HS-BB2-32-200 Diesel Transfer Pump – Iran Market Edition, Direct Replacement for Sulzer BBS 32-200

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HS-BB2-32-200 Diesel Transfer Pump is an API 610 BB2 single-stage double-suction radially split centrifugal pump, purpose-built for Iranian refineries and tank farms to handle clean low-viscosity diesel with 50Hz/380V grid compatibility, featuring 1:1 dimensional interchangeability with Sulzer BBS 32-200, efficiency ≥78% (3-5% higher than OEM), API 682 Plan11 seal with ≤5 ppm leakage, NACE MR0175 anti-sulfide certification, and 40% lower procurement cost – delivering energy-saving, safe, and long-term diesel transfer.

Conatct For Details
DetailReview(0)Additional

HS-BB2-32-200 Diesel Transfer Pump – Iran Market Edition

Direct Replacement for Sulzer BBS 32-200 | API 610 BB2

Product Overview

The HS-BB2-32-200 is an API 610 BB2 single-stage, double-suction, radially split between-bearing centrifugal pump, engineered by HYRIG specifically for diesel transfer in Iran’s refineries, tank farms, and oil product storage & distribution facilities. It serves as a high‑value, 100% interchangeable domestic alternative to the Sulzer BBS 32-200, offering identical dimensions, superior hydraulic efficiency, and significant cost savings.

Designed for Iran’s 50Hz power grid (380V) and fully compliant with NIOC/POGC safety standards, this pump addresses the core characteristics of diesel: clean, low viscosity (2–8 mPa·s at 20°C), flammable (flash point 55–90°C), medium-temperature service (40–120°C), and ultra‑low sulfur content (≤10 ppm, with trace H₂S in some streams). With 1:1 dimensional interchangeability, API 682 sealing, NACE MR0175 anti‑sulfide materials, and efficiency ≥78% (3‑5% higher than Sulzer), the HS-BB2-32-200 delivers energy‑saving, safe, reliable, and low‑maintenance diesel transfer – ideal for Iran’s high‑volume refinery product transfer and tank farm loading/unloading applications.


Diesel Service Adaptation – Why This Pump is Built for Iran

Iranian diesel (C10–C22 hydrocarbon mixture) presents specific requirements:

  • Clean, low viscosity – no solids, easy to pump, but demands high efficiency for large volumes

  • Flammable (flash point 55–90°C) – requires reliable sealing to prevent leakage

  • Medium temperature (40–120°C) – typical of refinery product streams

  • Ultra‑low sulfur (≤10 ppm) – minimal but trace H₂S possible in some streams

  • Continuous, high‑flow operation – refineries and tank farms operate 24/7

The HS-BB2-32-200 is optimized accordingly:

  • High‑efficiency hydraulic design (≥78%) – handles large‑flow continuous transfer with minimum energy cost

  • API 682 Plan11 seal – leakage ≤5 ppm, safe for flammable service

  • Temperature range -20°C to +120°C – covers all diesel handling conditions

  • 316L stainless steel wetted parts (standard) – resists trace H₂S and coastal corrosion

  • Low NPSHr ≤4.0m – avoids cavitation during high‑flow operation


Key Specifications (Iran‑Specific Configuration)

ParameterValueAdvantage over Sulzer BBS 32-200
ModelHS-BB2-32-200Identical model number – designed for replacement; performance curve overlap ≥98%
TypeAPI 610 BB2, double‑suction, radially splitCompliant with API 610 11th/12th edition; high pressure capacity
Inlet/Outlet80×50 mmSame as BBS 32-200 – direct fit to existing Iranian refinery piping
Flow Range50 – 150 m³/hFull BBS flow coverage – tank truck loading, refinery transfer
Head Range20 – 110 mMatches short‑distance diesel pressure requirements
Design Pressure40 barMeets Iran’s high‑pressure hazardous fluid codes
Temperature Range-20°C to +120°CCovers all diesel handling temperatures (including mildly heated)
NPSH required≤ 4.0 mBelow industry average – prevents cavitation, ensures continuous operation
Motor50Hz, 380V (IEC standard)Direct Iran grid connection – no VFD or transformer needed
ComplianceAPI 610, API 682, NACE MR0175Mandatory for NIOC/POGC projects; international anti‑sulfide certification
Standard CasingS‑6 carbon steel + anti‑corrosion coatingResists Iran’s high‑salt, dusty outdoor environment
Standard Wetted Parts316L stainless steelSuitable for diesel with trace H₂S; corrosion‑resistant
Mechanical SealPlan11 single cartridge (API 682 Cat 2)Optimized for clean diesel; leakage ≤5 ppm – meets Iran’s flammable fluid safety rules
Hydraulic Efficiency≥ 78%3‑5% higher than Sulzer – significant energy savings

Core Advantages & Replacement Value (vs. Sulzer BBS 32-200)

1. 100% Interchangeable – Zero‑Downtime Replacement

  • Identical mounting dimensions (center height, flange position, foundation bolt pattern) – 1:1 replica of Sulzer BBS 32-200.

  • No piping, baseplate, or motor modification required – replacement can be completed within 8 hours (including alignment and testing).

  • Performance curve overlap ≥98% – no process parameter adjustment needed. Switch during a scheduled turnaround or emergency replacement with immediate production resumption.

2. Higher Efficiency – Significant Energy Savings for Iran’s Continuous Operation

  • Hydraulic efficiency ≥78% – 3‑5% higher than Sulzer BBS 32-200.

  • Annual energy saving example: For a typical Iranian refinery operating 24 hours/day, 330 days/year, the efficiency improvement saves approximately $4,000–7,000 USD per year in electricity costs (depending on local tariff). Over 10 years, the savings exceed the pump purchase price.

  • Optimized double‑suction impeller – reduces axial thrust and bearing load, further improving long‑term efficiency.

3. Lower Total Cost of Ownership – Built for Iran’s Budget‑Conscious Projects

  • Procurement cost 40% lower than original Sulzer BBS 32-200.

  • Lead time ≤45 days (vs. 120+ days for imports) – supports fast‑track Iranian EPC schedules.

  • Radially split casing – allows internal inspection and rotor removal without disturbing piping. Reduces maintenance downtime and local labor costs.

  • Middle East spare parts warehouse – emergency parts response ≤72 hours; standard spare parts supply ≤15 days. Spare part costs are 40% lower than OEM equivalents.

4. Safety & Compliance – Fully Certified for Iranian Hazardous Areas

  • NACE MR0175 certified – resists sulfide stress corrosion from trace H₂S in diesel streams.

  • Explosion protection – Ex d IIB T4 certified for Zone 1/2 hazardous areas in Iranian refineries and tank farms.

  • API 682 Plan11 seal – single cartridge, leakage ≤5 ppm. Tested for flammable diesel service.

  • Heavy‑duty external coating – withstands Iran’s high temperature (>40°C), high humidity (Persian Gulf coast), dust storms, and UV exposure. Outdoor service life ≥8 years.

5. Proven Track Record in Iran & Similar Harsh Environments

  • Domestic references: Over 50 units in Chinese refineries (Sinopec, CNPC) diesel transfer service – average 3+ years trouble‑free operation.

  • Iran reference: Successfully installed at a Persian Gulf coastal refinery diesel tank farm loading/unloading pump station. Handles ultra‑low sulfur diesel (10 ppm) with trace H₂S. Continuous operation on 50Hz grid for over 2 years – zero seal leakage, no cavitation, no bearing failure. Highly recommended by the end user.

  • Bilingual documentation (English & Farsi/Persian) – includes ISIRI compliance reports, Iran project reference letters. Smooth customs clearance and owner approval.


Typical Applications in Iran

ApplicationSpecific Role
Refinery product diesel transferAhwaz Refinery, Tehran Petrochemical Complex, Bandar Abbas Refinery – diesel from process units to storage tanks, or tanks to truck/rail loading racks. High flow, continuous duty.
Tank farm loading/unloadingPersian Gulf coastal terminals, inland depots – ship unloading, tank truck loading. High efficiency, reliable sealing to prevent environmental contamination.
Refinery process diesel circulationFCC units, hydrotreaters – process diesel circulation at medium temperature (up to 120°C) with trace H₂S. Stable, trouble‑free operation.
Medium‑distance pipeline transferFrom refineries to end users (fuel stations, industrial plants) – energy‑efficient boosting for short to medium distances.

Compliance & Certifications

  • API 610 (ISO 13709) 11th/12th Edition – design and manufacturing

  • API 682 (ISO 21049) – mechanical seal standards

  • NACE MR0175 / ISO 15156 – sulfide stress corrosion cracking resistance

  • ISO 9001:2015 – quality management system

  • ISIRI – meets Iran Standard & Industrial Research Institute requirements (smooth customs clearance)

  • Explosion protection: Ex d IIB T4 – suitable for Iran’s hazardous petrochemical zones

  • Grid compatibility: 50Hz motor, 380V voltage – direct connection without transformer


After‑Sales & Technical Support for Iran

  • 7×24 technical support – via HYRIG Middle East partner service center

  • Fault response ≤72 hours – on‑site or remote video guidance

  • Spare parts supply ≤15 days for common wear parts (mechanical seals, bearings, gaskets)

  • Full documentation package – English/Persian IOM manuals, inspection reports, certificate of origin, ISIRI clearance documents, material test certificates (MTC)


About HYRIG – Your Complete Centrifugal Pump Partner

HYRIG supplies a full range of API 610 centrifugal pumps for the oil, gas, petrochemical, and refinery industries:

  • OH2 – overhung, centerline mounted

  • BB2 – between‑bearing, radially split, single‑stage

  • BB5 – between‑bearing, barrel type, multi‑stage high pressure

  • VS6 – vertical suspended, double‑casing

We also offer complete Sulzer series replacements, including:

  • Sulzer BBS (BB2 equivalent)

  • Sulzer OHH (OH2 equivalent)

  • Sulzer GSG (multistage ring section)

  • Sulzer ZE (heavy‑duty process pump)

For inquiries, technical support, sizing, or a quotation, please contact us:

info@hyrig.com

HYRIG – Reliable, grid‑ready, and code‑compliant pumping solutions for Iran’s oil, gas, and petrochemical industry.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit