The SY80-50/200 is an API 610 BB2 single-stage, double-suction, radially split between-bearing centrifugal pump, engineered by HYRIG specifically for gasoline transfer in Iran’s refineries, tank farms, and product distribution terminals. It serves as a high‑safety, 100% interchangeable domestic alternative to the Sulzer BBS 32-200, offering identical dimensions, enhanced explosion‑proof protection, and wide temperature adaptability.
Designed for Iran’s 50Hz power grid (380V/400V) and fully compliant with NIOC/POGC safety standards, this pump addresses the critical challenges of gasoline: high volatility, high vapor pressure (40–80 kPa), flammability (flash point -40°C to -10°C, explosion limit 1.4–7.6%), low viscosity (0.5–1.0 mPa·s at 20°C), and ultra‑low sulfur content (≤10 ppm, with trace H₂S). With Ex d IIB T4 integral explosion‑proof construction, wide temperature range -45°C to +80°C (covering Iran’s cold northern regions), low NPSHr ≤3.8m, API 682 cartridge mechanical seal (leakage ≤5 ppm), and NACE MR0175 anti‑sulfide certification, the SY80-50/200 delivers safe, stable, efficient, and low‑maintenance gasoline transfer – ideal for high‑risk tank farms, northern cold‑climate refineries, and continuous refinery product loading applications.
Iranian gasoline (C5–C12 hydrocarbon mixture) presents unique challenges:
High vapor pressure (40–80 kPa) – extreme cavitation risk
High volatility & flammability – flash point as low as -40°C; explosion limit 1.4–7.6%
Low viscosity (0.5–1.0 mPa·s) – requires precision sealing to prevent leakage
Ultra‑low sulfur (≤10 ppm) – trace H₂S possible, requiring anti‑sulfide materials
Wide temperature range – northern Iran (Ardabil, Tabriz) sees winter temperatures below -30°C; southern coastal areas remain hot
Continuous, high‑flow operation – refineries and tank farms operate 24/7
The SY80-50/200 is optimized accordingly:
Low NPSHr ≤3.8m + double‑suction impeller – suppresses cavitation from high vapor pressure gasoline
Ex d IIB T4 integral explosion‑proof design – flameproof joints (gap ≤0.15mm, width ≥12.5mm, Ra≤6.3μm) prevent flame propagation; certified to GB/T 3836.2-2021
API 682 cartridge mechanical seal (carbon‑silicon carbide) – leakage ≤5 ppm; easy replacement without special tools
316L stainless steel wetted parts (standard) – resists trace H₂S and coastal corrosion
Wide temperature range -45°C to +80°C – handles northern Iran winter gasoline without external heating; also suitable for southern regions
High efficiency ≥77% – reduces energy cost for 24/7 operation
| Parameter | Value | Advantage over Sulzer BBS 32-200 |
|---|---|---|
| Model | SY80-50/200 | API 610 compliant; performance curve overlap ≥95% – seamless replacement |
| Type | API 610 BB2, double‑suction, radially split | High pressure capacity; meets Iranian heavy‑duty service requirements |
| Inlet/Outlet | 80×50 mm | Same as BBS 32-200 – direct fit to existing Iranian refinery piping |
| Flow Range | 50 – 150 m³/h | Full BBS flow coverage – tank truck loading, refinery transfer |
| Head Range | 20 – 110 m | Matches short‑distance gasoline pressure requirements |
| Design Pressure | 40 bar | Meets Iran’s high‑pressure hazardous fluid codes |
| Temperature Range | -45°C to +80°C | Significantly better low‑temperature capability than BBS – covers northern Iran winter conditions |
| NPSH required | ≤ 3.8 m | Below industry average – prevents cavitation from high vapor pressure gasoline |
| Motor | 50Hz, 380V/400V (IEC standard) | Direct Iran grid connection – no VFD or transformer needed |
| Compliance | API 610, API 682, NACE MR0175 | Mandatory for NIOC/POGC projects; international anti‑sulfide certification |
| Standard Casing | S‑6 carbon steel + fluorocarbon anti‑corrosion coating | Resists Iran’s high‑salt, high‑humidity (Persian Gulf) and dusty environments |
| Standard Wetted Parts | 316L stainless steel | Suitable for gasoline with trace H₂S; corrosion‑resistant |
| Mechanical Seal | Cartridge mechanical seal (API 682 Cat 2) | Easy installation/removal; leakage ≤5 ppm – meets Iran’s hazardous fluid safety rules |
| Explosion Proof Rating | Ex d IIB T4 | Integral flameproof design (GB/T 3836.2-2021); joint width ≥12.5mm, gap ≤0.15mm, Ra≤6.3μm |
| Hydraulic Efficiency | ≥ 77% | Energy‑saving for 24/7 refinery operation |
Ex d IIB T4 certified – flameproof enclosure contains internal explosions, preventing ignition of external gasoline vapor. All explosion‑proof accessories (cable glands, blanking plugs) match the pump’s rating – no downgrading risk.
Precision flameproof joints – gap ≤0.15mm, width ≥12.5mm, surface roughness Ra≤6.3μm – strictly following GB/T 3836.2-2021.
API 682 cartridge mechanical seal – carbon‑silicon carbide faces, optimized for clean gasoline. Leakage ≤5 ppm. Explosion‑proof gland and sealing compound prevent flammable gas penetration.
NACE MR0175 certified – resists sulfide stress corrosion from trace H₂S in gasoline streams.
Result: Full compliance with Iranian hazardous area regulations (Zone 1/2) – ideal for urban tank farms near Tehran, Isfahan, and other populated areas.
-45°C to +80°C operating range – significantly better low‑temperature capability than Sulzer BBS 32-200. Handles winter gasoline transfer in Ardabil, Tabriz, and other northern Iranian provinces where temperatures drop below -30°C – no external heating equipment required, reducing project cost.
Fluorocarbon external coating – withstands high salt, high humidity (Persian Gulf coast), dust storms, and UV. Outdoor service life ≥8 years across all Iranian climates.
Identical mounting dimensions (center height, flange position, foundation bolt pattern) to Sulzer BBS 32-200 – no piping, baseplate, or motor modification.
Performance curve overlap ≥95% – no process parameter adjustment. Replacement and commissioning completed within 12 hours (including alignment and testing).
Cartridge mechanical seal – pre‑assembled and tested; replacement without special tools, further reducing maintenance time.
Procurement cost 30% lower than original Sulzer BBS 32-200.
Lead time ≤50 days (vs. 120+ days for imports).
Radially split casing – allows internal inspection and rotor removal without disturbing piping. Reduces maintenance downtime and local labor costs.
Precision cast impeller – dynamic balance high accuracy; vibration ≤2.8 mm/s. SKF brand bearings extend trouble‑free operation cycles.
Middle East spare parts warehouse – emergency parts response ≤72 hours; standard spare parts supply ≤15 days. Spare part costs 40% lower than OEM equivalents.
Manufacturer strength: Leading Chinese pump manufacturer with full API 610 certification. SY series designed for gasoline/diesel flammable service with aerospace fluid technology support. Over 50,000 trouble‑free operating hours accumulated in domestic refineries.
Iran references: Successfully installed at a Persian Gulf coastal refinery gasoline loading/unloading pump station – ultra‑low sulfur gasoline service, 50Hz grid, 2+ years continuous operation without failure. Passed NIOC acceptance inspection.
Northern Iran cold region reference: Winter gasoline transfer at a refinery in Ardabil/Tabriz – demonstrated excellent low‑temperature start‑up and stable operation at -30°C ambient conditions.
Bilingual documentation (English & Farsi/Persian) – includes ISIRI compliance reports, Iran project reference letters. Smooth customs clearance and owner approval.
| Application | Specific Role |
|---|---|
| Northern Iran cold region gasoline transfer | Refineries in Ardabil, Tabriz, and other northern provinces – gasoline product transfer, tank farm loading/unloading at winter temperatures down to -30°C. Wide temperature range eliminates need for heating equipment. |
| Urban high‑risk tank farms | Gasoline storage/distribution stations near Tehran, Isfahan, Shiraz – integral explosion‑proof design and low‑leakage sealing meet dense population area safety and environmental requirements. |
| Refinery product gasoline transfer | NIOC refineries, Persian Gulf coastal refineries – gasoline from process units to storage tanks, or tanks to truck/rail loading racks. High flow, continuous duty. |
| Medium‑distance pipeline transfer | From refineries to end users (fuel stations, industrial consumers) – stable, efficient boosting for short to medium distances. |
API 610 (ISO 13709) – design and manufacturing
API 682 (ISO 21049) – mechanical seal standards
NACE MR0175 / ISO 15156 – sulfide stress corrosion cracking resistance
ISO 9001:2015 – quality management system
Ex d IIB T4 – explosion protection (GB/T 3836.2-2021)
ISIRI – meets Iran Standard & Industrial Research Institute requirements (smooth customs clearance)
Grid compatibility: 50Hz motor, 380V/400V voltage options – direct connection without transformer
7×24 technical support – via HYRIG Middle East partner service center
Fault response ≤72 hours – on‑site or remote video guidance
Spare parts supply ≤15 days for common wear parts (mechanical seals, bearings, gaskets)
Full documentation package – English/Persian IOM manuals, inspection reports, certificate of origin, ISIRI clearance documents, material test certificates (MTC), explosion‑proof certificate copies
HYRIG supplies a full range of API 610 centrifugal pumps for the oil, gas, petrochemical, and refinery industries:
OH2 – overhung, centerline mounted
BB2 – between‑bearing, radially split, single‑stage
BB5 – between‑bearing, barrel type, multi‑stage high pressure
VS6 – vertical suspended, double‑casing
We also offer complete Sulzer series replacements, including:
Sulzer BBS (BB2 equivalent)
Sulzer OHH (OH2 equivalent)
Sulzer GSG (multistage ring section)
Sulzer ZE (heavy‑duty process pump)
For inquiries, technical support, sizing, or a quotation, please contact us:
info@hyrig.com
HYRIG – Reliable, grid‑ready, and code‑compliant pumping solutions for Iran’s oil, gas, and petrochemical industry.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.