The BB2 Depropanizer Pump is a heavy duty, API 610 (ISO 13709) Type BB2 horizontal, radially split, between‑bearings centrifugal pump specifically engineered for depropanizer tower service in natural gas liquid (NGL) fractionation plants, refinery LPG units, and petrochemical facilities. It reliably handles C3/C4 hydrocarbon streams – including overhead reflux, condensate return, and bottoms transfer – ensuring efficient separation of propane (C3) from butane (C4) and heavier components.
Key Performance Parameters (Typical for Depropanizer Service)
Flow range: 20 – 600 m³/h (customizable based on tower capacity)
Head range: Up to 300 m (approximately 980 ft)
Number of stages: 1 to 3 stages (depending on head requirement)
Speed: 1,450/1,750 RPM or 2,950/3,550 RPM
Power range: 11 – 350 kW (varies with flow, head, and fluid density)
Process Compatibility (Depropanizer Service)
Temperature range: -40°C to 120°C (-40°F to 248°F) – suitable for cold overhead condensate to warm bottoms liquid.
Design pressure: Up to 35 bar (507 psi) – compatible with typical depropanizer operating pressures (10–25 bar).
Media handled: Propane, propylene, propane/propylene mixtures (C3), butane (C4), mixed C3/C4 streams, LPG.
Wetted materials: Carbon steel (C‑6) – standard for dry C3/C4 service; 316 stainless steel (S‑6) for higher corrosion resistance or trace H₂O/H₂S; duplex (S‑8) for sour service.
Reliability & Efficiency
Sealing system: Mechanical seal (double or tandem cartridge) with API flush plans – double seal (Plan 52/53) strongly recommended for volatile hydrocarbon service to prevent fugitive emissions. Plan 11 or 21 for single seal in less critical applications.
Hydraulic efficiency: ≥72% at best efficiency point (BEP)
NPSHr: Low NPSH design – critical for reflux service where suction may be from an accumulator with limited head.
MTBF: ≥8000 hours – supports continuous 24/7 fractionation operation.
Mechanical Design (API 610 BB2 Features for Depropanizer Service)
Configuration: Single stage or multistage, horizontal, radially split (barrel or segmental ring), between‑bearings casing – heavy wall construction for pressure containment and rotor stability.
Inlet/Outlet: Suction and discharge flanges on the casing – typically top‑top or side‑side orientation.
Flange rating: Class 150, 300, or 600 RF (ANSI/ASME) – based on design pressure.
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.
Rotor: Single or multiple closed impellers mounted on a shaft supported by bearings at both ends. Impellers may be arranged back‑to‑back for axial thrust balance. Dynamically balanced to ISO 1940 Grade G2.5.
Shaft: Large diameter, rigid shaft with minimal deflection – essential for hydrocarbon service.
Bearings: Heavy duty rolling element bearings or hydrodynamic tilting pad bearings; oil lubrication (splash or forced) with optional cooling.
Seal chamber: API 682 compliant, sized for cartridge mechanical seals (large bore recommended for Plan 53).
Maintenance: Radial split design – end cover removal allows rotor access; the entire rotating assembly can be withdrawn axially for overhaul without disturbing major piping.
Wear rings: Renewable hardened wear rings on impellers and casing to maintain hydraulic efficiency.
Why Choose This BB2 Depropanizer Pump?
For depropanizer reflux, overhead, or bottoms service in C3/C4 fractionation, the BB2 pump delivers exceptional reliability, high hydraulic efficiency, and robust hydrocarbon sealing. Its API 610 between‑bearings construction, low NPSHr, and flexible multistage design make it the preferred choice for maximizing propane recovery and ensuring stable depropanizer operation.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, service type (reflux / bottoms / transfer), operating temperature, and fluid composition (C3/C4 ratio) for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.