BB2-80/50-200 Condensate Transfer Pump – Iran Market Edition, Direct Replacement for Sulzer BBS 32-2

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
BB2-80/50-200 Condensate Transfer Pump is an API 610 BB2 single-stage double-suction radially split centrifugal pump, purpose-engineered for Iran’s gas fields, offshore platforms, and refineries to handle challenging condensate with high vapor pressure, H₂S content (up to 1000 ppm), trace sand, and high chlorides. It serves as a 100% interchangeable replacement for Sulzer BBS 32-200, featuring wide temperature range -20°C to +180°C, optional C-6 duplex stainless steel for chloride resistance, Plan21+52 tandem seal for near-zero leakage, NACE MR0175 anti-sulfide certification, and 50Hz/380-400V motor for Iran grid – delivering reliable long-term condensate transfer under harsh Iranian conditions.

Conatct For Details
DetailReview(0)Additional

BB2-80/50-200 Condensate Transfer Pump – Iran Market Edition

Direct Replacement for Sulzer BBS 32-200 | API 610 BB2

Product Overview

The BB2-80/50-200 is an API 610 BB2 single-stage, double-suction, radially split between-bearing centrifugal pump, engineered by HYRIG specifically for condensate transfer in Iran’s gas fields, offshore platforms, refineries, and petrochemical plants. It serves as a high-performance, 100% interchangeable domestic alternative to the Sulzer BBS 32-200, eliminating reliance on expensive imports and long lead times.

Designed for Iran’s 50Hz power grid (380V/400V) and fully compliant with NIOC/POGC safety standards, this pump addresses the unique challenges of Iranian condensate: high vapor pressure (easy cavitation), H₂S content (typically 500–1000 ppm, sour service), trace sand particles, and high chloride levels (especially on offshore platforms). With a wide temperature range from -20°C to +180°C, flexible seal configurations, and upgraded corrosion-resistant materials (including optional C-6 duplex stainless steel), the BB2-80/50-200 delivers safe, reliable, long-term condensate transfer under Iran’s most demanding conditions.


Key Specifications (Iran‑Specific Configuration)

ParameterValueAdvantage over Sulzer BBS 32-200
ModelBB2-80/50-200API 610 compliant; performance curve overlap ≥95% – seamless replacement
TypeAPI 610 BB2, double‑suction, radially splitHeavy-duty casing withstands 2× API nozzle loads – ideal for severe Iranian service
Inlet/Outlet80×50 mmSame as BBS 32-200 – direct fit to existing gas field & refinery piping
Flow Range50 – 150 m³/hCovers full BBS operating window – gathering, boosting, transfer
Head Range20 – 110 mMeets short-distance condensate transfer pressure requirements
Design Pressure40 barCompliant with Iran’s high-pressure hazardous fluid codes
Temperature Range-20°C to +180°C60°C higher than BBS – handles hot desulfurized condensate
NPSH required≤ 4.0 mBelow industry average – prevents cavitation from high vapor pressure
Motor50Hz, 380V/400V (IEC standard)Direct Iran grid connection – no transformer needed
ComplianceAPI 610, API 682, NACE MR0175Mandatory for NIOC/POGC projects; international anti‑sulfide certification
Standard CasingS‑6 carbon steel + anti‑corrosion coatingResists Iran’s high‑salt, dusty environment (Persian Gulf coast)
Standard Wetted Parts316L stainless steelSuitable for sour condensate (H₂S)
Optional MaterialC-6 duplex stainless steelCustom for offshore high‑chloride condensate – prevents pitting corrosion
Standard SealPlan11 single cartridgeReliable for general condensate service
Optional SealPlan21+52 tandem sealNear‑zero leakage (≤10 ppm) – for volatile, flammable H₂S service
Hydraulic Efficiency≥ 76%Energy‑saving for 24/7 gas field operation

Condensate Service Adaptation – Why This Pump is Built for Iran

Iranian gas condensate (C5–C12 light hydrocarbons) presents multiple challenges:

  • Low viscosity (0.5–1.2 mPa·s at 20°C) and high vapor pressure → high cavitation risk

  • H₂S content (500–1000 ppm in many South Pars and West Karoun fields) → sulfide stress corrosion (SSC)

  • Trace sand particles in some fields → mild abrasion

  • High chlorides (offshore platforms) → pitting corrosion

The BB2-80/50-200 directly addresses each challenge:

  • Low NPSHr ≤4.0m and double‑suction impeller → minimizes cavitation

  • NACE MR0175 certified materials (316L or duplex) → resists SSC

  • Flow path optimization & wear-resistant impeller options → handles trace sand

  • Optional C-6 duplex stainless steel → excellent chloride pitting resistance for offshore


Core Advantages & Replacement Value (vs. Sulzer BBS 32-200)

1. Wider Operating Envelope – Covers More Iranian Scenarios

  • Temperature range -20°C to +180°C – 60°C higher than BBS. Handles both low‑temperature condensate gathering (e.g., winter in West Karoun) and high‑temperature desulfurized condensate (refinery feed) with the same pump.

  • Flexible material upgrade – Optional C-6 duplex stainless steel wetted parts provide exceptional resistance to chloride pitting, specifically engineered for Iran’s offshore platforms (South Pars) and high‑salinity coastal environments.

  • Abrasion consideration – Optimized flow passages and optional hardened impeller extend life when handling trace sand particles present in some Iranian gas fields.

2. Safety & Compliance – No Compromise for Iranian HSE Requirements

  • NACE MR0175 certified – Full resistance to sulfide stress corrosion (SSC) from H₂S‑laden condensate. Essential for Iran’s sour gas fields.

  • Advanced sealing – Optional Plan21+52 tandem seal with nitrogen buffer provides near‑zero leakage (≤10 ppm), specifically designed for volatile, flammable, and toxic H₂S service. Complies with Iran’s strict hazardous medium regulations.

  • Explosion protection – Ex d IIB T4 certified for hazardous zones in Iranian refineries and gas processing plants.

3. True Drop‑in Replacement – Minimal Downtime

  • Identical mounting dimensions (center height, flange positions, foundation bolt pattern) to Sulzer BBS 32-200 – no piping, baseplate, or motor modification required.

  • Performance curve overlap ≥95% – no process re‑engineering needed. Switch during a scheduled turnaround.

4. Lower Total Cost of Ownership – Built for Iran’s Operating Budgets

  • Procurement cost 30% lower than original Sulzer BBS 32-200.

  • Lead time ≤50 days (vs. 120+ days for imports).

  • Radially split casing allows internal inspection and rotor removal without disturbing piping – reduces maintenance time and cost, especially critical for remote Iranian fields and offshore platforms.

  • Middle East spare parts warehouse – emergency parts response ≤72 hours; normal spare parts supply ≤15 days.

5. Proven Track Record in Iran & Similar Harsh Environments

  • Domestic references: Over 30,000 trouble‑free operating hours in CNPC and Sinopec gas field condensate services.

  • Iran reference: Successfully installed at a West Iranian oil field condensate separator outlet pump station. Operates continuously on 50Hz grid for over 2 years, handling sour condensate with trace sand. Highly praised by the end user.

  • Bilingual documentation (English & Farsi/Persian) – includes ISIRI compliance reports and Iran project references. Smooth customs clearance and owner approval.


Typical Applications in Iran

ApplicationSpecific Role
Gas field condensate gatheringWest Karoun, Central Iranian gas fields – wellhead gathering, separator outlet boosting. Handles low‑temperature, sour, trace‑sand condensate.
Offshore platform condensate transferSouth Pars offshore platforms – condensate transfer to onshore. Optional C-6 duplex stainless steel resists high chloride corrosion.
Refinery condensate processingNIOC refineries & petrochemical complexes – desulfurized condensate transfer (up to 180°C), catalytic reformer feed.
Medium‑distance pipeline transferFrom gas fields to refineries – efficient, stable, reliable under Iranian infrastructure conditions.

Compliance & Certifications

  • API 610 (ISO 13709) – design and manufacturing

  • API 682 – mechanical seal standards

  • NACE MR0175 / ISO 15156 – sulfide stress corrosion cracking resistance

  • ISO 9001 – quality management system

  • ISIRI – meets Iran Standard & Industrial Research Institute requirements (smooth customs clearance)

  • Explosion protection: Ex d IIB T4 – suitable for Iran’s hazardous petrochemical zones

  • Grid compatibility: 50Hz motor, 380V/400V voltage options – direct connection without transformer


After-Sales & Technical Support for Iran

  • 7×24 technical support – via Middle East partner service center

  • Fault response ≤72 hours – on‑site or remote

  • Spare parts supply ≤15 days for common wear parts

  • Full documentation package – English/Persian manuals, inspection reports, certificate of origin, ISIRI clearance documents


About HYRIG – Your Complete Centrifugal Pump Partner

HYRIG supplies a full range of API 610 centrifugal pumps for the oil, gas, petrochemical, and refinery industries:

  • OH2 – overhung, centerline mounted

  • BB2 – between‑bearing, radially split, single‑stage

  • BB5 – between‑bearing, barrel type, multi‑stage high pressure

  • VS6 – vertical suspended, double‑casing

We also offer complete Sulzer series replacements, including:

  • Sulzer BBS (BB2 equivalent)

  • Sulzer OHH (OH2 equivalent)

  • Sulzer GSG (multistage ring section)

  • Sulzer ZE (heavy‑duty process pump)

For inquiries, technical support, sizing, or a quotation, please contact us:

info@hyrig.com

HYRIG – Reliable, grid‑ready, and code‑compliant pumping solutions for Iran’s oil, gas, and petrochemical industry.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit