pump delivers exceptional reliability, high flow capability, and API 610 heavy duty construction. Its corrosion‑resistant material options (duplex, super duplex, CuNi), low NPSHr, and robust sealing for seawater service make it the ideal choice for safe and efficient ballasting and deballasting operations.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, vessel type (tanker / bulk carrier / FPSO / offshore platform), seawater temperature, and any specific material requirements for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.