Deethanizer Reflux Pump BB2

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The BB2 deethanizer reflux pump is an API 610 Type BB2 horizontal, radially split, between‑bearings centrifugal pump designed for deethanizer tower overhead condensate reflux service in NGL recovery, ethylene plants, and refineries. Flow range 50-800 m³/h, head up to 250 m, temperature range -60°C to 120°C, design pressure up to 40 bar. Wetted parts in carbon steel, 316SS, or duplex. Mechanical seal with API flush plans (double seal recommended). Hydraulic efficiency ≥75%, MTBF ≥8000 hours. Reliable for precise reflux control to maximize ethane/propane recovery.

Conatct For Details
DetailReview(0)Additional

The BB2 Deethanizer Reflux Pump is a heavy duty, API 610 (ISO 13709) Type BB2 horizontal, radially split, between‑bearings centrifugal pump specifically engineered for deethanizer tower overhead condensate reflux service in natural gas liquid (NGL) recovery plants, ethylene crackers, and refinery light ends units. It precisely returns condensed overhead liquid (primarily ethane and propane) to the top of the deethanizer column, maintaining the vapor‑liquid equilibrium required to achieve high recovery of light hydrocarbons.

Key Performance Parameters (Typical for Deethanizer Reflux Service)

  • Flow range: 50 – 800 m³/h (customizable based on tower capacity)

  • Head range: Up to 250 m (approximately 820 ft)

  • Number of stages: 1 to 3 stages (depending on head requirement)

  • Speed: 1,450/1,750 RPM or 2,950/3,550 RPM

  • Power range: 30 – 450 kW (varies with flow, head, and media density)

Process Compatibility (Deethanizer Reflux Service)

  • Temperature range: -60°C to 120°C (-76°F to 248°F) – suitable for cryogenic ethane/propane condensate to moderate temperature excursions.

  • Design pressure: Up to 40 bar (580 psi) – compatible with typical deethanizer operating pressures.

  • Media handled: Ethane, propane, mixed C2/C3 hydrocarbons, light ends, and hydrocarbon condensate.

  • Wetted materials: Carbon steel (C‑6) – standard for dry service; 316 stainless steel (S‑6) for higher corrosion resistance or wet gas service; duplex (S‑8) for sour or chloride‑containing service.

Reliability & Efficiency

  • Sealing system: Mechanical seal (double or tandem cartridge) with API flush plans – double seal (Plan 52/53) strongly recommended for volatile hydrocarbon service to prevent fugitive emissions. Plan 11/21 for single seal in less critical applications.

  • Hydraulic efficiency: ≥75% at best efficiency point (BEP) – BB2 design provides excellent efficiency at moderate to high heads.

  • NPSHr: Low NPSH characteristics – critical for reflux service where suction is from an accumulator with limited head.

  • MTBF: ≥8000 hours – supports continuous 24/7 plant operation.

Mechanical Design (API 610 BB2 Features for Deethanizer Reflux)

  • Configuration: Single stage or multistage, horizontal, radially split (barrel or segmental ring), between‑bearings casing – heavy wall construction for pressure containment and rotor stability.

  • Inlet/Outlet: Suction and discharge flanges on the casing – typically top‑top or side‑side orientation.

  • Flange rating: Class 150, 300, or 600 RF (ANSI/ASME) – based on design pressure.

  • Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.

  • Rotor: Single or multiple closed impellers mounted on a shaft supported by bearings at both ends. Impellers may be arranged back‑to‑back for axial thrust balance. Dynamically balanced to ISO 1940 Grade G2.5.

  • Shaft: Large diameter, rigid shaft with minimal deflection – essential for hydrocarbon service.

  • Bearings: Heavy duty rolling element bearings or hydrodynamic tilting pad bearings; oil lubrication (splash or forced) with optional cooling.

  • Seal chamber: API 682 compliant, sized for cartridge mechanical seals (large bore recommended for Plan 53).

  • Maintenance: Radial split design – end cover removal allows rotor access; the entire rotating assembly can be withdrawn axially for overhaul without disturbing major piping.

  • Wear rings: Renewable hardened wear rings on impellers and casing to maintain hydraulic efficiency.

Why Choose This BB2 Deethanizer Reflux Pump?

For deethanizer reflux service requiring high flow, moderate to high head, and exceptional reliability, the BB2 pump delivers outstanding performance. Its API 610 between‑bearings construction, low NPSHr, and flexible multistage design make it the preferred choice for maximizing ethane/propane recovery and ensuring stable deethanizer operation in cryogenic NGL plants and ethylene units.

Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, operating temperature, and fluid composition (C2/C3 ratio) for a precise recommendation.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit